User Manual INTERACTIVE SMART BOARD 1
Directory 1.Main launcher 2. navigation bar 3. Annotations 4. Signals menu 5. Introduction to electronic whiteboards 6. document management introduction 7.screen registration steps and settings introduction 8.software screen function introduction 9.PC hardware screen function introduction 10. Matters needing attention in the use of screen transmitters 11.
.★ Main launcher. of the Conference After the boot is complete, enter the main interface of the system by default. ★. Introduction to the navigation bar. The navigation bar is divided into left and right navigation, stroke or click on the icon suspended on the left / right side of the screen to adjust the guide The function keystrokes are return, home page, task, comment, volume, signal source, OSD menu. Navigation bar expansion state without any operation 3 S will automatically hide.
Navigati on bar The detailed functional description is as follows: Return. Click on the icon to return or exit the current application. Home page. Click on the icon to enter the main interface of the system. Mission. Click on the icon, then enter the task management interface, you can choose to open or close the application. 1. In multitasking, touch the task list area and slide up and down to view the task list. 2.
★. Annotations. Click on the icon to open the annotation. ▲. Annotate toolbar instructions: 1. Touch Short Press Enable brush, touch length to call out the writing menu bar, can set brush color and brush size. 2. touch enable eraser. 3. touch enables picture file insertion, can insert external storage device picture file. 4. touch enable save annotation function, select twodimensional code sharing can achieve code sweep away. 5.
. ★ signal source menu. Click on the icon to call out the list of signal source channels, users can choose to switch the required channels. . ★ menu introduction. Click on the icon to call out the OSD menu, as shown in the following figure: menu classification in turn is general, network, time, intelligence, channel, system, about.
▲. General purpose. 1. Brightness: slide left and right to adjust backlight brightness. 2. Volume: slide left and right to adjust the sound size. 3. Wallpaper: switch Android main interface (launcher) background map. 4. Application management: manage to delete downloaded APP. 5. More management: modify theme, suspension menu switch, system prompt sound switch. ①. Desktop theme: modify UI theme style. ②. Suspension menu switch. ③. System sound switch. ④. Smart pen.
▲. Network settings. If you choose a network, you can set up network access mode (wired network or wireless network), wireless hot switch and view network details. Screen hot spot: when casting screen, open hot spot to connect. ▲. Time setting. According to the region set different time, network synchronization after networking.
▲. Smart settings. 1 ．Intelligent recognition: automatic recognition signal function, there are three options: jump (external high-definition signal access automatically cut to the channel), prompt box (external channel signal access prompt whether to switch), turn off the function. 2 ．Child lock: after the child lock function opens, the machine waits for the opportunity to lock, the default password is 2580, can set the password freely. 3 ．Timing switch machine time setting.
System upgrade: copy the corresponding firmware to the U disk root directory, after receiving the USB interface, click on the local upgrade, you can update the firmware.
II. Software . ★ introduction of electronic whiteboard. Click on the icon to open the electronic whiteboard. After boot, the default pencil tool is selected, It can be written directly. ①. Writing Click on the icon, pull out the brush tool menu, the default color is white, touch select brush color, thickness and brush style.
② . Eras e. 1. 2. Wipe: touch the icon and wipe only the note touched by your finger. Clear screen: touch icon, can clear the current page writing content. ③. Double-click to adjust the eraser size. Withdrawal and recovery Undo: touch the icon and undo the previous operation. Recovery: touch the icon to restore the revoked operation. Select erasure: after touch can circle the erasure content for erasure function.
Erasur e More than two fingers touch recognition erase. ) ④. Sketchpad background setting, save path. ■. Click on the pop-up function menu, touch other places to exit this menu. ⑴. Open file: click to open the saved BDZ format meeting record file, meeting link. ⑵. Save files: click to save the minutes of the meeting. ⑶. Scan code sharing: click on the network will generate twodimensional code, scan code can take away the minutes of the meeting. ⑷.
Ten touch switch ⑤. Sketchpad page addition and preview. ▲. Click on the lower right corner to add the page. ▲.
After the preview window pops up, double-click the single page to enlarge the desktop. . ★ document management introduction. 1 . Click switch local / external storage device preview. ②. Click / switch folder list, tile format. ③. Click to copy, paste, delete files.
★. Screen registration steps and settings are introduced. 1. Click on the main interface multi-screen interactive icon, then click on the low end of the interface "instructions for use" and pop up the following interface: Description of use 2.
Click on the "Registration Program" option to enter the registration code registration interface, registration needs to be online registration. After entering the corresponding registration code registration, the registration will pop up successfully. 3.
Screen pass password can only set digital password, when there is a device screen, will prompt input screen connection password, otherwise can not pass screen. ▲ set the rotation angle of the screen When a single screen is transmitted, the rotation angle of the screen can be set, as shown below: ▲ multi-screen screen settings, as shown below: When double screen transmission, open stretch full height option, cast screen can be full screen display.
▲ Back Mirror Settings Mirror Switch Mobile phone connected to the screen after opening the back mirror function, can touch the back control machine. . ★ software screen function introduction. Click on the main interface icon to enter the screen function introduction. 1. Apple device screen: Apple device connected to the hot spot of the conference machine AndroidAP, and then turned on the phone AirPlay mirror to achieve screen transmission. 2.
phone links to the hot spot of the conference machine AndroidAP, enters the corresponding password. Android Android IOS end When the phone is connected, on the connection page, you can choose to cast screen, virtual mouse remote control, screenshots, anti-mirror, video, music, pictures, documents to operate. Click on the document, you can push the PPT、Word document, Excel form, PDF to play in the whole machine.
Click Download Windows Client, then double click to run as follows: At this point, the machine list lists the smart meetings that can be found in the current notebook's LAN. Double-click the specified machine or IP address to automatically connect the device.
At this point, the connection between the notebook and the machine is the same as using a screen transmitter Click on the screen button, you can mirror the screen. After the use of screen and USB screen transmission process similar.
. ★PC hardware screen introduction. Screen cast 1. first open the Android board wifi hot spots, then connect the screen transmitter to the Android card USB interface for matching registration, after successful registration will pop up the following interface: Note: open the hot spot before matching and then connect the screen to match. 3. Connect the registered screen transmitter to the computer USB port.
5. touch back, double screen one-hand control. A large screen can be operated PC,PC a large screen can be operated. When the whole machine is connected to the Internet, the whole opportunity is automatically updated according to the background update. If it is found that the firmware version of the USB button does not match the firmware version of the whole machine, the prompt version will pop up at the computer screen. ★. Note for the Use of Screen Passers 1.
★. Introduction to VIP Reception Function Select the appropriate style page and double-click to enlarge, and then click the page to enter welcome words.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
