CARD READER ‘HC-RD1’ USER MANUAL
HC KOREA Co. Ltd 1. Product Component Information Model Name : HC-RD1 POWER : Adopter DC5V 2A Description : This is the controller type RF Card Reader that control the particular equipment by input the time, price and number of time to use, etc. into card.
2. Description of the Product (1) Product Size (ABS) Width : 63mm / Length : 110mm / Height : 19mm (2) Card Reader ISO 1443A = mifare (reading and writing) RF frequency = 13.56 Mhz RFID distance = 5 ~ 10 cm Power supply = DC 5V 200 ma Operating Temperature = -30℃ ~ 50℃ (3) How to use If you place the card on the front of the device, designated price is deducted and then an designated amount of electric pulse is generated.
3. Description of the Parts < Caution > - If you touch and remove the card too fast on the card reader, reading error may occur. - Malfunction by noise of the connected equipment : Turn ON/OFF the power. If the issue continues, needed to find the cause of the problem by noise filter or grounding. - If the display flicker or not working, replace the adopter. (5V , 12V) - Keep the device away from the water and fire. - Watch out for separating 5V and 12V. DON’T input 12V to 5V adopter.
4. FCC 1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2) FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.