AFFECTATIONS mmo s neon ins a BACKING LIST noon o PRODUCT OVERVIEW mms mere 2 HARD DISH DRIVE INSTALLATION AND SYSTEM CONNECTIONS Byrd Dirk Drive installation System Connections OPERATE DVR SYSTEM WITH A MONITOR oe Startup Wizard oa Ee ides -12 Hard Disk Drive Formatting -13 Video Recording ces Video Playback Explanation of playback modes Common Playback «= = vss sees eee 15 Ane PARE cc cc vn eee eee 18 HEMINGWAY
Please dla not pace any container with quid such as ware; coffees, or beverage on the DVR. Please put the VR at a ventilated space and do nat black the alr vents. Forth system security, please use the origins power supply provided. Chiclets parer voltage in sate of any damage dug to the wrong voltage. Please obey tne local security regulations and policies when installing the product.
= [Frm [free == [ees (Jes Fran pv Screw *4 Resew set 4 {For Hard Disk Drive} {For Cameras) *Heifer is any part missing or damaged, please contact Revisionism support.
AHD Camera Installation Hole Stand Idlers LCi Wight Vision BNC Ides Output Sensor Power Cable Sp litter Female Connector tale Connector
d-in-1 video/Power Cable Power Connector (Female) Ides Cannabis Power Connector (Male) video Connector IMPORTANT: To rector videos ard play the historical divas, the installation of the Hard Disk Drive Is 8 must, Otherwise, you ean ably watch the ive video, A Hard Disk Drive Is not included in this DVR system, This VR system works with 2 3.5" DATA Hard Disk Drive, The Hard Disk Drive should te Mediator after it's installer.
Step 1: Unscrew the screws and remove the upper cover of the DVR. Step: Connect the DATA power cable and data cable of the DVR tithe corresponding ports of the Hard Disk Drive. Step: Hold the Hard Disk Drive and the DVR together, carefully tur then over, then align the screw holes an the Hard Disk Drive with the screw holes on the VR housing.
Do nok Fix the AHD camera bare you can view the image on the monitor and confirm the ideal position ta install Plugs power adapter into the DVR and the socket to power on the DVR, Connection a monitor to the HD Output or VBA Output on the DVR with an HIM cable or VGA cable (not Incidence.
Connect the Yellow Ides Connector to the BRC Ides Input on the IVR, and connect the Red Power Connector 1 the Male Connector of the Power Cable Sp litter. reef Connect the Fern ale Connector of the Power Cable Sp litter with another pow: adapter.
fer connecting the DVR and cameras to power, walk for 2-3 minutes, A Startup Wizard wl start to guide you via a serfs of pop-up windows. Connect the USB mouse to the DVR, then click Next until you see the window of Time-Language Configuration. Select the time zone, date formal, ime format, language, and set the Ume for your DVR system.
Tips: Please keep your password safe. You ean enable the option of Remember the password on the page of logging in. you forget the password, please refer to G2 of TROUBLESHOOTING. Select safety questions and enter the answers for resetting the password If necessary. You can also enter your malt backfires for getting the verification code to reset te password. Please ensure that your email Sod iit sak hack f the network transaction status s alumna. not, yea can configure it by clicking Newark.
Scan the QR ace to get the Serial Number of your DVR system and download dre App armed Meyer inch your mobile device, Ee en peep Bits pink ths seaman Sahel pans re ed pray * Click OK to exit the wizard, You can right click on the screen, then go to Main Menu > Startup Wizard to bring it uty again.
You will see the five dives from the AHD cameras in split-screen moc (4 censers with 1080F resolution by default) after exalting the wizard. f you need ta watch mare screens at the same time, please right click, go to Main Menu > System = Dial > Channel Type, check the box before 8 and click DK, then the MYR will bast automatically and you can right clix io select § screens with 1080N resolution.
install the Hard Disk Drive first, then right click and go to bani Menu » Advanced > Storage to check if the type is Read Write or the status is Normal. nat, please click Format Storage to start Formatting your Hard Disk Drive. Right click on tha screen, then go to Man Menu > Record > Record Cong. to set the record mode and record plan, This DVR is set to record videos 24 hours a day by default.
Model: Set the recording mode and the options are Schedule, Manual and Stop. * Schedule: The camera will record videos according to your record plan. * Manual: The camera will record standard videos 24 hours a day. * Stop: The camera will stop recording videos. [Record Plan]: Set the recording schedules. “Week and Period 1/2/3/4: Set the time periods) of each day to record different types of ideas. * Regular: Tha system will continuously record standard ideas during the time period(s) you set.
