User's Manual

55 mm
80 mm
产品介绍
耳机基本参数
充电盒基本参数
通讯距离：10米（无障碍空旷环境）
电池容量：50mAh（单耳机）
充电时间：约1.5小时
通话时间：约3.5小时
待机时间：约140小时
输入参数：5V 100mA
电池类型：锂离子聚合物电池
无线连接：蓝牙5.0
输入参数：5V 1000mA
输出参数：5V 500mA
充电时间：约2.5小时
待机时间：约4个月
电池容量：600mAh
电池类型：锂离子聚合物
Haylou蓝牙耳机售后服务承诺:严格按照《中华人民
共和国消费者权益保护法》、《中华人民共和国产品
质量法》实行售后三包服务，服务内容如下:
在三包有效期内，您可凭购物凭证依照本规定享受免
费的修理、更换、退货的权利。
1、自您购买之日起7日内，本产品出现故障，经由
Haylou售后服务中心确定为产品质量问题，可享
受修理、更换、退货的服务。
2、自您购买之日15日内，本产品出现故障，经由
Haylou售后服务中心确定为产品质量问题，可
享受修理或更换的服务。
3、自您购买之日起12个月内，本产品出现故障，经
由Haylou售后服务中心确定为产品质量问题，
可享受修理的服务。
售后服务与支持
保修期：
自产品购买之日起12个月(请妥善保管购买凭证)
免费服务：
在产品保修期内，凡属产品本身质量引起的故障，请
用户凭购买凭证与经销商取得联系以享受售后服务。
如有任何产品损害或瑕疵非可归责于产品质量本身，则不
在保修范围内。有下列情形者不属于保修范围内：
1、因天灾、地震、雷击、异常电压、环境因素而发
生之故障或毁损的。
2、自行或委托未经原厂授权维修之厂商拆卸、改装
或更换非原厂零件。
3、未按使用手册操作或因人为使用不当而造成损坏
者，如产品浸水、腐蚀、掉落、挤压或露在异常
温湿度环境下。
若有售后服务需求,请联系Haylou客服
制造商：东莞市猎声电子科技有限公司
制造商地址:东莞市南城街道周溪社区隆溪路5号高盛科技
园二期之高盛科技大厦第13层1303、1305、1306单元
生产厂：东莞峥嵘电子有限公司
生产厂地址：广东省东莞市洪梅镇疏港大道4号
网 址：www.haylou.com
客服电话：4008-555-083
Haylou蓝牙耳机售后服务
包装内容物
佩戴耳机
开始使用开机
耳机在充电盒内，从充电盒中拿出耳机自动开机。
耳机不在充电盒内且已关机，敲击2次，则为开机
（白灯亮起1S）。
注意：耳机出厂时已完成初始化，可直接取出进行相
关操作。
手动连接：在耳机关机时，手动打开两只耳机，白灯
快闪等待左右耳机串联，串联成功后主耳机白灯慢闪，
打开设备蓝牙进行连接。
充电
首次开机使用，将耳机及充电盒满电。
插入充电线可同时给耳机和充电盒充电。
充电盒充电中，充电指示灯红灯长亮，充满电后白灯
常亮。
未外接TYPE C充电，耳机放入充电盒，耳机充电中，
红灯慢闪。耳机充满电，红灯熄灭。
功能要点
产品特性
任意耳机敲击2次
来电时，接听/挂断电话
待机时，开启语音助手
音乐时，切换上一曲
音乐时，切换下一曲
任意耳机敲击3次
L耳敲击2次
音乐时，播放/暂停
戴上耳机/取下耳机
1、蓝牙5.0真无线，拿起就用
新一代蓝牙5.0芯片，摆脱传统蓝牙耳机和有线耳
机线缆的困扰,更低延迟，带来更方便自由的体验。
2、APTX+AAC无损高清音质
进口高通3020芯片，iOS+Android双系统兼容，
完美还原音乐细节。
3、四向麦克风通话降噪
四向麦克风精准拾音，深度消除环境背景音，呈
现面对面高清通话体验。
4、红外佩戴检测
高度智能的佩戴探测：佩戴自动播放，取下自动
暂停。
5、振动反馈传感器，精准操作
敲一下，可以接听挂断，上一曲/下一曲。
6、30小时持续播放音乐
超低功耗，三倍提升续航时长。一次充电，耳机
持续播放5小时；充电盒提供25小时电量。
7、无线充电
TAP-C充电接口，同时配置高效率无线充电，可接
受手机、无线充电设备对其充电。充电舱剩余电
量随时看，实时提醒及时充电。
8、主从切换，稳定连接
TWS+双向通信，双发双收，彻底解决失联断连问
题，连接更稳定。
9、强大APP，开盖弹窗快速连接
搭载HAYLOU APP，体验开盖弹窗，一键复位、定
制EQ等丰富功能 *详情参考APP说明*。
Product features
1、Bluetooth 5.0 true wireless, just pick it up
New generation bluetooth 5.0 chip, get rid of
traditional bluetooth headsets and wired ears
Cable trouble, lower latency, more convenient
and free experience.
