Quick Start Guide

98mm100mm100mm
98mm 100mm100mm
2. Use instructions
3-02. RGB Backlighting
3-04. Device/Shortcut Keys
7. Warning
6. The name and content of the hazardous substance in the product
Hazardous substances
(Pb)
(Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
Component
name
keyboard body
Metal case
Plastic keys
This form has been prepared in accordance with the requirements of SJ/T 11364.
O : Indicates that the content of the hazardous substance in
all homogeneous materials of the component is below
the limit specified in GB/T 26572.
X : Indicates that the hazardous substance is contained in at
least one homogeneous material of the component.The
quantity exceeds the limit specified in GB/T 26572.
If any liquid enters the product, please immediately disconnect from the computer and remove the
product. Continued use may cause fire or electric shock, please contact the agent for inspection and
maintenance.
Check the product shell regularly for any damage, maintenance operations are outside the scope
Disassembly, replacement of parts, modification or modification without express approval will
cause the user to lose the right of operating the equipment and the warranty failure.
of product compliance requirements.
Quick Start Guide
GK70 MECHANICAL KEYBOARD
Backlight Function Key
TYPE-C USB Cable
FN Keys (27 FN combination keys)Bluetooth Switch
Keyboard Switch Shortcut Keys
Lock Full Key
Lock WIN key
After connected the keyboard to bluetooth devices,it will enter power saving mode if you do not
use it in 1.5 minute,backlight will off. Press any key to wake up this state.If do not use it in 15
minutes, keyboard will enter deep sleeping mode and the current will be less than 100uA. Press
any key to wake up this state.
Wired USB connection:
Connect the USB TYPE-C port to the keyboard,
and
then connect the USB to the computer ,
No need to
install driver software and you
can use it directly as
soon as connnected
to computer. It supports USB
device hot-plug,
plug-and-play.
Bluetooth mode:
Press the button to switch between bluetooth and wire mode.The blue indicator light will on when
under bluetooth mode.When match code,the blue light will flash 2 times per second,until it matches
successfully.After matched code,the blue light flash 1 time(2 times/S) and then keep blue color. If
enter sleep mode. Hold for 3S FN+1,FN+2,FN+3,FN+4 to match bluetooth devices.The name of the
bluetooth is Hexgears-BK1、Hexgears-BK2、Hexgears-BK3、Hexgears-BK4.
the keyboard can not be connected to bluetooth device in 3 minutes,it will exit directly and keyboard
is in blue color,and wired mode in green color. (During charging, the wired mode is in orange color.
Ater full charging, bluetooth mode is in blue color while wired mode in green color.）
Switch for transferring between Wired and Wireless mode: It is bluetooth model when the switch
TYPE-C Interface
3-01. Connection
Connect to Bluetooth device 1
Connect to Bluetooth device 2
Connect to Bluetooth device 3
Connect to Bluetooth device 4
Toggles between USB and Bluetooth modes
Increase backlight brightness
Decrease backlight brightness
Decrease backlight changing speed
Increase backlight changing speed
Key backlight effect mode switch
Side backlight effect mode switch
Key backlight color switch
Side backlight color switch
Backlight switch: Press it to turn off the key backlight. Press it again to turn
off the side LED backlight and turn on the key backlight. Press it the 3rd time
to turn off all the backlight.
Increase side backlight speed
Decrease side backlight speed
Decrease side backlight brightness
Increase side backlight brightness
Toggles of Indicator light color
Lock full key
Full key / 6 key anti-ghosting
Hold for 5s for factory reset
Decrease screen brightness
Increase Screen brightness
3-03. Lighting Customization
Hold Fn+F9 for 3s,enter into light custom edit mode and the indicator light
flash, recording the keys that you want to turn on or turn off or change its
color.Then short press Fn+F9 to save and exit the edit mode. When under
the other light mode, short press Fn+F9 to enter into custom light mode.
Search
Shut down (hold for 5s)
Sleep (hold for 5s)
Lock
Under bluetooth mode,hold 5S to turn on/turn off the keyboard
WIN key locked , press again, unlock
Volume -
Volume +
Mute
Skip back
Play/Pause
Skip forwards
3-05. Media
Keyboard type : Mechanical keyboard
Switch : Kailh Choc Switch
Report Rate : 1000HZ
Switch life : 70 Million Actuations
Function : FN combination function key
Connector : Type-C & Bluetooth
Voltage / Current : DC 5V / 500mA
Handing force : 55±10gf
Keypad : 108 key/Anti-ghosting Cable Length : 1.8m Φ4.0mm braided USB
Weight : 660gSize : 435 x 140 x 30 mm
Macro Key Switch: Press FN+Y,Y/U/I/O/P button lights on. Press Y/U/I/O/P,
get into macro definition function. Press FN+Y again, Y/U/I/O/P button lights
off,macro definition function closed. To use macro definition, macro definition
recording is required firstly.
Macro Recording Function: Press FN+F11,the lights of 5 recording and storage
keys Y/U/I/O/P are keep brighting. Press any of these 5 keys again, all lights off.
And then record all keys that need recording one by one (the relevant key light
is bright). Finally, Press FN+F11 to save and exit.
Fn + Y
Fn + F11
3-06. Macro key
Win2000、 Win ME、 Vista、Android、linux、Windows XP/ 7/8/10 / Mac OS
5. System Compatibility
4. Basic specifications
1. Product introduction
The user interface and other illustrations of the product accessories in the manual are all schematic
diagrams, which are only for reference. Due to the update and upgrading of the product, the actual
product may be slightly different from the schematic diagram. Please refer to the actual product.
© 2019 Hexgears (Dongguan) Co.,Ltd.All Rights Reserved.All trademarks are registered to their respective owners.
MFRS.: HEXGEARS (DONGGUAN) CO . LTD
Add.: Building 9,No.9 Daxue RD,Songshan Lake,Dongguan,P.R. China.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B digital
device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not installed and
used in accordance with the instructions,may cause harmful interference to radio communications.
However,there is no guarantee that interference will not accor in a particular installation.if this
equipmemt does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.
connectec.
FCC Statement
The device has been evaluated to meet general RF exposure requirement.
The devicecan be used in portable exposure condition without restriction.