22-in Smokeless Fire Pit OWNER'S MANUAL AND ASSEMBLY INSTRUCTIONS Model Number: SRFP12119R KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. ! WARNING ADULT ASSEMBLY REQUIRED. Keep screws, nuts and parts out of reach of children. CUSTOMER SERVICE: 1-888-909-3888 Monday - Friday, 7:30 a.m. – 4:30 p.m.
TABLE OF CONTENTS WARNINGS 1-2 PARTS AND HARDWARE 3 ASSEMBLY INSTRUCTIONS 4-7 PRODUCT USE OR INSTRUCTIONS 8 CARE AND MAINTENANCE 9 WARRANTY INFORMATION 10 BEFORE ASSEMBLY: • Verify all the parts are included BEFORE you begin assembly. Refer to the Parts Lists section. For your convenience, some parts might be pre-assembled or attached to fire pit components. • If any parts are missing, do not attempt to assemble the fire pit. Call Customer Service to request replacement parts.
WARNINGS ! WARNING For Outdoor Use Only (outside any enclosure) ! WARNING 1. Improper installation, adjustment, alteration, service, or maintenance may result in property damage, injury or death. 2. Read the installation, operation, maintenance instructions thoroughly before installing or servicing this equipment. 3. Failure to follow these instructions could result in a fire or explosion, which could cause property damage, personal injury or death. Save these instructions for future reference.
WARNINGS 14. DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. 15. DO NOT store or use an LP gas cylinder within 10 feet (3.05 m) of this fire pit while it is in operation. 16. DO NOT use this fire pit near automobiles, trucks, vans or recreational vehicles. 17. DO NOT use in an explosive atmosphere. Keep outdoor area clean and free from combustible materials, gasoline and other flammable liquids. 18.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
ASSEMBLY INSTRUCTIONS NOTE: Assemble the fire pit on a non-abrasive, level surface. If missing parts please contact customer service. Step 1 Attach the leg supports (G) to the legs (C) with (12) M4 x 10 screws (BB) as illustrated. C BB Hardware Used BB M4 x 10 Screw G x12 Step 2 Attach the heat insulated plate (B) to the leg supports (G) with (6) M6 stepped screws (CC) as illustrated.
ASSEMBLY INSTRUCTIONS Step 3 Attach the inner tube (D) to the fire bowl (A) with (6) M4 x 10 screws (BB) as illustrated. Then place the bottom of fire bowl upward. Note: The inner tube installation is optional. This step can be ignored, see instructions on page 8. A D BB Hardware Used BB M4 x 10 Screw x6 Step 4 Attach the leg assembly to the bottom of fire bowl (A) with (6) M6 x 10 screws (AA) as illustrated.
ASSEMBLY INSTRUCTIONS Step 5 Attach the baffles (E) to the bottom of fire bowl (A) with (9) M4 x 10 screws (BB) as illustrated. BB E A Hardware Used BB M4 x 10 Screw x9 Step 6 Place the ash tray (F) onto the heat insulated plate (B) as illustrated.
ASSEMBLY INSTRUCTIONS Step 7 Place the cooking grid (H) onto the firebowl as illustrated.
PRODUCT USE OR INSTRUCTIONS Lighting Using firewood 1. Make sure there is no ash in the bottom of fire bowl. 2. Start by placing dry kindling and small wood pieces in the fire bowl. 3. Use a match to light kindling or small wood pieces. 4. As the ember bed gets hotter, start adding in 1-3 pieces of wood. As those catch, add enough wood to fill the fire bowl.
CARE AND MAINTENANCE Inspecting This fire pit should be inspected on a regular basis to ensure product safety and longer product life. DO NOT attempt to inspect this fire pit until the fire is COMPLETELY out and cool to the touch. 1. Check components for any signs of damage or rust. 2. If damage to any component is detected, DO NOT operate until repairs are executed. Cleaning This fire pit should be cleaned on a regular basis to promote safer experiences and longer product life.
WARRANTY INFORMATION 1-YEAR LIMITED WARRANTY This appliance has been manufactured under the highest standards of quality and workmanship. Shinerich Industrial Ltd warrants, to the original consumer/purchaser, that all aspects of this product will be free of defects in material and workmanship for one (1) year from the date of purchase shown on the purchaser’s receipt. Please retain your sales receipt as proof of purchase might be required or requested.