Use and Care Guide

ManualsBrandsHenry Company ManualsReflective Roof CoatingsHE555019

Henry

Company, 999 N. Sepulveda Blvd., Ste. 800, El Segundo, CA 90245

Tel: 800-486-1278 Email: techservices@henry.com

www.henry.com

Revision Date: 5/17/2017

TECHNICAL DATA SHEET

Henry

555

Fibered Aluminum Roof Coating

Physical Property

Typical Value

Test Method

Appearance

Black liquid with silver pigment

Solids by Weight

52% minimum

ASTM D2824

Solids by Volume

43% minimum

ASTM D2697

VOC

400 g/l maximum

EPA Method 24

Weight per Gallon

7.7–8.3 lbs.

ASTM D2828

Brookfield Viscosity

4,000–7,000 cPs

ASTM D2828

Tensile Strength Film, Initial

135 psi minimum

ASTM D2370

Solar Reflectance per CRRC

0.53 initial and 0.42 after 3 years

ASTM C1549

Thermal Emittance per CRRC

0.50 initial and 0.56 after 3 years

ASTM C1371

Solar Reflectance Index (SRI) per CRRC

48 initial and 33 after 3 years

ASTM E1980

Aluminum Content

>9%

Water Content

0.3 maximum

Flash Point

105 °F (40 °C) minimum

ASTM D3278

Application Temperature (Ambient)

40 °F (4 °C) and rising

Approvals and Certifications

 ENERGY STAR

Certified

 Cool Roof Rating Council (CRRC) Rated Product: Product ID# 0620-0040

 Meets or exceeds ASTM D2824, Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Type III

Description

Henry

555 Fibered Aluminum Roof Coating is a premium fibered aluminum coating that forms a tough, reflective, weathering

surface. It can help decrease air conditioning costs by reducing heat transfer through the roof.

Features

 Two-in-one benefits:

o Water-resistant

o Stops rust on metal roofs

 Seals hairline cracks and pinholes

 >50% solar reflectance per ASTM D2824, Type III

Product Size

1 gallon, 5 gallon

Usage

 Recoating roofs previously coated with asphalt emulsion or aluminum coatings

 Asphalt roofs, including Built-Up Roofing (BUR) and Modified Bitumen (MB)

 Metal roofs

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA SHEET Henry® 555 Fibered Aluminum Roof Coating Physical Property Typical Value Appearance Black liquid with silver pigment Test Method - Solids by Weight 52% minimum ASTM D2824 Solids by Volume 43% minimum ASTM D2697 VOC 400 g/l maximum EPA Method 24 Weight per Gallon 7.7–8.3 lbs. ASTM D2828 Brookfield Viscosity 4,000–7,000 cPs ASTM D2828 Tensile Strength Film, Initial 135 psi minimum ASTM D2370 Solar Reflectance per CRRC 0.53 initial and 0.
PAGE 2
® Henry 555 Fibered Aluminum Roof Coating Application Clean: Before coating the roof, use a pressure washer or high pressure nozzle and water hose to wash the roof with a non-filming detergent, such as TSP or TSP substitute. Use appropriate pressure and take caution not to inject water into the roofing substrate. In areas with stubborn dirt, grease or other contaminants, use a stiff bristle brush or broom to scrub the areas clean with additional water and non-filming detergent. Treat algae or moss.
PAGE 3
® Henry 555 Fibered Aluminum Roof Coating Limited Product Warranty We, the manufacturer, warrant only that this product is free of defects, since many factors which affect the results obtained from this product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are all beyond our control.