Table of Contents. J Helpful 2 Accessory Parts List & Quick Guide. Caution Warnings. J [LET —— Specifications... ] Pleads dispose of loose, round plastic pieces. These ars used to separate the shelves for shipping purposes. 1. Two adults are recommended for ease of assembly. Use care when handling. 2. Da not allow children to climb or play in or around the shelves. 3, Assembly recommended on a soft surface, such as carpet, to avoid scratching flooring finish. 4.
Step 1: Mount the Insert nto bottom of post { Hammer may apply}, then screw the levelers into insert adjust the foot levelers in or out at the boom of the posts to attain proper leveling. (Ses Diagram (8) (d CCC = Step: Post Assembly I. The top post section has a plastic end cap on one end and the bottom post has a foot leveler attached. Threaded post joiners are per-installed for your convenience. Screw the posts {1 long & short) tightly together. (Ses Diagram #1) ~> 1D Step 3: Bottom Shelf Assembly i.
HARDWARE CONTENTS Washer Plastic Anchor Screw Qty. 2 Qty. 2 Qty. 2 To prevent the unit from tipping over, secure ditto a wall in the following manner: Drill a hole in the wall using a 1/4 in. drill bit (not included). Insert the plastic anchor (BB) info the hole. Insert the screw (CC) through the washer (AA) then through the back of the top shelf wire and info the plastic anchor (BB) as shown. Be sure unit is secure and doesn't wobble or tip over. WWW.HOMEDEPQT.COM Retain this manual for future use.