Quick Guide

Quick guide to Bluetooth keys

1) Power on:

A: Turn the top Power key to the left once to enter pairing mode with your Andro

id phone.

B: Turn the top Power key to the left twice to enter the pairing mode with the iO

S phone.

2) Shutdown: Turn off the Power key at the top to the far right.

3) Pairing with a smartphone:

A: Press any key once in Android mode. When the green light flashes quickly, use

your Android smartphone to search for "help2Type" via Bluetooth and pair the c

onnection.

B: Press any key once in iOS mode. When the green light flashes quickly, use the i

Phone to search for "help2Type" via Bluetooth and pair the connection.

4) Operate the mobile phone through Bluetooth button:

A: first, change the input method from the smart phone to "Gboard", and add th

e Swiss German keyboard into the > language of the multi-language input in Gbo

ard.

B: After setting, you can input the corresponding character to the smartphone ac

cording to the screen printing on the Bluetooth button. The symbol of yellow scr

een printing is the combination of CMD + letter keys; The symbol for the blue scr

een is a combination of fN + letter keys.

For example: Enter "{", then hold CMD + j. Type "*" and hold fn + M. To turn on k

eyboard lights, press and hold CMD + spacebar.

5) Charging: Charging is carried out through the charging interface at the bottom

connected by the Type-C charging line.

NOTE: This equipment has been tested and found to comply with the limits

for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate

radio

frequency energy and, if not installed and used in accordance with the

instructions,

may cause harmful interference to radio communications. However, there is

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which

PAGE 1
Quick guide to Bluetooth keys 1) Power on: A: Turn the top Power key to the left once to enter pairing mode with your Andro id phone. B: Turn the top Power key to the left twice to enter the pairing mode with the iO S phone. 2) Shutdown: Turn off the Power key at the top to the far right. 3) Pairing with a smartphone: A: Press any key once in Android mode. When the green light flashes quickly, use your Android smartphone to search for "help2Type" via Bluetooth and pair the c onnection.
PAGE 2
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.