Getting Started Guide

Table Of Contents

Personal Sleep Routine, Sleep Sounds,

Reading Light, & Sunrise Alarm

GET T I N G S T ARTED

GET T I N G TO KNOW HATCH RESTORE

Plug in Restore

Connect the custom power

cable to Restore, then plug it

into your power outlet.

Download the app

Search for the Hatch Sleep app

on the Apple App or Google Play

store and download it to your

phone or tablet.

Connect your Restore

Open the Hatch Sleep app

and follow the steps to connect

your Restore.

Touch Sensor

Tap the top of your Restore at bedtime to begin your sleep routine. Press and

hold to turn oﬀ Restore.

Power Cable Port

Keep your device plugged in for normal use.

Brightness Control

Press the brightness control buttons to increase or decrease brightness.

Volume Control

Press the volume control buttons to increase or decrease volume.

Clock

Illuminate, dim, or turn oﬀ the clock by using your Hatch Sleep app.

Reset Button

Press and release with a paperclip to reset the device.

Brightness

Control

Volume

Control

Touch Sensor

FCC ID:2AFYZ-RESTORE01

PAGE 1
FCC ID:2AFYZ-RESTORE01 Personal Sleep Routine, Sleep Sounds, Reading Light, & Sunrise Alarm G E T T I N G S TA R T E D 1 Plug in Restore Connect the custom power cable to Restore, then plug it into your power outlet. 2 Download the app Search for the Hatch Sleep app on the Apple App or Google Play store and download it to your phone or tablet. 3 Connect your Restore Open the Hatch Sleep app and follow the steps to connect your Restore.
PAGE 2
THINGS TO TRY Set up your Routine Personalize how you fall asleep, stay asleep, and wake up. Each part of your routine can be turned on or off and customized to meet your sleep needs. Read: Reading a book (not your phone!) for at least 20 minutes before bedtime is a wonderful way to wind down. You can create a custom shade or select our Reading Light color, designed to be bright enough to read by but not blue enough to keep you awake.
PAGE 3
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.