User's Manual

BLUETOOTH KEYBOARD BOOKCOVER
Galaxy Tab A (2019,10.1’’)
1. Press “Power” key for 1s , the power indicator turns on 3s , then turns off.
2. Press “Fn” and “C” keys at the same time , keyboard enters pairing mode , bluetooth pairing
indicator Ѥɇϑ˵ʪϑɵlue.
3. Turn on your tablet’s bluetooth function, click the pairing name “ITFIT Bluetooth Keyboard”
on your tablet screen.
4. Keyboard and tablet connect successfully, bluetooth pairing indicator turns off.
Connecting steps
All
~
`
!
1
@
2
#
3
$
4
%
5
^
6
&
7
*
8
(
9
)
0
_
-
+
=
Backspace
Delete
Tab
QWERTYUI OP
{
[
}
]
|
\
Caps Lock
ASDFGHJKL:
;
“
‘
Enter
Shift
ZXCVBNM<
,
>
.
?
/
Ctrl Fn Alt
Home
PgUp
PgDn
End
CtrlAlt
Shift
General usage steps
When there is not any operations in 30 minutes, keyboard will enter into energy-saving mode.
• Pressing any key and wait for 3s, keyboard will be back to work mode.
Energy-saving Mode
In Pairing Mode, if keyboard doesn’t connect with device within 3 minutes, it stops pairing.
You need to press “Fn” and“C” keys again to active Pairing Mode.
RoHS
REACH
SVHC
CP65
Made in China
Other views to fold
( Left )
( Right )
Low Battery Mode
• The power indicator will Ѥɇϑ˵ͱce per 2s when low power occurs.
All
~
`
!
1
@
2
#
3
$
4
%
5
^
6
&
7
*
8
(
9
)
0
_
-
+
=
Backspace
Dele te
Tab
QWE RTYUI OP
{
[
}
]
|
\
Caps Lock
ASDFGHJ KL:
;
“
‘
Enter
Shift
ZXCVBNM<
,
>
.
?
/
Ctrl Fn Alt
Home
PgUp
PgDn
End
CtrlAlt
Shift
BookCover
Keyboard
Indicator
Caps Lock (White)
Bluetooth Pairing (Blue)
Power on (Green)
Low battery (Red)
Charging
(Red/Green after fully charged)
Accessories
1. A BLUETOOTH KEYBOARD BOOKCOVER
2. A User’s manual
3. A USB cable
①
②③
Anglʪ 100°
Notice
Model No. GP-JCT515SAABW
Bluetooth working distance 10 meters
Working voltage 3.0-3.7V
Working current  2.5mA
Charging current  200mA
Sleeping current < 0.05mA
Re-connect time 3 seconds
Reworking time 2 seconds
Charging time 2 hours
Lithium battery capacity 250mAh
Working time 100 hours
Standby time 80 days
Working temperature -10জ~+55জ
Speciѣcation of Keyboard
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes orͱʒѣcations to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
1. Connect keyboard USB B port to keyboard charge port.
2. Connect USB A port to power adapter or PC USB port.
3. The power indicator will turn red while charging,
it will turn to green after fully charged.
Charging
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable condition without restriction.
FCC ID：2ASLB-TYPE-A
Manufacturer : HenSimLab Co., LTD
ADD:
No 2, RD HengKengZai, Xiangdong Village, Dalinshan Town, Dongguan China
Copyright 2019 ITFIT All rights reserved