Product Manual 14221-6200-6040 Rev.
14221-6200-6040, Rev. A MANUAL REVISION HISTORY REV DATE REASON FOR CHANGE - Aug/15 Initial release. A Sep/15 Deleted Section 2.2.2. Other minor revisions/corrections. Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for completeness, technical accuracy, and organization.
14221-6200-6040, Rev. A Section TABLE OF CONTENTS Page 1 INTRODUCTION.......................................................................................................................... 4 1.1 DESCRIPTION ......................................................................................................................... 4 1.2 SCOPE ....................................................................................................................................
14221-6200-6040, Rev. A 1 INTRODUCTION 1.1 DESCRIPTION The PBM-214 Module functions as LTE User Equipment (UE) capable of operating on 3GPP Band 13, Band 14, and Band 4 LTE networks. It is integrated into Harris mobile and portable data terminals. The PBM-214 is certified by the FCC as a modular transmitter and is not shipped with antennas. Figure 1-1: PBM-214 Module 1.2 SCOPE This document outlines the use and installation guidelines for integrating the PBM-214 LTE Module into host devices.
14221-6200-6040, Rev. A 2 REGULATORY AND SAFETY INFORMATION 2.1 REGULATORY APPROVALS 2.1.1 Transmitter The transmitting devices listed below have been tested and meet the following regulatory requirements: 2.1.2 MODEL DESCRIPTION 3GPP Bands FCC ID (PART 90) PBM-214 LTE Module 4, 13, 14 BV8BBPBM214 Receiver The receiver associated with this transmitting device has been tested and declared to meet the regulatory requirements. 2.1.
14221-6200-6040, Rev. A 2.1.4 Labeling The FCC labeling of the module is shown below. When integrating the module into a host, the label must be visible through a window, visible through an access panel that is easily removed, or a second label must be placed on the outside of the host device that contains the following text: Contains FCC ID: BV8BBPBM214. The module has capability for electronic labeling to the host device; please contact technical support to access this capability.
14221-6200-6040, Rev. A LTE OPERATING BAND TRANSMITTER FREQUENCY POWER DENSITY at 20cm MAXIMUM ANTENNA GAIN 4 1732.5 MHz 0.199 mW/cm² 4.
14221-6200-6040, Rev. A 3 INSTALLATION GUIDELINES 3.1 INTRODUCTION Careful planning and preparation of any installation will always benefit the end result; always read and follow all installation instructions. Follow ESD precautions and prepare an ESD safe workspace for installation. Turn the power to the host off and ground yourself to dissipate static charge. Mount only in sockets and locations intended for PCI Express M.
14221-6200-6040, Rev. A 4 SPECIFICATIONS 4.1 GENERAL SPECIFICATIONS Model Number: PBM-214 Physical Characteristics: Electrical Power: 3.3 VDC Power Consumption: 3.0 Watts maximum Size (H x W x D): 42 × 30 × 2.3 mm Weight: 13 g Environmental Specifications: Operating Temperature: -30°C to +60°C Storage Temperature: -40°C to +85°C Altitude: 15,000 ft. (operational) System Interfaces: 4.2 Host PCI Express M.
14221-6200-6040, Rev. A 5 CUSTOMER SERVICE 5.1 CUSTOMER CARE If any part of the system equipment is damaged on arrival, contact the shipper to conduct an inspection and prepare a damage report. Save the shipping container and all packing materials until the inspection and the damage report are completed. In addition, contact the Customer Care center to make arrangements for replacement equipment. Do not return any part of the shipment until you receive detailed instructions from a Harris representative.
14221-6200-6040, Rev.
Public Safety and Professional Communications | www.pspc.harris.