Philips Home Control Manual of KWR101830/01B, KWR101830/01BS & KWR101830BU Confidential ©Philips Home Control, 2013 Page 1 of 14
Philips Home Control FCC Statement FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
KWR101830/01B Manual (Draft Version) 1. Product Description 1.1 • • • • • • • • • • Product Features Dual button entry RC and KWR. Number of keys: 38 for KEYBOARD, 18 for RC. Total 56 keys. 4 main functions: Remote Control, Mouse Cursor Control, Qwerty KEYBOARD for text entry and downstream data transfer. 128k Flash for handling RF functions. 6 axis motion pointing. IR Learn using Data Flash. IR Database. IR uses Flash chip. Low voltage alert through LED blinks. Works with USB Receiver dongle OVU810006.
KWR101830/01B 1.
KWR101830/01B Manual (Draft Version) 2. RF Functions 2.1 RF Pairing 1) Make sure RC is within 1m distance from the STB and no other RF RCs are present. 2) Make sure the Qwerty keyboard faces upwards. 3) Press and hold Keyboard W and Keyboard O keys together for at least 5 seconds. 4) The KEYBOARD LED will start blinking, and RC is now in pairing mode. 5) Activate pairing mode on STB (STB sends activate command or reset dongle power).
KWR101830/01B Manual (Draft Version) 2.4 RF Broken Link RF link is broken when the RF (2.4G) connection is lost or when the receivers sleep or during system shutdown states (S3, S4 or S5) or due to out-of-range. 2.5 RF ACTIVE / SLEEP From RF ACTIVE >> SLEEP User action No key-press for less than 15 seconds. No motion senses for about 15 seconds. Remote Control action RF goes to SLEEP. In SLEEP mode, all LEDs are OFF. RF goes to SLEEP. In SLEEP mode, all LEDs are OFF. 2.
KWR101830/01B Manual (Draft Version) 3. Operational Features 3.1 Mode Switch 3.1.1 RC to Keyboard When in RC mode, KEYBOARD keys will be locked to prevent accidental presses. KEYBOARD keys can only be unlocked by tilting 90 degrees clockwise or anticlockwise. Once tilted more than 90 degrees, mouse cursor will stop moving if it is in Mouse mode. If KEYBOARD keys are faced up upon power up, a command will be sent from the RC. 3.1.
KWR101830/01B Manual (Draft Version) 3.4.1 Mouse Mode Default mode for mouse mode = OFF when first power up or upon a power recycle. There will be LED indication on TV POWER button on the activation and deactivation of motion sensor. Mouse mode will be disabled if user entered programming mode, i.e. IR Learning with mouse mode ON; user needs to press MOUSE key again if mouse function is needed after exiting programming mode. Downstream command from host can also toggle Mouse mode ON/OFF.
KWR101830/01B Manual (Draft Version) 3.6 LED Indicator Behaviour Total 3 backlit LED indicators: 1) RED colour, on TV POWER key, RC side, indicates all key-press events on RC side except for Mouse Left Click. 2) RED colour, on SYSTEM POWER key, RC side, for Mouse Left Click only. 3) AMBER colour, on TAB key, KEYBOARD side, indicates all key-press events on KEYBOARD side.
KWR101830/01B Manual (Draft Version) 4. Infrared Function The remote control has a default IR code table for 5 TV keys (TV POWER, VOL+, VOL-, MUTE and AV). These 5 keys also support IR Learning. 4.
KWR101830/01B Manual (Draft Version) 4.2 Infrared (IR) Learn Function – Reset While in IR Learning mode, by pressing the same learnable key twice, the key will revert to default (i.e. no code). The user shall also be able to reset all the 5 keys to the default setting. This is done by pressing the “VOL-” key and “SCROLL-” key simultaneously for 3 seconds. SYSTEM POWER key will turn ON and user has to release all keys. The RC starts erasing all learned data and returns to its original settings; i.e.
KWR101830/01B Manual (Draft Version) Please take note of the following points when performing the Database Scanning function: 1. The remote will NOT exit the Database Scanning mode, except for the following occurrence: 1. If no key selected within 30 seconds. 2. If stuck key timed out (not applicable for pressing “UP” key). 3. If “BACK” key is pressed. 4. If “LEFT” key is pressed after the 1st codeset in the search had last transmitted. 5.
KWR101830/01B Manual (Draft Version) 5. Non-Functional Requirements . 5.1 Simultaneous Key Press (RC) If more than one key-press is detected, the remote control will stop sending IR/RF code. Example: i. When Key 1 is pressed, Key 1 code is transmitted. Pressing Key 2, with Key 1 still pressed, RC will stop transmitting Key 1 code. Then, releasing Key 2, with Key 1 still pressed, Key 1 code will be transmitted again. ii. When Key 1 is pressed, Key 1 code is transmitted.
KWR101830/01B Manual (Draft Version) 5.6 Auto-repeating All the buttons have auto-repeat function, that is, when a key is continually pressed, the RC will transmit the corresponding code until the 30 seconds Stuck Key timeout. 5.7 Low Voltage Detection The RC comes with three 1.5V batteries working in series to give a total maximum of 4.5V ~ 4.8V. The depletion of the battery power will be in 2 stages. LED blinking is dependent on the remote control side, red LED for RC side, amber LED for KEYBOARD side.