BioSense health band QUICK START GUIDE
1 BioSense health band Packing List The box contains the following items BioSense health band USB C cable Card info Charging Base
BioSense health band How to operate 1. Insert the USB C cable into the charger base socket. 2 2. Put the BioSense onto the charging base and align the metal contacts on the back of the band with the gold pins on the charging base while placing. the device and the charger will line up with magnets in the right direction. 3. Place the charger on the deck with the BioSense sideways 1 Input voltage: 5V DC. Charging time: about 2 hours.
2 3
BioSense health band How to operate 4. Power On Press and hold on the button to power on 2 5. Power Off It will be functional only through the App 6. APP Download Download the HELO Smart App from the App Store, Google Play Store or HELO App STO. Note: To use “HELO Smart App” on an iPad, you need to select “iPhone only” when downloading it from the App Store 7. Compatibility & Support Support Android 5.0 or above, iOS 10.0 or above 8.
5 3 1 2 2 4 1 Power ON button 2 ECG & BIA electrodes 3 LED light 4 BP, SpO2, APG sensor 5 HELO Pay chip inside
BioSense health band Introduction for important features 3 Heart rate monitoring In order to monitor heart rate more accurately, please wear the band approximately one finger away from the wrist bone. NOTE BioSense is only lor swimming. lf you wear BioSense lor diving, it may cause damage to the device. Such damage is not within the scope of the warranty.
BioSense health band More information Waterproofing instructions The waterproof leveI of BioSense is IP68 (50m). 4 NOTE 1. Swim, shower and washing hands only under cold water. 2. BioSense does not have a waterproofing effect on seawater, acid and alkaline solution, chemical reagents and other corrosive liquids. lf inadvertently encounter or contact with corrosive liquid, please clean with clear water and dry the device.
5 BioSense health band Tech Sheet Process description Basic 1. Wristband material: liquid silica gel + PA two-color coating, surface drying pattern + 2. Heart electrode: stainless steel 316L + pvd gold 3. Bottom shell: PA embedded 2 pieces of 316L stainless steel + PVD + 2PCS POGO pin size --- weight --- color built-in storage Hardware APP RAM: 256KB, ROM: 1Mbit, external 8MB iOS 10.0 or above, Android 5.
Category Battery Standard Voltage capacity size Lithium polymer 3.8 V 45 mAh 19.5*11*2.5 mm. Health Features: Heart Rate, Respiratory Rate, Energy, Stress, ECG, BIA, APG, Blood Pressure, Blood Oxygen, Arrhythmia Detection, Temperature, Sleep App HELO Smart Activity data: steps, calories, standing Guardian, heart rate, respiratory rate, blood pressure, blood oxygen, temperature, atrial waterproof level charging time Other data strap size strap material IP68 2 hours 140-200 mm.
FUNCTIONS HR Support to turn on/off 24-hour automatic measurement, the automatic measurement interval is measured once every 10 minutes (the whole point: 00, 10...) Support manual measurement, app initiated BR Support turning on/off 24-hour automatic measurement (determined by whether the heart rate is turned on/off), and the automatic measurement interval is measured once every 10 minutes (the whole point: 00, 10...
HR Guardian BR BP APP settings, show alert by led light, send email SpO2 Activity data Body temperature Steps Calories APP display Stand Electrode ECG Distribute the left and right sides of the bracelet host, used for ECG/BIA measurement BIA pads on both sides respectively (write the measurement precautions on the APP and attach the operation gesture diagram) and thumb respectively, and the left and right hands cannot touch each other (the measurement precautions are written on the APP and the o
Fingertip LED Light LED LIGHT STATUS When manually starting SpO2/BP/APG/ECG measurement, the red light will light up after touching your finger Orange Green R:90 G:190 B:50 R:0 G:160 B:220 LED lights Light blue R:255 G:160 - B:0 Red R:230 G:0 B:0 Flicker Low battery ≤20%, flash once every 5 minutes Flicker Bracelet charging, flicker once every 1 second Always bright Fully charged bracelet Remove the charger light off Flicker When requesting a measurement (via smartphone), flicker once eve
BioSense health band Device Manteinance Device care 6 1. Do not use any sharp objects to clean the device. 2. Avoid using chemical cleaners, solvent solutions or insect repellents that might damage plastic components of the device. 3. Thoroughly rinse the device with clean water after exposure to chiarine, salt water, sunscreen, alcohol, cosmetics or any other harsh chemicals. Prolonged exposure to these substances may damage the device. 4. Avoid pressing the keys while under water. 5.
BioSense health band Important safety and product information 7 • If you have a pacemaker or other internal electronic device, consult with your physician before using a heart rate monitor. • The BioSense optical wrist heart rate monitor will occasionally emit green light and flashes. Consult with your physician if you have epilepsy or are sensitive to flashes of light. • Always consult your physician before beginning or modifying any routine or exercise program.
BioSense health band Legal disclaimler Some measurements require the installation of HELO Smart App available for An droid OS 5.0 or later and for Appie OS version 10.0 or later. 1. HELO BioSense has a water resistance rating of 50 meters according to ISO standard 22810:2010. The devi ce can be used for shallow-water activities like swimming in a pool or ocean.
Thank you!
IC This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.