User's Guide

Hints
ˎ
When you press the (PS) button, the controller turns on and the light bar glows in
your assigned color. The color that is assigned depends on the order in which each user
presses the PS button. The first controller to connect is blue, with subsequent controllers
glowing red, green, and pink.
ˎ
For details on using the controller, refer to the user's guide of the PS4™ system
(manuals.playstation.net/document/).
Charging the controller
With the PS4™system turned on or in rest mode, connect the PS4™ system and
the controller using the USB cable.
Hint
You can also charge the controller by connecting the USB cable to a computer or another
USB device. Use a USB cable that complies with the USB standard. You might not be able
to charge the controller on some devices.
Battery life and duration
ˎ
The battery has a limited lifespan. Battery duration will gradually decrease with
repeated usage and age. Battery life also varies depending on the storage
method, conditions of use and environmental factors.
ˎ
Charge in an environment where the temperature range is between 10 °C and 30 °C.
Charging may not be as effective when performed in other environments.
When not in use
When the wireless controller is not used for an extended period of time, it is
recommended that you fully charge it at least once a year to help maintain battery
functionality.
When disposing of the wireless controller
The lithium-ion battery of the wireless controller is recyclable. When disposing of
the wireless controller, remove the battery and follow local regulations regarding
disposing of batteries.
Caution
ˎ
Remove the battery in a location out of the reach of small children to help prevent
accidental swallowing of small parts such as the screws.
ˎ
Be careful not to hurt your nails or fingers when removing the controller casing.
ˎ
For safety reasons, attach tape or a seal on the metal part of the battery before
disposing.
Notice
Other than when disposing of the wireless controller, never remove the screws and
never remove the battery from the wireless controller.
1
Disconnect the USB cable from the wireless controller.
2
Using a crosshead screwdriver, remove the screws (4 places).
3
With the front of the controller pointing up, press in the direction of the
arrows to open the cover.
4
With the rear of the controller pointing up, remove the cover.
5
After disconnecting the connector, remove the battery.
Connector
Battery
EN
Precautions
Before using this product, carefully read this manual and any manuals for
compatible hardware. Retain instructions for future reference.
Safety
ˎ
Do not handle damaged or leaking lithium-Ion batteries.
ˎ
If you come into contact with material from a leaking battery, take the following
actions:
ˋ
If the material gets into the eyes, do not rub. Immediately flush the eyes with
clean water and seek medical attention.
ˋ
If the material comes into contact with the skin or clothes, immediately rinse
the affected area with clean water. Consult your physician if inflammation or
soreness develops.
ˎ
Avoid prolonged use of this product. Take a break at about 30 minute intervals.
ˎ
Stop using this unit immediately if you begin to feel tired or if you experience
discomfort or pain in your hands or arms during use. If the condition persists,
consult a doctor.
ˎ
This product is intended for use with the hands only. Do not bring it into close
contact with your head, face, or the bones of any other part of the body.
ˎ
The vibration function of this product can aggravate injuries. Do not use the
vibration function if you have any ailment or injury to the bones, joints, or muscles
of your hands or arms. You can turn on or turn off the vibration function from
(Settings) on the function screen.
ˎ
Permanent hearing loss may occur if the headset or headphones are used at high
volume. Set the volume to a safe level. Over time, increasingly loud audio may
start to sound normal but can actually be damaging your hearing. If you
experience ringing or any discomfort in your ears or muffled speech, stop
listening and have your hearing checked. The louder the volume, the sooner your
hearing could be affected. To protect your hearing:
ˋ
Limit the amount of time you use headset or headphones at high volume.
ˋ
Avoid raising the volume to block out noisy surroundings.
ˋ
Lower the volume if you can't hear people speaking near you.
ˎ
Do not stare at the light bar on the controller when it is blinking. If you experience
discomfort or pain anywhere in or on your body from light stimulation,
discontinue use immediately.
ˎ
Never disassemble or modify the product.
ˎ
Do not expose the product to high temperatures, high humidity or direct sunlight.
ˎ
Do not allow the product to come into contact with liquids.
ˎ
Do not put heavy objects on the product.
ˎ
Do not throw or drop the product or subject it to strong physical shock.
ˎ Do not touch the ports or insert any foreign objects into them.
Use and handling
When using the motion sensor function, be cautious of the following points. If the
controller hits a person or object, this may cause an accident, injury or damage.
ˎ
Before use, check that there is plenty of space around you.
ˎ
When using the controller, grip it firmly and make sure it cannot slip out of your
hand.
ˎ
If using a controller that is connected to the PS4™ system with a USB cable, make
sure that the cable will not hit a person or object. Also take care to avoid pulling
out the cable from the PS4™ system.
Exterior protection
Follow the instructions below to help prevent the product exterior from
deteriorating or becoming discolored.
ˎ
Do not place any rubber or vinyl materials on the product exterior for an extended
period of time.
ˎ
Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals.
Do not wipe with a chemically-treated cleaning cloth.
Pairing the controller
The first time you use the controller or when you want to use the controller on
another PlayStation
®
4 system, you must pair the controller and PS4™ system. Turn
on the PS4™ system and connect the controller with the USB cable to complete
pairing.
Light bar
To the PS4™ system
USB port
USB cable
Specifications
Input power rating DC 5 V, 800 mA
Battery type Built-in lithium-ion battery
Voltage DC 3.65 V
Battery capacity 1000 mAh
Operating temperature 5 °C to 35 °C
Mass Approx. 210 g
PS4 SPIKE CONTROLLER
Instruction Manual
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.