User Manual

GA61-Verm.2-TX
Operator Manual
ELECTRICAL SPECIFICATIONS
Temperature Range -30
o
to +70
o
Celsius
Supply Voltage Range 3.0-5.5 VDC
Inputs TX Recognition (Reed), Lockout Pulse (Piezo
Switch), Run and Turn-off Buttons, Receiver
TTL
Outputs LEDs (Red/Green), Vibrator, Buzzer,
Antenna Switch, TX Standby, TX TTL
Run and Turn-off Button Delay 2 seconds
OPERATIONAL DESCRIPTION
• Pressing the Transmitter Lockout button starts the Transmitter and selects the Lockout mode.
• Pressing and holding the Transmitter Run button for 2 seconds selects the Run mode.
• Pressing and holding the Transmitter Stop Button for 2 seconds turns off the transmitter.
• Low Battery indicator is tripped at 3.15 volts; the transmitter power is turned off at 2.70 volts.
• The Transmitter can select either RUN or LOCKOUT mode. The GA61-Verm.2-TX controls lights, buzzer and
vibrator to indicate system status.
• Transmitter Indicator (LED/Buzzer/Vibrator) functions are given in Table 1.
COMPLIANCE
This device has been tested and found to be compliant with Part 90 of the FCC Rules and
Regulations. Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Project:
GA61-Verm.2-TX
PRELIMINARY
Description: Transmitter
The GA61-Verm.2
Configured as a
Directional Drill Control
1. RUN Button
2. LOCKOUT Button
3. OFF Button
4. RUN Light
5. LOCKOUT Light
RUN
LOCKOUT