Item #1001318516 1001311061 Model # 5985 Model #DFI-5985-BZ Serial # DFI-5985-BZ, DFI-5985-WH DFI-5985-WH USE AND CARE GUIDE MOTION SECURITY LIGHT Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this motion security light.
Table of Contents Tools Required .......................................3 Hardware Included.................................4 Package Contents ..................................4 Installation ................................................5 Operation...................................................7 Care and Cleaning ..................................11 Troubleshooting ......................................11 Table of Contents ......................................2 Safety Information ..................
Pre-Installation PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture. Estimated installation time: 30 minutes SPECIFICATIONS Range Up to 70 ft. (21.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size.
Installation 1 Determining the mounting location NOTE: The light fixture should be mounted approximately 8 ft. (2.4 m) above the ground. If the light fixture is mounted higher than recommended, aiming the sensor down will reduce the coverage area. Ƒ Ƒ Ƒ 2 Wall Mount Determine the mounting location – wall or eave mount. Position the lamp heads (A) in the general direction of the desired light coverage. If needed, rotate the motion sensor (C) so the text faces upward.
Installation (continued) 4 Ƒ Ƒ Installing the 1-2- asy Connect™ Ƒ Ƒ Route the junction box wires through the large hole in the 1-2- asy Connect™ (D). Place the 1-2- asy Connect™ (D) against the junction box. Ƒ When mounting to a wall, the “UP” arrow must point upward. Ƒ Ƒ 5 When mounting to an eave, the “UP” arrow must point toward the building.
Installation (continued) 7 Ƒ Caulking around the light fixture Caulk around the 1-2- asy Connect™ (D) and mounting surface with silicone sealant (not included). D Operation 1 2 Adjusting the lamp heads Ƒ WARNING: Risk of fire. Keep the lamp heads at least 2 in. (51 mm) from combustible materials. Ƒ Rotate the motion sensor (C) so the text faces upward. NOTICE: All clearances must be maintained. See Safety Information on page 2.
Operation (continued) 3 Ƒ Ƒ Ƒ Downloading the Defiant® mobile app 4 Ƒ Ƒ Download the Defiant® mobile app from the Apple® or Android® app store (search for “Defiant”). Turn on the Bluetooth® in the device settings. Open the Defiant app and touch “Begin”. Pairing the light to the mobile app Ensure the power to the light is turned ON. Touch “Scan for lights” to search for existing lights. NOTE: During the scanning process, the app will locate ALL Bluetooth® lights in the area.
Operation (continued) 7 Adjusting the light settings The “ON-TIME” option determines the amount of time the light will stay on “Full ON Brightness Level” after all motion has stopped. After the light is paired to the mobile app, the yellow circle around the light will change to green. Ƒ Ƒ Ƒ The “Full ON Brightness Level” option determines the light brightness level after the light has been turned on by motion. Touch the light icon. Touch “Settings” to adjust the light controls.
Operation (continued) 9 Ƒ Ƒ Ƒ Ƒ Adjusting the motion sensor detection zone Ƒ Perform a “walk test”: walk in an arc across the front of the motion sensor (C). Watch the light. The light will come on and the red LED will flash indicating motion has been detected. Stop, wait for the light to turn off, and then begin walking again. Continue this process until the detection zone has been established.
Operation (continued) 12 Resetting the light fixture to factory settings 68% 7:15 AM Porch ATT 9:25 PM Back Porch 100% Settings Settings If the password is forgotten, the light fixture may be reset to the original factory settings. Rename Light Rename Light Restore Factory Defaults Restore Factory Defaults Ƒ Ƒ Ƒ Touch the light icon. Touch “Restore Factory Defaults”. Follow the on-screen instructions to restore all light settings back to the original factory settings.
