Specification Sheet

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - elettromedia.com
All Specifications Subject to Change Without Notice_19.A
12
hertzaudiovideo.com
CS 250 S4
COMP SUBWOOFER
700 W
1. Electroacoustic design optimized for enclosures starting from 16 liters.
2. Fluid dynamic optimization system that drastically reduces the acoustic
distortions generated by the air compression at high excursions.
3. Polypropylene cone and dust cap geometry engineered through FEM
simulations for low frequency distortion reduction.
4. 35 mm 4 Ω voice coil wound on six layers of pure copper on a high thermal
resistance glass fiber support.
5. Magnetic group geometry optimized with proprietary software for high
undistorted SPL at high excursions.
6. Ideal for use in custom boxes that can be shaped around the subwoofer
thanks to its compact size and lack of the decompression hole.
7. Terminal block featuring solid push contacts that accept cables up to 8 AWG
to offer low wiring resistance and maximum ease of connection even in
installations with multiple subwoofers.
8. Rubber protection of the magnetic assembly and high-strength ABS plastic
gasket allowing the application of the optional grille for an elegant finish.
A 270 mm 10.63 in.
B 231 mm 9.09 in.
C 132 mm 5.2 in.
D 115 mm 4.53 in.
E 260 mm 10.24
F 28,3 mm 1.11
ELECTRO-ACOUSTIC PARAMETERS
D mm 216
Xmax mm 12,5
Re Ω 3,6
Fs Hz 30
Le mH 3,33
Vas I 34,5
Mms g 154
Cms mm/N 0,18
BL
T•m
13,7
Qts 0,52
Qes 0,56
Qms 9,4
Spl dB 84
TECHNICAL SPECIFICATIONS
Component Subwoofer
Size
Woofer mm (in.) 250 (10)
Voice Coil Ø
Subwoofer mm (in.) 35 (1.38)
Power Handling
W peak 600
W continuos 300
Impedance Ω 4
Frequence Response Hz -
Subwoofer Magnet size
D x d x h
mm
(in.)
120 x 45 x 34
(4.72 x 1.77 x 1.34)
Weight of one component kg (lb.) 3,795 (8.37)
Subwoofer Magnet High density flux ferrite
Cone Polyproyilene
Xmech mm (in.) 16,5 (0.65)
D
B
A
C E
F
Optional