Instruction Manual Personal Sound Amplification Products Model No.
Table of Contents Introduction……….…………………………………………………………………………. 03 Medical Disclaimer.………………………………………….……………………………. 03 Safety Precautions………………………………………………………………………… 04 Getting Started………………………………………………………………………………. 05 Device Overview..…………………………………………………………………………. 06 Features…………………………….……………………………………………….…………. 07 Charging the battery for Receiver..……………………………….…………….. 08 Charging the battery for Earphone……………………………….…………….. 09 Placing the earphone on your ear.……………..………………………………….
Introduction Thank you for purchasing HL202. This Bluetooth Personal Sound Amplification Product offers tremendous flexibility and customization in terms of fit and sound settings, allowing you to hear better in circumstances like business meetings and family gatherings. Please read this manual carefully in order to wholly benefit from the use of your hearing devices. With proper care, maintenance, and usage, your hearing devices will aid you in better communication for many years.
Safety Precautions Please read this manual carefully to benefit from all the features of your new hearing system Do not drop the device. Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc. for cleaning. Do not expose directly to flammables. Do not place or keep the device near flammables. Keep the devices away from excessive humidity and dust. Keep the devices away from fire or lighter or stove with fire.
Getting Started Your HL202 Bluetooth Personal Sound Amplification Product includes the following parts: • • • • • • • • • • The Receiver A set of earphone with the medium ear tips Receiver power bank AC/DC adapter Two rechargeable batteries of earphone Earphone batteries charging dock Micro-USB Cable x1 Two set of ear tips (Large & small) User manual A storage pouch Receiver Power Bank AC/DC adapter Earphone Receiver charging Dock Micro-USB Cable x1 Earphone batteries Ear tips (small size) 5 Ear t
Device Overview ■ Receiver overview Clamp Low battery LED MIC hole Left volume Right volume Volume up key Main key Sound mode Right key/sound mode select 1 → Mode 1 2 → Mode 2 Left key/sound mode select 3 → Mode 3 4 → Mode 4 Volume down key ■ The earphone overview Left earphone_________________________________________ Ear hook Ear tip Power key Battery (Answer/End a call) (Play/Pause the music when single 3C earphone using with smart phone without receiver) 6
Right earphone_____________________________________ Ear hook Ear tip Power key (Answer/End a call) Battery (Play/Pause the music when single 3C earphone using with smart phone without receiver) Features Personal Sound Amplification Product This device is equipped with Personal Sound Amplification Product (PSAP in short) and features are as below: Noise Reduction High and Low frequency enhance The receiver is designed for subtract noise and echo suppression to make hearing impairment person liste
Charging the batteries for Receiver HL202 is built-in rechargeable lithium battery; users can charge the battery by using charging dock. Please use only a compatible AC/DC adapter with required voltage and current as indicated in this manual.
Charging the batteries for Earphone ◆ Charging batteries of earphone Before using the earphone for the first time, you need to charge it with the micro-USB charging dock. When the battery is running low and requires recharging, the indicator light will change from blue to red blinking regularly, and it will emit a warning sound. 1. Remove the battery from the earphone. 2. Put the battery in the charging dock, the battery is fully charged approximately 2 hours.
Learning to use Important Notice before Wearing In sleep, pressure on the ear may damage personal sound amplification, please take off the personal sound amplification before sleeping. Make the external ear clean before wearing. To avoid unclear sound, keep the ear free from obstructions or excess earwax. Please wearing personal sound amplification one hour a day at first, and increase the time gradually until feel comfortable when continuously wearing 6 to 8 hours.
Placing the earphone on your ear 1. Place the battery behind the ear, hanging the battery wire over the ear. 2. If the eyeglasses user, position the battery between the earpiece of the glasses and the ear. Be aware that removing or adjusting the glasses may create a distracting noise in product HL202. 3. Insert the ear tip straight into your ear gently, wiggling slightly to ensure a good fit. The ideal fit is snug, but not tight.
Turn the device ON and OFF Note: In succession, Must turn on both earphones power first. Then turn on Receiver to connect both earphones. ◆ Turn the Earphone ON/OFF To turn on the earphone: Press and hold power ( ) key for approx.1 second, the red &blue lights will be lit and then flash for twice quickly. The earphone will make alert sound as beep. If the earphone is connected to the receiver successfully, the blue light starts to flash regularly.
Booting process and indicators ◆ Make sure all devices are power on. The earphones and receiver connect successfully need all devices power on. If one of both earphones will not be connected and keeping booting until connecting successful in 5 minutes. Power on/off can be referred on” Turn your device ON and OFF” page. 1. Booting process indicator LEDs has indicate receiver connecting status that follows welcome booting indicator after pressing press “main key”. The indicator LEDs are as following. 2.
Note: When one of both earphones is disconnection, the receiver will enter re-connected mode automatically. User needs to keep both earphones are in power on status and stay in 10 meters for RF available receiving range. If the receiver still is doing reconnecting, please check earphones power is off or not. Make sure both earphones are all power on with blue indicator LED flashing.
Example: present sound mode is mode 1(default mode) after press locked key. 5. If the receiver does not be unlocked touch key over 1 minute, the receiver will automatically enter the power saving status. The present sound mode indicator will be flashed every 2 seconds. If there is any operation, presses the “mode” key to wake up and unlock. Volume Control ◆ Control the both ears volume: Press the “ / ” key to adjust the volume. There are 8 levels of volume can be adjustment.
