english capacity will be weaker and t 4.2 4.
1 18 1W 1W 67.0 1W 146.2 1W 118.8 1W 123.0 1W 127.3 1W D743I 1W 131.8 1W D332I 1W 136.5 1W D243I 1W 127.3 1W D606N 1W 136.5& D462I 1W D731I 1W 141.
Warnings Product safety and RF Exposure for two way radio: Before using this two way radio, please read the manual which contains important operating instructions for safe usage, RF Energy Awareness, control information and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards, and also read the operational instructions for safe use. 2) Switching to other antennas is prohibited and will affect the radio performance.
WARNING CAUTION WARNING Battery Charger Safety Instructions 1. Turn the radio off when charging the battery. 2. Do not expose the charger to outside environment. Chargers should only be used indoors. 3. Do not operate or disassemble the charger. Do not use a charger that has been dropped or damaged in any way. 4. Never alter the AC cord or plug provided with the unit. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician.
For Vehicle with Air Bags Refer to the vehicle manufacturer’s manual prior to installation of electronic equipment to avoid interference with air bag wiring. Do WARNING not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle.
radio could violate FCC rules. of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. Note: Use WARNING WARNING WARNING SAFETY INFORMATION Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%.