Healy Watch INSTRUCTIONS FOR USE Model No.
EN | Table of Contents 1. Introduction 4 2. General 4 2.1 Intended Use 4 2.2 Description 2.2.1 Hardware Description 2.2.2 Software Description 4 5 5 2.3 Attention 6 2.4 Safety Notes 3. Preparations for Use 3.1 Installation 3.1.1 Smartphone Requirements 3.1.2 Android Operating System 3.1.3 iOS Operating System 3.1.4 Hardware 3.1.5 Pairing via Bluetooth 3.1.6 Wearing the Healy Watch 4. Operation Instructions 4.1 Software Functions 5.
Healy Watch Instructions for Use 5.4 Maintenance 5.5 Troubleshooting 15 15 6. System Components 16 7. Technical Data 16 7.1 General 16 7.2 Electrical Parameters 7.2.1 Power Source Requirements 7.2.2 Healy Watch 7.2.3 FCC Statement 17 17 17 18 7.3 EC-Declaration of Conformity 19 7.4 Mechanical Parameters 20 7.5 Environmental Conditions 7.5.1 Operation and Storage 20 20 8. Disposal 20 9. Used Symbols and Icons 20 10.
1. Introduction Thank you for choosing the Healy Watch. Please read this manual carefully and pay special attention to the warnings and cautions. This manual is intended for the user. Intended users include adults at home. It aims to ensure safe handling and to enable users to become familiar with the device. 2. General 2.1 Intended Use Healy Watch is a tracker for wellbeing. 2.
2.2.1 Hardware Description Removable straps Wrist pads Full-screen touch display Sensor Sensor Sensor Built-In USB charger 2.2.2 Software Description The "Healy Watch App" is required for configuring and controlling the Healy Watch hardware.
2.3 Attention · Intentional misuse may impair the function of the device. · Carefully read the instructions before using the device. · This product is intended only for the purpose described in these inst ructions for use. · In this manual, the word DANGER warns of possible personal injury! · In this manual, the word WARNING warns of possible damage to objects. 2.4 Safety Notes Danger/Warning: · Do not immerse the device in liquids. · In the case of a defect please contact the manufacturer.
3. Preparations for Use 3.1 Installation Before putting the Healy Watch into operation, you need to prepare the hardware and install the "Healy Watch App". 3.1.1 Smartphone Requirements Bluetooth Bluetooth 4.2 or higher Operating system iOS1 version 9.0 or higher Android2 version 4.4 or higher 1 iOS is a registered trademark of the operating system for smartphones and devices manufactured by Apple Inc. 2 Android is a registered trademark of Google Inc.
3.1.4 Hardware · Unpack the Healy Watch and check for damage · Charge the batteries for 1.0 hours before first use Note: The battery cannot be removed by the user. 1 Gently pull the straps off.
2 Insert the built-in USB charger into a USB port for charging. 3 Remove device from the power supply once fully charged. 4 Push the straps back on.
3.1.5 Pairing via Bluetooth 1 Log into your Healy account. 2 Read and agree to terms and policies. 3 Set up account information: profile photo, name, gender etc. 4 Make sure the smartphone Bluetooth (BLE 4.2) and location service are turned on. 5 Go to「Settings → Pair Device」and select the Healy Watch for pairing. You can check the Healy Watch Bluetooth ID in「Function → Info」. 6 Pair the Healy Watch with your smartphone.
5 6 7 EN | 12
3.1.6 Wearing the Healy Watch For accurate heart rate* measurement, please wear the watch: 1 Tightly but comfortably. It should not move while running or exercising. 2 Keep it at least one finger width away from the carpal bones. * Not intended for diagnosis or therapy 4. Operation Instructions 1 Swipe - Swipe up and down on the touchscreen to scroll through widgets and menu options. 2 Tap - Tap the button to execute the function.
4 Wrist Gesture - Rotate or lift your wrist toward your body to turn the screen on. 4.1 Software Functions Watch Face – The Healy Watch updates the time and date automatically when you sync with a smartphone. Status – The total number of steps, calories, distance, active minutes and goal achievement in % that you have achieved in a day. Sleep – The watch automatically records your sleeping hours, heart rate*, and sleep quality while you’re wearing it.
Message – Check the 10 latest m essages from your calls, SMS text, WeChat, WhatsApp, Facebook and more. SOS – Long press for 2 seconds to send SOS messages with your location to your emergency contacts in SMS form. * Not intended for diagnosis or therapy 5. Cleaning, Disinfection and Maintenance 5.1 General Maintenance activities increase the lifespan and safety of the Healy Watch. Please read this section carefully. 5.2 Cleaning Switch off the Healy Watch before cleaning.
5.4 Maintenance There are no user serviceable parts inside. In the event of damage, please contact the manufacturer. The following maintenance activity is recommended and should be followed for safe operation. Frequency By whom Maintenance activity Prior to each use User Check the casing for damage. In case of damage contact the manufacturer or an a uthorized dealer 5.5 Troubleshooting Below you will find typical warnings or messages that are related to the app or hardware.
Event or message Cause Actions required No connection from the smartphone to the device Location service is disabled. Enable location service 6. System Components Reference number Description Quantity 0007 Healy Watch hardware device 1 108-1301 Screen protector 1 108-1302 Screen wipe 1 108-1303 Conductive gel 1 7. Technical Data 7.
7.2 Electrical Parameters 7.2.1 Power Source Requirements The Healy Watch can be connected to any power source with the following specifications: Supply voltage range 4.4 V – 5.5 V DC Output current Max. 2500 mA Frequency DC Socket type USB-Type A Power type High powered 500 mA or higher Insulation type Double or reinforced insulation 7.2.2 Healy Watch Input voltage See 7.2.
7.2.3 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ-ing interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
7.3 EC-Declaration of Conformity This is an electrical device for application on humans. Type: Healy Watch Year of manufacture: 09-2019 – 12-2019 The product is designed and manufactured in accordance with the following directives: Low Voltage Directive 2014/35/EU ROHS - Directive 2011/65/EU; REACH 1907/2006/EC under the sole responsibility of: Company: Healy GmbH |Schloss Kränzlin| Darritzer Str.
7.4 Mechanical Parameters Dimensions 11.6 x 2.2 x 12.4 cm Weight 30 g Strap TPU black Input socket USB 7.5 Environmental Conditions 7.5.1 Operation and Storage Temperature Range 5°C to 40°C / 41°F to 104°F Relative humidity 15 % to 93 % Atmospheric pressure 700 hPa to 1060 hPa 8. Disposal The expected service life is 5 years. Ask your local authority for recycling advice. 9.
Watch Face Status Sleep Work Out Function Breath Message SOS Bluetooth Recycling symbol In conformity with European legislation Hardware reference n umber REF 0006 Symbol for Bluetooth wireless connection Electronic waste – do not d ispose. Recycle acc.
10. Revision Status Revision: 1 Date: 23th November 2019 Remark: Second edition Healy GmbH Schloss Kränzlin, Darritzer Str.
EN | 24
Healy GmbH | Schloss Kränzlin | Darritzer Str. 6 16818 Kränzlin – Germany T. +49 30 54905949-1 www.healyworld.net | info@healy.