Remote Control User Manual DocID: Date: Version: Status: Model: 2014-07-11 0.
Confidential DRAFT Google Remote Control User Manual Table of contents 1. Battery Installation 3 2. Remote Features Overview 4 3. General Product Description 3.1 Input devices 3.2 Output devices 5 5 5 4. Functional Requirements 4.1 LED indication 4.2 Backlight 4.3 TV input key 4.4 IR mode 4.5 Database function & learn function 4.6 Pairing with TV Box 4.7 BT Link disconnected 4.8 Wake to listen 4.9 Factory reset 4.10 Power management 6 6 6 7 7 7 8 10 10 10 10 5. TV Box Communication 11 6.
Confidential DRAFT Google Remote Control User Manual 1. Battery Installation Battery installation Open battery cover at bottom side of remote control. Insert 2 x AA batteries. Ensure batteries are properly installed. Install back the battery cover. The remote control is ready to be used. 3/5 0.
Confidential DRAFT Google Remote Control User Manual 2.
DRAFT Confidential Google Remote Control User Manual 3. General product description 3.1 Input devices Key Buttons 3.2 Output devices IR LED: IR. It is used to transmit the selected codes and protocols via RF: It is used to send data over Bluetooth Low Energy “TV” Led Indicator – For IR related operation. Indicator LED: “TV Box” Led Indicator – For BLE related operation. 5/5 0.
DRAFT Confidential Google Remote Control User Manual 4. Functional requirements 4.1 LED Indication RC Unpaired RC Paired RC Before TV Setup/ Learn After TV Setup / Learn TV LED TV Box LED TV LED TV Box LED IR keys send IR BT keys send IR for TV IR keys send IR for BT keys send IR for (except ) for Box. TV Box LED TV. TV Box. TV Box. TV Box Led blinks continuously for blinks continuously BT key. TV Led blinks TV Box Led blinks for IR key*.
Confidential DRAFT Google Remote Control User Manual When the remote is stationary, and no keys are pressed (timeout from the last key pressed), the backlight will turn OFF. 4.3 TV Input Key When the TV Input Key is pressed, the navigation keys (UP, DOWN, LEFT, RIGHT, OK) will switch to IR mode for 5s (this value is configurable). If any other key (such as MENU) is pressed before the 5s timeout, this will cancel the IR mode. The navigation keys will revert to its previously operating mode. 4.
Confidential DRAFT Google Remote Control User Manual Feature Key sequence Learn <<1+5>>, , Learnable key: TV_POWER, INPUT, VOL+, VOL-, MUTE, UP, LEFT, OK, RIGHT and DOWN. The procedure is as following. 1. Press Digit 1 and Digit 5 simultaneously for 3 seconds. After 3 seconds the TV Power key LED will blink twice and remain on. Release all keys. 2. Enter a learnable key, the TV Power key LED gives a short inverse blink. After the key is released, the LED will start blinking. 3.
Confidential DRAFT Google Remote Control User Manual Each RC should pair with 1 TV Box. When trying to pair a previously paired RC to a TV Box, the previously paired information will be replaced on both the TV Box and RC. Before pairing, the TV_BOX Power key will only send IR code. After Pairing the TV_BOX power key will send both IR and BT. All other keys will send BT codes. 4.6.
Confidential DRAFT Google Remote Control User Manual 8. Subsequently, when the TV_BOX Power Key is pressed, the IR code will contain the Device ID and IR Command Code information (See Appendix). 9. The pairing will timeout after 30 seconds. After 30 seconds, the RC will goes to sleep mode. The RC will remain in the “unpaired” state. If the pairing fails, or pairing timeout, the RC will fall back to IR mode only.
Confidential DRAFT Google Remote Control User Manual 5. TV Box Communication When the RC is paired, Remote will use the HOGP profile for communication to the TV Box. RC to TV Box Report ID 0x02 0x03 Send Condition User press a remote key which has a HID keyboard code User press a remote key which has a HID consumer control code TV Box to RC Report ID Send Condition *Note : After pairing, the TV_BOX keys will send BT only. Only the TV_BOX Power key will send IR and BT.
Confidential DRAFT Google Remote Control User Manual 6. Firmware Updates (OAD) When there is a new firmware available for the RC, the TV Box will check if the current RC requires a firmware update. If the RC firmware is older, the TV Box will initiate the OAD process by sending the Start OAD process command. 12/5 0.
Confidential DRAFT Google Remote Control User Manual 7. Certification information FCC Bluetooth QD ID Place of Origin: Made in Indonesia. 13/5 0.
Confidential DRAFT Google Remote Control User Manual FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.