Keep pressing " " key to increase the volume, the maximum level is 8. The volume adjusts from level 1 to level 2 as example. When pressing the " " key, the indicator LEDs will be shown quickly for entering volume adjustment mode as following. (Note: When press “-” key from Sound Mode, the LED indicator will show decreasing sweep LED indicator.) Enter Volume setup mode: decreasing sweep LED indicator. The present volume is level 1 as default.
Press “ Press “ ” key for left earphone indicator LEDs ” key for right earphone indicator LEDs Note: Unlocked and locked touch key as reference “Unlock and Lock touch key” page. 2. Press the " "or " "key to adjust the single ear volume. There are 8 levels of volume can be adjustment. From default volume level 1 to 2 for LEFT single earphone adjustment when pressing " " key. From volume level 2 to 1 for LEFT single earphone adjustment when pressing " 17 " key.
From default volume level 1 to 2 for RIGHT single earphone adjustment when pressing " " key. From volume level 2 to 1 for RIGHT single earphone adjustment when pressing " " key. *Note! 1. If you first time to turn on the HL202, suggesting adjust volume to the minimum to prevent the excessively loud sounds. 2. The device has key lock function. Any operation needs to be unlocked key first.
Indicate enter Mode mode. 3. Press “ Default mode is mode 1 ” or “ ” key to select Mode 1~4. Four Modes indicator LEDs from Mode 1~4. How to reconnect with all devices When battery is low or battery falls off or is too far away 10 meters for RF link loss, the receiver will detect earphones status and will do re-connected automatically.
Single earphone can be 3C earphone with smart phone without receiver. User can play music on single earphone and answers the call. To pair the earphone with smart phone: 1. Make sure the earphone is turned off. 2. Keep the earphone and smart phone closely as possible to each other for pairing process. 3. Turn on the Bluetooth function of the smart phone. For instructions, please see the phone User guide. 4. Press and hold power ( ) key on earphone for approx.3 seconds to enter pairing mode, i.e.
How to answer a call When phone call is coming, the beep alert will be sounded. Pick up the phone by smart phone or press earphone power key. No volume level and No sound Mode adjustment function when receiver detects phone call coming or answering the call. Until hang off the call, the receiver will become normal. ◆ If the earphone has paired already and connected with smart phone. When phone call is coming, the “beep” alert sound will be played on earphone which connects to smart phone.
Troubleshooting Please refer to the table below to troubleshoot any problems you may encounter when using the personal sound amplification. Problems Sound is weak Possible Causes Solutions Low battery power or batteries has run out Charge the battery Volume too low Adjust the volume Any visible dirt on microphone or receiver Please use dry cloth to slightly wipe the dirt Adjust the volume level or go away noise environment or clean Mic hole on receiver.
pocket extruding Earphone gets too closer near receiver Receiver is keeping doing booting indicator LEDs flashing Personal sound amplification does not connect successfully Red light flashing Receiver or earphone(beep warning) is low battery Get earphone away from receiver with reasonable distance(over 10cm). Please make all earphones are power on to let receiver do connection in 5 minutes.
Cleaning instructions for your devices • Clean the hearing devices with a soft, dry tissue, as necessary. • Ear wax may affect sound quality. Listen for any changes in how the hearing device is performing. If ear wax has built up, it can be easily removed with cleaning cloth or a soft tissue. Do not use water, alcohol, benzene or any other liquid or household cleaning agent/liquid to clean your devices, it may cause damage.
Specifications Product Name Personal Sound Amplification Model Number HL202 Measurement Method Air-Conduction Display mode Receiver: LED, Green 2x8, Red x1 Earphone: LED, Blue x1, Red x1 Dimension Size（L x W x H） Unit Weight(Without Earphone) Receiver(included battery): 50x40*24 mm(approx. 2.17 x 1.58 x 0.094 inch) Earphone (included battery): 43.5x67*23.5 mm (approx.1.61x1.58x0.53 inch) Receiver charging dock: 39.5x39x11 mm(approx. 1.56x1.54x0.43 inch) Power bank dock: 70*61.70*28.30mm(approx. 2.
Receiver Charging Dock: Accessory Spec. Earphone Power bank Dock Charging cable Input: Output: Connect type: Working temperature: DC 5V-1A DC 5V-150mA Micro USB 0℃~45℃ Storage temperature: -20℃~45℃ Charging spend: 2.6 hours Input: Output: Connect type: Working temperature: DC 5V-1A DC5V-60mA Micro USB 0℃~45℃ Storage temperature: -20℃~45℃ Charging spend: 2.0 hours Micro USB 20cm/2pin (charging only) *The contents and specifications in this manual are subject to change for improvement without notice.
FCC Information This device (HL202[BT Personal Sound Amplification Product]) complies with Part 15 of the FCC Rules. NOTE: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.
Warranty Card Personal Sound Amplification Products Warranty Card Name Phone: Birthday (year/month/date) Address Product Name: Date of Purchase: (year/month/date) ◎ Within 1 year since the purchasing date: (Distributor Stamp) Thank you for purchasing our product! Our products must undergo the careful check before out of the factory. Please feel free to use. During the warranty period, HEALTH & LIFE CO., LTD. is responsible the product defects under normal use for free maintenance.
