Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL Page 1 / 16 HBC – Radio Controls Radio Transm itter PM NTU for Industrial Cranes made for HBC-electronic Funktechnik GmbH Tel.: +49(0)7951/393-0 M a d e i n G e r m a n y Prod.Code: SNTU 1.0 Transmitter Ser.No.: 735IP55 / Nema 4 U Frequency Band (MHz): 902 – 918 W5 : FB1 FCC-ID: NO9 SNTU04 USA CAN : 6V DC Batt. HBC-radiomatic, Inc.
Operating Instructions Radio Transmitter PM NTU Page 2 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL Manufactured by : HBC-radiomatic GmbH Haller Strasse 49 - 53 74564 Crailsheim • GERMANY Telephone : +49 ( 0 ) 79 51 – 3 93 - 0 Fax : +49 ( 0 ) 79 51 – 3 93 – 50 E-mail : info@radiomatic.com http://www.hbc-radiomatic.com Distributed by : HBC-radiomatic, Inc.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL Page 3 / 16 Table of Contents 1 Description ...................................................................................................... 4 2 Safety Instructions .......................................................................................... 5 2.1 2.2 2.3 3 Pictographs .......................................................................................... 5 General Safety Instructions ............
Operating Instructions Radio Transmitter PM NTU Page 4 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL 1 Description The PM NTU transmitter is designed to transmit command instructions for controlling construction, industrial and mobile cranes, hoists and machines. Depending on the type and version selected, up to 32 digital or 8 analog + 24 digital control commands plus the integrated safety commands are available to the operator.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL 2 Safety Instructions 2.1 Pictographs Page 5 / 16 The following pictographs will be used throughout the present operating instructions : Indicates a possible shock hazard Contacting components under tension may lead to death. Housing (e. g.
Operating Instructions Radio Transmitter PM NTU Page 6 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL 2.2 General Safety Instructions Radio telecontrols facilitate and increase the operating efficiency of construction cranes.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL 2.3 Ø Ø Ø Ø Ø Page 7 / 16 Operator Safety Instructions Before beginning crane operation, position yourself so that you have a clear and complete overview of the working radius of the crane or machine.
Operating Instructions Radio Transmitter PM NTU Page 8 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL 3 1. 2. 3. Operating Instructions Before commissioning the transmitter or initial operation, insert a fully charged FuB 10 AA battery into battery compartment (pos. À) on the back of the transmitter (inscription must be visible). The battery supplies the necessary working voltage (6 V DC). Turn STOP switch (pos. Á) to the right to unlock.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL 3.1 Battery and Battery Charger 3.1.1 FuB 10 AA Transmitter Battery Page 9 / 16 The age and ambient temperature are decisive for the effectiveness of the battery charge. Older batteries lose capacity over time. Temperatures under zero also have a negative effect on battery charge. The length of serviceable battery life depend on how the battery is treated.
Operating Instructions Radio Transmitter PM NTU Page 10 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL 3.2 Special Operating Modes (Optional) This chapter describes special operating modes that are not available with all crane systems. If your radio telecontrol system is not equipped with the features described, you may ignore the following and continue with the next chapter. 3.2.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL 3.2.2 Page 11 / 16 tele-teach-in Battery (TTB 10) The PM NTU radio control – together with the FSE 735 and FSE 770 radio receivers – features the so-called tele-teach-in option. This specific function allows you to input and store the minimum as well as maximum speeds assigned to the individual joystick functions in a simple manner.
Operating Instructions Radio Transmitter PM NTU Page 12 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL Programming Switch OFF the transmitter. 2. Insert a charged tele-teach-in battery (TTB 10) into the transmitter. 3. Depress the programming keys "+" and "–" simultaneously and then switch ON the transmitter. Keep the programming keys depressed until the green service LED of the transmitter starts flashing quickly. Now, the control is in the tele-teach-in mode. 4. Setting the minimum speed (fig. right) min.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL 4 Page 13 / 16 Trouble-Shooting Note : Check the functions with the cabin or the cable control unit first ! Trouble No reaction whenever the transmitter is switched ON. Possible Cause − No operating voltage is present. Remedy − Check the battery contacts for damage or contamination. − Insert a fully charged battery in battery compartment. − Recharge battery. Low-power indicator blinks after minimal operating time, i.e.
Operating Instructions Radio Transmitter PM NTU Page 14 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL 5 Maintenance The radio system is largely maintenance-free. The following items should nevertheless be taken into account : Ø Ø Ø Ø Make sure that the STOP switch moves easily. Dirt of any kind may interfere with the operation of the switch or even render it impossible. Inspect the rubber bellows of the compact joysticks regularly for leak-tightness.
Operating Instructions Radio Transmitter PM NTU BE-PM_NTU-US-L.DOC [ Word 97 ] FL Page 15 / 16 6 Technical Data General Technical Data System PM NTU Max.
Operating Instructions Radio Transmitter PM NTU Page 16 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL Dimensions of the PM NTU 0 I 131 mm (5.2 ") rpm rpm ca. 140 mm (5.5 ") 6.1 85 mm (3.3 ") 210 mm (8.3 ") File: PM-NTU-Dimensions&OPControls.CDR [ CorelDRW 8.0 ] 14.08.2000 FL HBC-electronic Funktechnik GmbH Tel.: +49(0)7951/393-0 Made in Germany IP55 / Nema 4 UBatt. : 6 V D C Frequency Band (MHz): 902– 918 W5 : FB1 FCC-ID: NO9 SNTU04 USA Micron: NO9M30004 Eco: NO9E10004 Spec.