Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB HBC Page 1 / 18 – Radio Control Radio Tr ansm itter cubix HBC-radiomatic GmbH • D-74564 Crailsheim • Germany Information and specifications subject to change without notice.
Operating Instructions Radio Transmitter cubix Page 2 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB Manufacturer : HBC-radiomatic GmbH Haller Straße 49 - 53 74564 Crailsheim • Germany Tel. +49 ( 0 ) 79 51 – 3 93 - 0 Fax +49 ( 0 ) 79 51 – 3 93 - 50 E-mail: info@radiomatic.com http://www.hbc-radiomatic.com HBC radiomatic GmbH is not liable for any misprints or errors! – All rights reserved. ™ radiomatic is a registered German trademark.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB Page 3 / 18 Table of Contents 1 Description ..................................................................................4 2 Safety Instructions ....................................................................5 2.1 2.2 2.3 Pictographs ..................................................................................... 5 General Safety Instructions ...................................................
Operating Instructions Radio Transmitter cubix Page 4 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 1 Description The cubix transmitter is designed to transmit command instructions for controlling industrial cranes, hoists and machines. 10 control commands plus the integrated STOP commands are available to the operator. A non-interchangeable system address ensures the functional safety of the radio control system when operating cranes or machines.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 2 Safety Instructions 2.1 Pictographs Page 5 / 18 The following pictographs will be used throughout the present operating instructions : Indicates a possible shock hazard Contacting components under voltage may lead to death. Housing (e.g.
Operating Instructions Radio Transmitter cubix Page 6 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 2.2 General Safety Instructions Radio controls facilitate and increase the operating efficiency of cranes and machines.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 2.3 ! Page 7 / 18 Operator Safety Instructions Before beginning crane operation, position yourself so that you have a clear and complete overview of the working radius of the crane or machine. To operate, hold the transmitter securely in your hand. Use the optional belt-clip. Follow these instructions to ensure personal safety.
Operating Instructions Radio Transmitter cubix Page 8 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 2.4 FCC-Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 3 Page 9 / 18 Operation Caution : The operation of the transmitter is permissible only with the carrying set included with the transmitter (possibility of mixing up the operator controls) ! Switching ON the Transmitter 1. 2. 3. 4. 5. Before commissioning the transmitter or initial operation, be sure that the transmitter is fully charged. The battery supplies the necessary working voltage (3.6 V DC).
Operating Instructions Radio Transmitter cubix Page 10 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB Should the operator – intentionally or unintentionally – switch OFF the transmitter with the STOP pushbutton, press only the START pushbutton again for further use of the radio control. ℜ ℵ Switching OFF the transmitter ℑ To switch off the transmitter completely follow these instructions: Press the STOP pushbutton (pos. ℑ) to the 1 st step and hold it pressed.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB Page 11 / 18 Parking To lock the pushbuttons while working provides uncontrolled usage of the crane / machine while working at the crane / machine. The pushbuttons are completely locked that means without any control of the receiver except the pushbutton HORN. Activate Parking-Mode press the START pushbutton to the 1 st step and hold it pressed for more than 2 seconds. Now the parking-mode is activated.
Operating Instructions Radio Transmitter cubix Page 12 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 3.2 Charging 3.2.1 Internal Battery The cubix-transmitter is fitted with an internal NiMh-Battery (3.6V, 650 mAh). To charge the battery, connect the powersupply with the plug of the cubix transmitter (See picture 1, Pos ℵ). The age and ambient temperature are decisive for the length of the battery applications. Older batteries lose capacity over time.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB Page 13 / 18 Note : – A discharged battery recharges in approx. 1.5 hours. – The charging of NiMh batteries should only take place at temperatures between 0 °C and +40 °C (32 °F and 104 °F). 3.3 Power-Supply The connector of the power-supply is changeable for almost all kind of plugs. Changing the plug - Release the plug by moving the locker (Pos. ℵ) towards the cable outlet.
Operating Instructions Radio Transmitter cubix Page 14 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 4 Fault Correction Note : Please check the transmitter functions using the cabin or cable controls first ! Problem Remedy The transmitter does not react when switched on. − There is no power.
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 5 Page 15 / 18 Maintenance The radio control system is virtually maintenance-free. The following points, however, should be taken into consideration : ! ! Ensure that the STOP pushbutton works smoothly. Mortar residue and contaminants of any kind can reduce or fully block the switch function. Never use a high-pressure cleaner or steam jet cleaner to "clean" the transmitter.
Operating Instructions Radio Transmitter cubix Page 16 / 18 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 6.1 Technical Data transmitter cubix General Technical Data cubix System 10 + STOP Number of control commands Unique system address over 65.000 combinations Internal Battery type 3,6 V DC; 650 mAh / NiMh Charging time for internal battery approx. 1,5 h Battery life at 100 % duty cycle approx. 16 h –20 °C ...
Operating Instructions Radio Transmitter cubix BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB 6.1 Page 17 / 18 Dimensions HBC-radiomatic GmbH • D-74564 Crailsheim • Germany Information and specifications subject to change without notice.
Operating Instructions Radio Transmitter cubix Page 18 / 18 Radio Control System 2003-03-11 BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB HBC-radiomatic GmbH • D-74564 Crailsheim • Germany Information and specifications subject to change without notice.