2、Four-way microphone noise reduction
Four-way microphone accurately pick up sound,
depth of the elimination of environmental
background sound, face to face hd phone
experience.
3、Vibration feedback sensor, precise operation
Knock once, you can answer and hang up, the
previous song/the next song.
4、Play music continuously for 30 hours
Ultra-low power consumption, triple increase
endurance.5 hours of continuous playback on
one charge;The charging box provides 25 hours
of power.
5、Wireless charging
Tap-c charging interface with efficient wireless
charging, which can accept charging from mobile
phones and wireless charging devices.The remaining
charge of the charging cabin will be watched at
any time, and real-time reminder will be given for
timely charging.。
R耳敲击2次
耳帽×3双（中号已装入耳机中），耳机，充电盒，
数据线，说明书。
耳机一边有声一边无声
充电时遇到的其他情况
极端情况才会出现此类情况，发生后请参考耳机重置
步骤，然后检查手机的蓝牙连接状况，清除蓝牙设备
后重新连接即可。
1、耳机充满电后，白灯常亮30秒后熄灭，此时耳机
处于满电状态；
2、充电仓没电会导致耳机无法充电；
3、充电盒充满电后，充电指示灯会熄灭，此时若再
次接入充电线，充电指示灯则不会提示，不代表
充电盒不能充电。
日常维护
请勿佩戴耳机洗澡，淋雨，放入洗衣机及在异常温度
情况等极端环境使用，每次正常使用后，请用干布等
工具擦干耳机上的汗汁或者雨水，可以有效延长耳机
的使用时长。
耳机重置
如果耳机无法正常连接使用，请参照以下方式重置耳
机：打开充电盒，放入耳机，长按盒子背面触摸键2
秒松开，再长按盒子背面触摸键5秒松开进行复位。
LED灯
充电触点
Haylou-T16 主动降噪真无线蓝牙耳机
使用说明书
Haylou-T16
ANC TWS Bluetooth EarBuds
User Manual
将耳机轻轻塞入耳道，调整耳机达到最佳佩戴状态。
敲击2次
白灯亮起1S
自动连接：同时将两只耳机从充电盒取出，等待2-3秒
耳机自动开机串联，待TWS组队后默认右耳为主耳开
始慢闪进入配对状态，打开设备蓝牙搜索
“Haylou-T16 R或Haylou-T16 L”并点击完成连接。
如果连接失败，将耳机放回充电盒，重复上述操作。
首次连接后，耳机开机可自动回连上一次配对设备
（蓝牙需开启）。
Haylou-T16
Haylou-T16 R
单耳自动连接：从充电盒取出一只耳机，自动开机后，
指示灯由白灯快闪变成慢闪时，打开设备蓝牙搜索
“Haylou-T16 R或Haylou-T16 L”并点击完成连接。
单耳手动连接：在耳机关机时，手动开启其中一只耳
机，待耳机变成白灯慢闪时，打开设备蓝牙连接对应
耳机。
使用年限
如本手册所述，在正常使用条件下，本产品的环保使用
期限为10年。
在此期间，产品不会泄露任何危险物质，本产品可以回
收，必须按照当地法规处理。
产品中有害物质的名称及含量
有害物质
部件名称
铅
Pb
汞
Hg
镉
Cd
六价铬
Cr
(VI)
多溴
联苯
PBB
多溴
二苯醚
PBDE
邻苯二
甲酸二
异丁酯
DIBP
邻苯二
甲酸
（2-乙酯）
DEHP
邻苯二
甲酸二
丁酯
DBP
邻苯二
甲酸丁
苄酯
BBP
耳机主体
电 池
耳 套
配 件
充 电 线
本表格依据SJ/T11364的规定编制
O: 表示该有害物质在部件所有均匀材质中的含量均在
(EU) 2015/863规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量
超出(EU)2015/863规定的限量要求，但目前行业无成熟
的替代方案，在豁免范围仍符合欧盟ROHS指令的环保
要求。
三包凭证
产品型号
用户信息
用户姓名
用户地址
购买日期
邮政编码
订单编号
联系电话
销售单位
购买信息
麦克风
充电口
充电指示灯
充电针
白灯亮起1S
任何状态下，放入充电盒中，耳机充满电后自动关
机。耳机开机，无任何设备连接，等待5分钟关机。
关机
Manual pairing: power off earbuds then manually
power on them again. Earbuds will auto enter
TWS pairing mode(LED blinks white promptly)
and finish pairing when LED on master earbud
blinks white slowly. On cellphone, search the
earbuds and tap to connect.
Functions
Double tap either earbud
Answer/end call
Activate voice assistant
(standby)
Skip track backward
Skip track forward
Triple tap either earbud
Double tap left earbud
Double tap right earbud
Factory Setting
Please adjust earbud to fit youself best.
Tap twice
LED glows
white for 1s
Pop earbuds into the case to charge them.