1. Common Playback Select the channel fup to 4 channels at the same time), a period and a date an Blu background to play all types of videos recorded.
Area for Vedas Playing Playback Buttons Timeline Playback Modes Filters Filtered Videos List R=: Standard Videos Me Videos Recorded When the Samara Detects Motion Detailed Info.
Play/Pause Reverse o play 2) Stop Playback in slow motion G9 Fast Reverse Fast Forward @ Previous Frame ee) Less Frame Previous Video Gm Next video CR Repeat to play all the videos = Gay radar on the lactated day (o) Full screens Start/End dives cutting 02) Backup Tips: You ean click the (2) from to cut a video, then click (3) to back up to the external storage. Previous Frame and Next Frame work only wham pausing the video.
2, Sync Playback This function sims to put the vicious from different channels at the same time to compare, Select 2 channels at least channels), a period and a date on Blue background to play the Historical videos simultaneously at the selected time on the same timeline. 3. Day parting This function aims to put the videos from the same channel huts different time to compare, Select a channel, number of split screens, and a period t play the videos recorded from this channel on different timelines.
Mote: Vou need to press and hold the left mouse and move on the bar of Period to select time period. 4. intelligent Fast Playback This function sims o play the videos recorded when motion selected at a fast speed which includes x2, 14,16 and 4B. Alarm 1s not available as another lama device Is required. bias choose thf on the We rt 5. Intelligent Retrieval This function aims to help you find out the exact videos you need.
EET LO FEE step d: Select Channel, Start Time and End Time, then click Add to display all the filtered videos. Step 4: Check the box to select the video files and Backup forms, then click Start to back up the videos.
Tips: The format of the USE Drive should be FAT 32. An alternative solution to backup the videos Is listed below. * Goth the interface of video playback and click 5 to show the filtered video list “Che the box ta select the videos. “Click 2 to start backing up, The next sips ar the same as the first solution mentioned above.
IMPORTANT: You tan select to enable Motion Detection, Video Loss and Video Blind as needed, The camera will start to record videos when it detects motor. Channel): Select the channel you'd lie to enable motion defection. [Enable]: Check the box to enable motion detection. [Sensitivity]: ff you select higher sensitivity, the camera will be more easily to be triggered to start recording videos. Its advised or select Middle to balance the accuracy and effectiveness of the alarm, this reducing the raise alarms.
[Period]: Setup to time periods for each day to send the alerts when the camera detects mason, [WD Interval: Set the time interval of two alerts. Ic aims to decrease the frequency of the alerts caused by the same moving object. Terminate Not available, Outbalance: Not available, record Bacchanal: The selected channel(s} will start recording when the current channel detects motion.
biL aE Lath i RCL [Send Email Before enabling this function, please go to Man Menu » System > Net Service, then double cock on EMAIL caption to set up your mall address to receive the alerts. [Buzzer]: After enabling this function, the camera will give out alarm sound when motion is detected. Ii rite Log: The lings of the alerts will be written into the stern once you enable this function. You can go to Mal Mer > Info = Log to check she detailed log information.
Right click an the main menu ard sack X| control oo start setting up your camera. Cons fog Bit Fore pres H Ee] Fas pros Vita wen ne Hae fan pied ln * if the five video from the caner Is mirrored or flipped, you ean check the box before Mirroring or Overturn If you sel something rang, please click Re stare Ln get back Lo default settings. IMPORTANT: Please make sure the DVR system hes been connected ta your router via the Theme cable. You can check the network connection status from the Startup Wizard.
Search and download Meyer into your mobile device farm App Starveling Play or scan the OR codes below ta download. Er Lo i Imaginative nation to download and install the App Ts to scan the GR code from the Startup Wizard, Launch Meyer App after installing, then flow these steps to add the IVR system.
Sep 1: Register ani account with your mall address. You will get a code by mall to set a user name and password. re Cit Step: Log ir to Meyer with your user name and password, thee tap + or the upper fight comer Enter the information required on the Interface of Add Device, then tap OK bo add the devise.
Denise Name: Set a name for your DVR stern Saris Number: Get the serial number from Main Menu > System » Info. = Version or the GR ede from Startup Wizard. Username (Default Is admin Enter admin you did not change it in the Startup Wizard, Password {Default is null: Enter the password of DVR you set Tn the Startup Wizard. If its changed, please enter the new password. After successfully adding the DVR, it will be listed on tha interface of Device List.