Troubleshooting (continued) Problem Possible Cause Solution The light comes on for no apparent reason. Ƒ The motion sensor may be sensing small animals or automobile traffic. Ƒ Decrease the “Sensitivity” setting or reposition the motion sensor. Ƒ The “Sensitivity” setting is set too high. Ƒ Decrease the “Sensitivity” setting. Ƒ The “DUALBRITE” setting is in the 3 hour, 6 hour, or dusk-to-dawn setting. Ƒ The light fixture is operating normally under these circumstances.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use. The Bluetooth® word mark and logos are registered trademaks owned by Bluetooth® SIG, Inc. and any use of such marks by HeathCo LLC is under license. Other trademarks and trade names are those of their respective owners.
Articulo #1001318516 1001311061 Modelo #DFI-5985-BZ Model # 5985 DFI-5985-WH Serial # DFI-5985-BZ, DFI-5985-WH GUÍA PARA EL USO Y CUIDADO LUZ DE SEGURIDAD POR MOVIMIENTO ¿Tiene preguntas, problemas o piezas faltantes? Antes de devolverlo a la tienda, llame a Servicio al Cliente de Defiant de 08 a.m.-7 p.m., EST, Lunes - Viernes, 09 a.m.-6 p.m., EST, sábado. 1-866-308-3976 HOMEDEPOT.
Contenido Herramientas Requeridas ....................17 Ferretería Incluida................................18 Contenido del Paquete .........................18 Instalación ..............................................19 Operación ................................................21 Cuidado y limpieza .................................25 Análisis de averías .................................25 Contenido ................................................16 Información de seguridad ......................
Antes de la instalación PLANIFICACIÓN DE LA INSTALACIÓN Antes de instalar el aparato de luz, esté seguro que estén todas las piezas. Compare las piezas con la Ferretería incluida y las secciones de Contenidos del paquete. Si cualquier pieza falta o está dañada, no intente ensamblar, instalar ni operar este aparato de luz.
Antes de la instalación (continuación) FERRETERÍA INCLUIDA NOTA: La ferretería se muestra en su tamaño real AA BB CC DD EE FRONT FF GG HH Pieza Descripción Cantidad AA Tapón de caucho 1 BB Tornillo del soporte de montaje 2 CC Tornillo del soporte de montaje 2 DD Tornillo del soporte de montaje 2 EE Tornillo grande de montaje (pre-instalado) 1 FF Tornillo pequeño de montaje 1 GG Soporte de montaje (no está a escala) 1 HH Mini-destornillador 1 CONTENIDO DEL PAQUETE A B D C
Instalación 1 Determinación del sitio de montaje NOTA: Esta lámpara debe ser instalada aproximadamente a 8 pies (2,4 m) por encima del suelo. Si se la instala a una altura más alta de la recomendada, se reducirá la zona de cobertura si apunta el detector hacia abajo. Ƒ Ƒ Ƒ 2 Montaje en pared Determine el sitio de montaje – pared o alero. Coloque los cabezales de la lámpara (A) en la dirección general de la cobertura de luz deseada.
Instalación (continuación) 4 Ƒ Ƒ Ƒ Ƒ Instalación del 1-2- asy Connect™ 5 Ƒ Pase los cables de la caja de conexiones por el orificio grande en la 1-2- asy Connect™ (D). Coloque el 1-2- asy Connect™ (D) contra la caja de conexiones. Ƒ Cuando la instale sobre una pared, la flecha “UP” (Hacia Arriba) debe apuntar hacia arriba. Ƒ Cuando la instale sobre un alero, la flecha “UP” (Hacia Arriba) debe apuntar hacia el edificio.
Instalación (continuación) 7 Ƒ Calafatee alrededor del aparato de luz Calafatee alrededor del 1-2- asy Connect™ (D) y de la superficie de montaje con un sellador de silicona contra la intemperie (no incluido). D Operación 1 Ajuste de los cabezales de la lámpara 2 Ƒ ADVERTENCIA: Riesgo de incendio. Mantenga los cabezales de la lámpara por lo menos a 2 pulgadas (51 mm) de materiales combustibles. Ƒ Gire el detector de movimiento (C) de modo que el texto quede hacia arriba.
