User Guide

HermanMiller Embody

Chair Adjustment Guide1

Seating that

performs for you.

HermanMiller

Embody

Chair

Seat Depth: Front handles on the right and le sides of the seat

Seat Height: Joystick inside tilt tension knob, right side of chair

To increase or decrease depth:

Li your thigh weight from the front

of the seat. Gently li up the front

handles on the right and le sides of

the seat to disengage the locking seat

depth adjustment. Slide seat forward

or back into proper depth for use; then

release downward to lock the seat.

In the proper position, you will have approximately three-ngers of clearance

between the back of your knees and the seat edge.

Only available on some models.

To raise seat:

Angle the joystick fully and li your

weight to raise the seat height to the

desired level.

To lower seat:

While seated, angle the joystick fully

and lower seat.

At the proper height, your feet should rest flat on the floor.

Tilt Limiter: Back horizontal tab on le side behind seat

Tilt Tension: Knob below right side of seat

Only available on some models.

To engage:

Recline and move tab up to dene

the limit of recline.

To release:

Lean forward and flip tab fully

downward.

Engage the tilt limiter when you want to sit in an upright or partially

reclined position.

To increase tension:

Turn knob clockwise.

To decrease tension:

Turn knob counterclockwise.

Set the tilt tension to control the resistance you feel when leaning back.

PAGE 1
HermanMiller Embody Chair ® Seating that performs for you. Seat Height: Joystick inside tilt tension knob, right side of chair Tilt Tension: Knob below right side of seat To raise seat: Angle the joystick fully and lift your weight to raise the seat height to the desired level. To increase tension: Turn knob clockwise. To decrease tension: Turn knob counterclockwise. To lower seat: While seated, angle the joystick fully and lower seat.
PAGE 2
Arm Height: Button underneath each arm BackFit™ Adjustment: Knob on right side behind seat. Only available on some models. To raise arms: Grasp arms while pressing button on the underside of each armpad and pull up to desired position. Release button to lock. For a flat back, rotate forward: Turn the BackFit adjustment knob clockwise to the full forward position or move it slightly back by turning knob counterclockwise.