They will auto power off once topping up.
Earbuds will auto power off if no connection is
built in 5 minutes.
Audio only outputs from single earbud
Other cases in charging
It's really rare. Please reset GT1 Pro, remove connectivity
If earbuds do not function well, please refer the
following steps to reset factory: Push earbuds back
into the case, open the lid and triple click the case to
set them to factory. Earbuds will then auto pair with
each other. Right earbud will serve as master and
become connectable to cellphone when LED
blinks white slowly. (If earbuds stay in the case, they
will only be charged after pairing with each other).
record on your cellphone and re-connect the
earphones to your cellphone.
LED glows solid white for 1 minute when earbuds
are topped up.
Carry case cannot charge earbuds, if its battery drains.
LEDs on carry case will turn off once the case is
topped up. If you charge it once again, LEDs will
not give any notice, which does not mean the case
is not charged.
Daily maintenance
Please do not shower with earbuds. Do not wear them
in rainy day. Do not leave them in washing machine
or other extreme situations. Clean them with dry cloth
after use in pursuing a longer service life.
Aftersales & Support
Warranty Period:
12 months after purchase
(please keep your receipt properly)
Free Service:
If any quality defects happen during the warranty period,
please take the receipt and contact with your distributor
for aftersales service.
Following cases or any damages/defects that are not due to
quality issue are not covered in the warranty.
1. Any defects or damages caused by natural disasters,
abnormal voltage or other environmental facts.
2. Any unauthorized disassembly, modification or change
of parts.
3. Any damages caused by improper use of the product
including soaking, corroding, falling down, squeezing or
exposure to abnormal temperature or humidity.
Model Number:
Date of Purchasing:
User's Phone:
User's Name:
User's Address:
Shop's Name:
Shop's Address:
Comments:
Basic Parameters(earbuds)
Basic Parameters(charging case)
Input parameter:5V 500mA
Output parameter:5V 150mA
Charging time: approx. 2.5hr
Standby time: approx. 4 months
Battery capacity: 600mAh
Battery type: li-ion
What's in the Box
Eartips * 3 pairs(medium size eartips have
been put on), earbuds, charging case,
USB cable, user manual.
Operation range: 10m ( open space with no
obstacle )
Battery capacity: 40mAh(single earbud)
Charging time: approx. 2hr
Talk time: approx. 5hr
Standby time: approx. 140hr
Input parameter: 5V 100mA
Battery type: li-ion
Bluetooth version: v5.0
How to Wear
How to Charge
Power-on
Pick up earbuds from the case to power them on.
If earbuds are out of the case, tap earbud twice
to power on(LED glows white for 1s).
