Specifications

12
1-800-526-4182 • 732-286-1800 (NJ) • FAX: [phone] • www.heyco.com
“ S t a y C o n n e c t e d w i t h H e y c o ” A l t e r n a t i v e E n e r g y P r o d u c t s
Quick
Specs
PANEL THICKNESS WIRE DIA. PART NO. DESCRIPTION FOOTPRINT OVERALL
CLAMPING RANGE RANGE HEIGHT
Minimum Maximum Maximum A x B C
in. mm. in. mm. (2) Wires in. mm. in. mm.
.20˝ (5,0 mm)- S6405
SunRunner
®
Clip
.055 1,4 .125 3,2 .30˝ (7,6 mm)
100 Pack
.97 x .50 24,6 x 12,7 .39 9,9
each cable S6445
SunRunner
®
Clip
Bulk
B
A
C
PANEL THICKNESS
HEYClip
™
SunRunner
®
Cable Clip
Double-Compression Design
SunRunner
®
(above)
SunRunner
®
EZ
(below)
SunRunner
®
EZ with (optional) SunBundler (page 18)
looped through slot
“Coined”
edges prevent
cable damage
Material .025˝ thick 304 stainless steel
PANEL THICKNESS WIRE DIA. PART NO. DESCRIPTION FOOTPRINT OVERALL
CLAMPING RANGE RANGE HEIGHT
Minimum Maximum Maximum A x B C
in. mm. in. mm. (2) Wires in. mm. in. mm.
.20˝ (5,0 mm)- S6407
SunRunner
®
EZ
.090 2,3 .250 6,4 .30˝ (7,6 mm)
100 Pack
.97 x .50 24,6 x 12,7 .41 10,4
each cable S6447
SunRunner
®
EZ
Bulk
HEYClip
™
SunRunner
®
EZ
™
Cable Clip
Double-Compression Design for Panels up to .250˝ (6,4 mm) Thick
C
PANEL THICKNESS
• Robust "double-compression" design
securely holds from (1) 12 gauge
USE-2 to (2) 10 gauge PV-1000V
solar wires.
• Also for use with other cables from
.20˝ (5,0 mm) to .30˝ (7,6 mm)
in diameter.
• Designed to provide a better method
for PV module wire management
and may be used wherever single
or multiple cable management
is needed.
• Smooth clip edges prevent damage to
cable insulation.
• Locking tabs securely fasten clips to
module extrusions, or other panels.
• Generous lead in for installation
without tools.
• Screwdriver slot for easy removal or
movement of clips if necessary.
• Neatly dresses cables on PV panel
frames or along mounting channels.
• Constructed from corrosion resistant
304 stainless steel.
• SunRunner fits module frames up to
.125˝ ( 3,2 mm) thick.
• SunRunner EZ designed for thicker
module frames as well as racking –
accommodates profiles up to .250˝
(6,4 mm) thick!
Wide, Flat
Section for
“EZ” Assembly