User Guide

Hi,have a nice day!

Pls kindly follow below.

First of all, pls delete the extra cameras in the parent unit’s system.

If the camera with *, it means the camera has been added.pls delete the

camera 2*, camera 3* and camera 4*,only leave/keeping the camera 1*.

1.press“OK”button,back to the main menu.

2. In the main menu interface, to find “camera” ,pls delete the camera 2*, camera

3* and camera 4*,only leave/keeping the camera 1*.

PAGE 1
Hi,have a nice day! Pls kindly follow below. First of all, pls delete the extra cameras in the parent unit’s system. If the camera with *, it means the camera has been added.pls delete the camera 2*, camera 3* and camera 4*,only leave/keeping the camera 1*. 1.press“OK”button,back to the main menu. 2. In the main menu interface, to find “camera” ,pls delete the camera 2*, camera 3* and camera 4*,only leave/keeping the camera 1*.
PAGE 2
PAGE 3
. After completing the above operation, you have successfully deleted an extra camera,if you have camera 3* and camera 4* ,Also delete them as above way, only leave/keeping the camera 1*.Then press“OK”button again,back to the main menu,the extra cameras have been deleted,you will get the interface like below.
PAGE 4
Secondly, pls pair the camera 1* again 1.Press the MENU button then the main menu will show up,In the main menu interface, to find “camera” ,then press ▲ button or▼ button to select the camera 1* 2.
PAGE 5
3.The 4.Pull will off plug be showed from the on the back of LCD screen. baby unit/camera.
PAGE 6
5.Press and hold(keeping) 6.Re-plug the plug into button before re-pluging the PAIR button. DC jack. plug.
PAGE 7
. Release the PAIR button after you have re-pluged the plug
PAGE 8
. .
PAGE 9
To finish these two steps, your problem may be solved.