Power-off
LED glows
white for 1s
Daily maintenance
Please do not shower with earbuds. Do not wear them
in rainy day. Do not leave them in washing machine
or other extreme situations. Clean them with dry cloth
after use in pursuing a longer service life.
Caveats
1. Please charge the product, in case it has not been
used over two weeks.
2. Please use certificated charger.
3. Do not wear earphones for a long term to protect
your hearing.
4. Do not wear earphones in any situations with
potential risks as wearing them may reduce your
perception to the outside world.
Overview
Stereo Mode Mono Mode
Auto connection: take up two earbuds from the
case, they will auto power on and pair with each
other in 3s(right earbud will serve as master as the
default). When LED blinks slowly, search for
Haylou-T16 R/L on phone and tap to connect.
If earbuds fail to connect to phone, please pop
them back into case and repeat the above steps.
Earbuds will auto reconnect to the last device in
connectivity records, if any. ( Bluetooth faculty
needs to be activated ).
Note: T19 has been set to factory before shipping out.
Auto connection: take up either earbud from the case.
The earbud will auto power on and LED will then blink
white slowly. On cellphone, search for Haylou T16 and
tap to connect the earbud to cellphone.
Once power on, earbud will auto reconnect to the last
device in connectivity records, if any. ( Bluetooth
faculty needs to be activated ).
Manual pairing: power off earbuds then manually
power on either earbud. When LED on the earbud
blinks white slowly, search for the earbud and tap on
cellphone to connect.
CMIIT ID: XXXXXXXXXX
FCC ID: 2AMQ6-T16
注意
1、使用产品前请仔细阅读本使用说明书并请妥善
保管。
2、首次使用时，请先将本产品充满电。
3、如果产品长期(超过2个星期)不用，请对其充电。
4、必须选择正规厂家生产且经过国家CCC认证的
充电器。
5、长时间连续使用耳机有损听力，请合理控制使
用时间及音量。
6、使用耳机会降低对外界声音的感知力，请不要
在可能威胁到安全的环境中使用耳机。
警告
1、请勿以任何理由拆开、维修或改装耳机，否则
可能会导致起火甚至彻底损坏本产品。
2、请勿将设备置于温度过低或过高（0℃以下或
45℃以上）的环境下。
3、使用产品指示灯时，请避开儿童或动物的眼睛。
4、请勿在雷暴天气下使用本产品，雷暴可导致设
备工作异常，并增加触电的危险。
5、请勿使用酒精或其他挥发性液体擦拭本产品。
6、请勿将本产品与液体接触。
注意事项
说明书中的产品、配件、用户界面等插图均为示意图，
仅供参考。由于产品的更新和升级，产品实物与示意
图可能略有差异，请以实物为准。
使用产品前请仔细阅读本说明书，并妥善保管。
Haylou T19 性能故障表
蓝牙耳机
性能故障
1. 使用过程中听不到声音。
2. 通话过程中，对方听不到声音。
3. 无法充电。
名称
非保修条例
1、使用造成的正常磨损脏污如：刮痕、腕带颜色
改变；因接触化学试剂、接触尖锐物体、掉落
挤压等人为导致损坏。
2、未经授权的维修、误用、碰撞、疏忽、滥用、
进液、事故、改动、不正确的使用非本产品配
件或撕毁、涂改标贴、防伪标记。
3、已超过三包有效期。
4、因不可抗力造成的损坏。
5、不符合《Haylou T16 主动降噪真无线蓝牙耳机
产品性能故障表》所列性能故障的情况。
6、因人为原因导致本产品及其配件产生《Haylou
T16 主动降噪真无线蓝牙耳机产品性能故障表》
所列性能故障。
Please top up both earbuds and charging case
before first time use.
Charge both earbuds and case via USB cable.
LED glows solid red when case is charging and
turns white once topped up.
Push earbuds into case(with no USB cable) to
charge them. LED blinks red slowly when earbuds
are charging and turns off once they are topped up.
Haylou-T16
Haylou-T16 R
LED
Pogo Pins
Pogo Pins
Microphone
Charging Port
LED
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference,
and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try correct the interference by one or more
of the following measures:
-Reorient the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into and outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.