User’s Manual ERGOF-2G4
1. DESCRIPTION The ERGOF-2G4 is a 2.4GHz MFS Transmitter that has eight panel switches that can be configured with 1~3 step switches. It has four digital inputs dedicated to the left and right single step side switches, two digital inputs for toggle switch with 3 states, and one digital input for E-Stop switch. All switches (except EStop) have configurable DK assignments; a maximum of 3 DKs can be assigned for each switch.
. FUNCTIONAL DESCRIPTION 3.1.Transmitter Layout 3.2.Switch Operations S1: Power ON SW / DK1 Start SW S2, S11, S12: momentary switches S3-S10: 3-steps capable momentary switches S13, S14: remain switches S15: Emergency Stop SW / Power OFF 3.3.Control Signals to Receiver The coder is set to transmit 32DK telegram. A switch can be assigned with a maximum of 3DKs except for the Stop SW (DK31). The Start SW is also fixed with DK1 in addition to the 3DKs that can be assigned to it.
3.4.Power Supply Functions • Without the Stop key, it is not possible to switch ON the transmitter. • Upon pressing the Start switch, the transmitter will check for a valid RFID in the Stop key. After a valid RFID has been verified, the transmitter will continue power ON operation and enter [Transmit] mode to start transmitting non E-Stop telegrams. During this time, all DKs will remain in neutral status except DK1 and DK32 until the start key is released.