Assembly Instructions

WARNING

1.This product contains bolts and other small parts that may present a chocking hazard for children 3 years or

under.This unit must be assembled by an adult.

2.periodically check the safety of your product by making certain all bolts and nuts are tightened securely.

CAUTION

Place the back frame(A) on the base(B) and align the

holes in the back frame(A) with the holes on the

base(B).Use the screw (H) in each of the two holes as

shown and tighten with allen key (I),Put (K) into the

seat top.

1pc 1pc 2pcs

2pcs 1pc 1pc

COMPONENT PARTS

Back Frame

Base armrests

Back Cushion

Seat Cushion

H I

2pcs 2pcs

30mm SCREWS AND

WASHERS

PARTS LIST

ALLEN KEY

Armrest

Cushions

METAL PLUGS

METAL ROD

STEP 1

NOTE:

DO NOT TIGHTEN SCREWS

UNTIL STEP 3.

Page 2-1

ASSEMBLY INSTRUCTIONS

Glider/Rocker with Ottoman

WOODEN

PLUGS

2pcs

45mm SCREWS AND

WASHERS

2pcs

PAGE 1
ASSEMBLY INSTRUCTIONS Glider/Rocker with Ottoman WARNING ! CAUTION 1.This product contains bolts and other small parts that may present a chocking hazard for children 3 years or under.This unit must be assembled by an adult. 2.periodically check the safety of your product by making certain all bolts and nuts are tightened securely. COMPONENT PARTS A 1pc B 1pc C Base Back Frame 2pcs NOTE: armrests DO NOT TIGHTEN SCREWS UNTIL STEP 3.
PAGE 2
NOTE: STEP 2 DO NOT TIGHTEN SCREWS UNTIL STEP 3. C ① ② ③ J STEP 3 STEP 4 Attach the armrest cushions (D) to the armrest(C) by the velcro along the interior seat and on the sides. Use (I) tighten (J) Also tighten (L) Which connect armrest(C) and back frame(A). Cover the hole via wooden plugs(G) onto back frame(A). G L STEP 5 D STEP 7 STEP 6 Attach the back cushion (E) to the back frame(A). Attach the seat cushion (F).