User's Manual

INSTRUCTIONS FOR RADIO CONTRO L OPERATOR SINGLE ENT RY TRANSMITTER
MODEL NO.:X219-1
Read the following instructions thoroughly before using transmitter.
This transmitter must be adjusted so that the coding switches match the coding switches on
your present operating transmitter or receiver.
1.Remove the transmitter cover
a Unscrew the screws(Figure A).
b Remove the front cover from the transmitter(Figure B).
c In order to facilitate the replacement of the battery.
FIGURE A FIGURE B
User manual
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference,and (2) this device must accept
any interference received,including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT.
SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
2.The transmitter is rolling code encoding and transmitting, it will automatically and receiver
code matching.
If the receiver successfully decoded, the receiver will normally work.
User can click the push button,A signal tramsit out.