Full Screen Channel Telecommute Snapshot Microphone anu Record video Playback image Quality PTZ: not supported Cruise Cork: not supported byte camera byte camera Number of Split Screens “Tap 353 to enter the detailed settings of the channel. You can set the record plan, alarms, and more here. oon to capture a picture and save to your mobile device. to stars retarding; sap it again to and and save the video ta your mails device, ta display the lve video from ane channel on the screen.
in he interface of va video ta play the video recorded in the Hard Disk Drive of the DVR system, Tap on the top right of Remote Video, It wil switch to Salt Serene Option Add Chanel Chanson speed Telecommute Snapshot Pause Record Timeline Minute Display the Helen by Hour * 141 stands for one screen displayed on the interface, while 7 indicates 4 screens, “Tap +} to add another channel. * Slide leftward or rightward on the timeline to check tha videos recorded by time.
Tap £38 an the interface of Live Ides, then tap Record Download to back up the videos ta your table device. IMPORTANT: Please turn off antivirus protection and firewalls in Windows Security.
ssn admin Lama assn rnd: pan Lam oe) Step: Click OK to add the DVR system automatically.
Steps: The D¥R you added will be cited on the interface of Device Manager after 10s searching, invalid Password: The VMS Client cannot load the password of the DVR system automatically, you need to modify ft by clicking Connected: The DVR system is ready to use. offline: Please check if the DVR system ard PC are connected to the same router. Timeout: Network ray be disconnected, please click 38 to refresh.
Option 2: Add the DVR system manually Step 1: Click Manila Add at the lower left timer on the interface of Device Manager. Sep Change the Lenin Type from IP Audible and enter the required information on the Interface of Add Device.
Device Name: Set name for the DVR. c Loud ID: Also called Serial Number, You ean get it farm Startup Wizard or by accessing Main Menu > Info, > Version. Password: Enter the password you set for the DVR system. Please click Home > Live View to view the live videos farm all channels. *Click to select a screen (the selected one will be marked with the white border), then double click to select one channel under the list of Themistocles, the live video from the channel will be displayed on the selected screen.
You ean go to Horne > OPERATION » Record Settings to set the disk in which the video will be saved for VMS Client. Please gn to Coma > ADVANCE > Record Plan to sat th defiled railcard plan. Hates: You need always (og in to VMS Client for saving the videos nto the Disk of your PC. Select I to save the videos in case of insufficient disk space and abnormal situation of your PC.
Stay on the interface of Video Playback, click 8 to download the selected video, while click {§ to download the diva fragment by time period in this video file, The file you downloaded will be seed to the default path on the PC, You can gi to Home = SETTINGS » Systems Con fig to modify the path. The format of the fle you downloaded 1s H264 and the fle Is encrypted. it only can be played by the exclusive media player and you can get it from Mites: fun QL.
* This DVI system is set to perform the a moated maintenance task at 01,00 suety Tuesday by default, thus it will reboot automatically. You can go to ain Menu > Advanced > Auto Maintain ta modify the reboot time, tha usual persists, please contact Relativist Support for Mara help. 2. How should forget my password? Please click Forgot Password when logging into the DVR system. * The system will ask you the security questions you stein the Startup Wizard, please stern the right answer to reset your password.
* you Just hive a camera in hand, please follow the steps below: For the camera with the format of TW/OW/SVIZCVES, tight click on the screen, select VISAYANS to set the Signal of the channel to Auto or the corresponding format of your camera, thee connect the camera with the DVR system, Fran 7 camera, please go to Man Peru = System = Digital = Channel Type to check the box of the fourth lire, then go back to the main screen ard move the cursor ta the Chanel you'd like to connect the camera, Click + in the c
138, Why doss the App remind ma of "Mat mum Ides Link"? * For remote viewing, such as from Asp or PC Client, you ean ably simultaneously ares the live videos from channels at most. Please close the unnecessary channel, QB.
Q13, Why does the ve video from channels loop tn pop up on ie full screen? * Please go to Mali bent » System > Tour to verily if you enabled the setting of Tour, of 6 to Main Menu > Alarm sn check whether you enabled Tour function of caring kind of alarm, You can disable it to exit this mode. Q14. What can | do If the color of the live video Is abnormal? * Please right dick on the mai screen, then select Color Setting to modify the color setting of the caners, Control to med the color setting. 15.