Certificate

Disclaimer: This information is believed to be accurate and refers to the laws and products at the date of issue.
However, Heyco Products, Inc. makes no express or implied representations or warranties with respect to the
information contained herein.
November 9, 2010
RoHS Certificate of Compliance
After careful evaluation of EU Directives on Restriction of Hazardous Substances (RoHS),
Heyco Products, Inc. hereby certifies that all product lines including conduit, tubing, liquid tight
fittings, cordgrips, strain relief bushings, bushings, plugs, wire positioning devices, wire connecting,
terminating, IEC connectors, and all metal stamped products are fully compliant to the following EU
Directives:

ELV (version dated 2000 September 18), End-of-Life Vehicle, 2000/53/EC

RoHS (version dated 2003 January 27), Restriction of the use of certain Hazardous
Substances (in electrical and electronic equipment), Directive 2002/95/EC, including
amendment 2005/618/EC (version dated 2005 August 18)

WEEE (version dated 2003 January 27), Waste Electrical and Electronic Equipment, Directive
2002/96/EC

Directive 2006/122/EC of 12 December 2006 for restriction of Perfluorooctane sulfonates
Additionally, none of our products nor packing materials contain any unconditionally banned
substances, including Cadmium (Cd) and its compounds, Lead (Pb) and it’s compounds, Hexavalent
chromium (Cr) compounds, Mercury (Hg) and it’s compounds, and prohibited flame retardants,
namely Polybrominates biphenyls (PBB’s), nor Polybrominated diphenyl ethers (PBDE’s), nor
Polyfluoroalkyl compounds (PFCs) as listed in the table below in concentrations exceeding the
Maximum Trace Level (MTL):
Substance
Maximum Trace Level
(2)
Lead (Pb)
(1)
0.1% by weight (or 1000 ppm)
Mercury (Hg)
Hexavalent Chromium (Cr+6)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
Cadmium (Cd)
0.01% by weight (or 100 ppm)
Polyfluoroalkyl compounds (PFCs), i.e.
 Perfluorooctane sufonates (PFOS) and
 Perfluorooctanoic acid (PFOA)
0.005% by mass (or 50 ppm)
(1) Lead, as an alloying element, is allowed up to 4.0% (40,000 ppm) in copper alloys, up to 0.35% (3,500 ppm) in steel,
and up to 0.40% (4,000 ppm) in aluminum alloys.
(2) The MTL does not apply to applications for which exemptions have been granted to the EU Directives
Regarding the use of decaBDE, which belongs to the group of polybrominated diphenyl
ethers (PBDE's), none of our products contain any banned decaBDE’s.
We anticipate this response satisfies your concerns regarding our products and requirements
for RoHS and WEEE compliance information, if not, please contact us and we will do our best to
provide additional information.
Thank you,
Patrick Sardoni
Quality Manager
Heyco Products, Inc.
1800 Industrial Way North
Toms River, NJ 08755