Operación (continuación) 1 móvil de Defiant Descargando la aplicación ® Ƒ Ƒ Ƒ 2 Ƒ Descargue la aplicación móvil Defiant® de la tienda de aplicaciones de Apple® o de Android® (busque “Defiant”). Active el Bluetooth® en los ajustes del aparato. Abra la aplicación Defiant y toque “Comenzar” (“Begin”). Ƒ Emparejando la luz a la aplicación móvil Asegúrese que la alimentación a la luz esté PRENDIDA (ON). Toque “Escanear luces” para buscar las luces existentes.
Operación (continuación) 5 Ajuste de la configuración de la luz La opción “ON-TIME” (“DURACIÓN”) determina la cantidad de tiempo que la luz permanecerá encendida “a un nivel de brillo total”, después que todo movimiento se ha detenido. Después que la luz esté emparejada con la aplicación móvil, el círculo amarillo alrededor de la luz se cambiará a verde. Ƒ Ƒ Ƒ La opción “Nivel de brillo total” determina el nivel de brillo de la luz después que la luz se ha encendido por un movimiento.
Operación (continuación) 7 Ƒ Ƒ Ƒ Ƒ 8 Regulación de la zona de detección del detector de movimiento Ƒ Haga una “prueba caminando”: camine transversalmente a la parte frontal del detector de movimiento (C) siguiendo la trayectoria de un arco. Observe la luz. La luz se encenderá y el LED rojo destellará indicando que se ha detectado movimiento. Deténgase, espere que la luz se apague, y luego empiece a caminar de nuevo. Continúe este proceso hasta que la zona de detección haya sido establecida.
Operación (continuación) 10 Restablecimiento de la lámpara a los ajustes de fábrica 68% 7:15 AM Porch ATT 9:25 PM Back Porch 100% Settings Settings Rename Light Rename Light Si se olvida la contraseña, se puede restablecer la lámpara a los ajustes originales de fábrica. Ƒ Ƒ Ƒ Restore Factory Defaults Restore Factory Defaults Toque el icono de la luz. Toque “Restaurar valores predeterminados en fábrica”.
Análisis de averías (continuación) Problema Causa Probable Solución La luz se enciende sin razón aparente. Ƒ El detector de movimiento puede estar detectando pequeños animales o tráfico automotor. Ƒ Reduzca el ajuste de “Sensibilidad” o cambie la posición del detector de movimiento. Ƒ El ajuste “Sensibilidad” es demasiado alto. Ƒ Reduzca el ajuste de “Sensibilidad”. Ƒ El ajuste “DUALBRITE” está programado para 3 horas, 6 horas, o del anochecer hasta el amanecer.
Análisis de averías (continuación) Problema Causa Probable Solución La aplicación Defiant no encuentra la lámpara. Ƒ El Bluetooth® no está encendido. Ƒ La aplicación Defiant no enciende la lámpara. Ƒ La alimentación a la luz está apagada. Ƒ Ƒ El Bluetooth® no está encendido. Ƒ “ACTIVE” (“ON”) el Bluetooth® en la configuración del aparato. Encienda la alimentación a la luz. “ACTIVE” (“ON”) el Bluetooth® en la configuración del aparato.
¿Tiene preguntas, problemas o piezas faltantes? Antes de devolverlo a la tienda, llame a Servicio al Cliente de Defiant de 08 a.m.-7 p.m., EST, Lunes - Viernes, 09 a.m.-6 p.m., EST, sábado. 1-866-308-3976 HOMEDEPOT.COM Guarde este manual para uso futuro. La marca Bluetooth® y sus logotipos son marcas comerciales registradas propiedad de Bluetooth® SIG, Inc. y cualquier uso de dichas marcas por HeathCo LLC está hecho bajo licencia.