H4 3-Axis Handheld Gimbal 3-Axis Handheld Gimbal, the electric stabilizer for taking photo or taking video.
CONTENTS 一、Packing List…………………………………………… 02 二、Introduction…………………………………………… 02 三、Product Display……………………………………… 03 四、Balance Adjustment………………………………… 06 五、Product Usage……………………………………… 06 六、Specification………………………………………… 08 Warning and disclaimer： Any unauthorized use of any user will be prohibited and the user will purchase and use the product take responsibility for all your actions.
一、Packing List Item Product Name Q’ty 1 Handheld Gimbal X1 2 USB Cable X1 3 User Manual X1 二、Introduction 6 Features 1 Quick Adjustable By Hand 2 Automatic adjustment of up / down / left / right 3 Gestures vertical shooting 4 One-Key Back originatposition 5 Scene mode: Locked mode / Half-follow mode / Full-follow mode 6 USB Charging(Explosion-proof battery)
三、Product Display 1 Smartphone Bracket 9 Working status indicator 2 Pan Motor 10 Tilt Motor 3 Charging indicator 11 Balance adjustment arm 4 Joystick 12 Balance Knob 5 Mode switching 13 Roll Motor 6 1/4 Threaded Hole 14 Bracket locking knob 7 Shooting Mode 15 Micro-USB Charging Port 8 Power ON / OFF
1. Smartphone Bracket: Holds smartphone steady. 2. Pan Motor: 320° rotation, responsible for the left and right stabilization of the picture. 3. Charging indicator: When charging, red light always on. Fully charged, green light always on. 4. Joystick: Adjust the shooting angle up, down, left or right according to the pushing direction. 5.
四、Balance Adjustment Adjustment methods: Load your phone before loose balance knob and move the balance adjustment arm. The tilt is balance if the mobile phone remains level when released, then tight the balance knob. Notices: Balance adjustment of mobile phone can make stabilizer work more energy-saving. When the balance deviation of mobile phone is large, the stabilizer can still work, but motors will consume too much electricity. At the same time, the torsion used to enhance stability also decreases.
5. Lateral / Vertical shooting mode 6. Shooting mode (based on Framing screen) ①Locked mode（the viewfinder screen does not follow the direction of rotation of the handle, and maintains a fixed direction） ：Mode switching switch slides to the top position, which is the locked mode. ②Half-follow mode（the handheld stabilizer follows the direction of rotation of the handle） ： Mode switching switch slides to middle position, which is the half-follow mode.
六、Specification Charging voltage 5V No.3 Motor (Tilt) -160°~160° Charging current 0.8~1A Battery specification 3.7V 2200mAh Working voltage 3.4~4.2V Battery duration approx. 4H Working current 0.2A~2A Working temperature 10℃~45℃ No.1 Motor (Pan) -160°~160° Net weight(including battery) About 390g No.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
