e l i t e video doorbell Owner’s Manual
Introduction Table of Contents INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 CARE AND CLEANING. . . . . . . . . . . . . . . . . . . . . . . . . 11 FAQS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14 Thank You for Purchasing Notifi™ Elite Doorbell Welcome to Notifi by HeathZenith.
Introduction Specifications Power Requirements: 16 VAC/10 VA Transformer Video Quality: Resolution: Hi (Default) = 1280x720 (720p), Med = 640x360, Low = 320x180 Frame Rate: Adjustable up to 25 Fps Viewing Angle: 160° Maximum Recording Length: 2 minutes per recording Operating Temperature: -13 to +120°F (-25°C to +50C) NOTICE: Install the Notifi Elite doorbell in a covered location; away from direct sunlight, rain, and humidity.
Introduction Carton Inventory Microphone Notifi Elite Doorbell Camera Power Module Motion Sensor Speaker Push Button Spade Connectors (Connect to chime terminals) LED Indicator Ring Chime Wires (Connect to existing chime wires) All activities are monitored & recorded by video camera Window Cling Decal Screws (#6 x 3/4"), Wall Anchors, and Double-Sided Tape (for Power Module) Wire Quick Connect NOTICE Install the Notifi Elite doorbell in a covered location; away from direct sunlight, rain, and humid
Setup 1 Install the Notifi Elite Doorbell NOTICE Before connecting the Notifi Elite doorbell to a multi-tune electronic chime (see illustration on bottom of page 6), set the chime to the desired tune. See chime manual for tune selection instructions. 1. Remove the existing wired push button. 2. Remove the backplate of the Notifi Elite doorbell by pushing in tab on the bottom with a small, flat-head screwdriver. 3.
Setup 2 Install the Power Module The Notifi Elite doorbell requires a power module to be installed for each Notifi Elite doorbell connected to your chime. 1. Remove the chime cover from the existing chime. 2. Label the chime wires according to the terminals they are attached to (TRANS, FRONT, REAR). 3. Remove the transformer (TRANS) wire and connect it to one of the wires on the power module using the wire quick connect (included).
Setup 3 Download the Notifi App iOS Devices Go to the App StoreSM and search for the “Notifi Connected Products” app and download. Android Devices Go to the Google Play™ store and search for the “Notifi Connected Products” app and download. 4 Setup the Notifi App and Camera IMPORTANT: Your home password will be required during this process. 1. Allow the Notifi Elite doorbell 1 minute to fully boot-up. 2. On your mobile device, go to Settings > Wi-Fi.
How to Use Systems Tab The Systems tab is the “home screen” for all of your Notifi systems. From here you can access the following choices: • Notifi systems – The Systems tab lists all Notifi systems available. Tap on the desired Notifi system to view a live camera view. • mute – Selecting the “Mute” button will immediately mute your chime. Muting the chime from this location will override any scheduled mute settings. Select “Unmute” to return to the scheduled mute settings.
How to Use Events An event is created when the push button is pressed. Two pictures from the Notifi camera will be stored to the cloud for 24 hours. With the Premium Service, when the push button is pressed two pictures and a video from the Notifi camera will be stored to the cloud for 30 days. Also with Premium Service, two pictures and a video event will be stored for 30 days with every motion trigger. Events tab. Then tap the name of the Notifi system you would like to view events for.
How to Use Notification Settings > Feature Settings > Notifications The notifications settings screen allows you to enable, schedule, and disable push notifications and email notifications. IMPORTANT: With any setting changes make sure you press the Save button your changes. Save in the upper right corner if you want to keep Mute Settings > Feature Settings > Mute Settings The Notifi system allows you to mute your chime from within the Notifi app.
How to Use System Name/Photo Icon > Advanced Settings > System Name/Photo The Notifi systems on your account can be renamed at any time. A photo can be added to represent each Notifi system on your mobile device. The photo will be placed inside the blue circle icon next to the selected Notifi system. NOTE: The photo is stored on the Notifi server and will appear on any device logged into or sharing this account. IMPORTANT: With any setting changes make sure you press the Save button your changes.
Care and Cleaning Notifi Elite Camera Lens To clean the Notifi camera lens, use a dry, microfiber cloth only. Do not spray the camera with a hose or power washer. Notifi Elite Push Button Use a dry cloth to clean the chime and push button. Do not use any fluids on the chime or push button. FAQs WHY CAN I NOT VIEW THE LIVE-STREAM VIDEO? • Verify that the Notifi Elite doorbell is ONLINE.
FAQs WHY WON’T THE NOTIFI SYSTEM CONNECT TO MY WIRELESS NETWORK (HOME ROUTER)? To resolve issues with the Notifi Elite doorbell not connecting to the home router: • Using your mobile device, test the Wi-Fi signal at the location of the Notifi doorbell (entryway). If the Wi-Fi signal at the entryway is low, move the router closer to the entryway or get a Wi-Fi extender. • Verify you are connecting to the correct wireless network and inputting the correct network password.
FAQs HOW DO I CONNECT MY NOTIFI ELITE TO MY NEW ROUTER? There are two possible options for reconnecting the Notifi Elite doorbell to your new router: • OPTION 1 – Press and hold the push button on the Notifi Elite for 30 seconds. This will place the Notifi Elite into a discoverable state. Follow step 4 under Setup to connect the Notifi Elite to the new router. • OPTION 2 – Remove the transformer (TRANS) wire from the chime. Wait 2 minutes. Reconnect the wire.
1 Year Limited Warranty This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province. For a period of one year from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, batteries, and other expendable items are not covered by this warranty.