Manualshelf

Installation & Assembly

ManualsBrandsHarriet Bee ManualsBaby & KidsGoddard Ranch Twin over Twin Bunk Bed
12345678910
Thank you for purchasing this quality product.
Be sure to check all packing materials carefully
for small parts which may have come loose in-
side the carton during shipment. Separate,
identify and count all parts and hardware.Com-
pare with the parts list to be sure all parts are
present.
"DO NOT TIGHTEN SCREWS
UNTILCOMPLETELYASSEMBLED”
SAFETYWARNINGS!
1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do
not remove warning label from bed.
2-Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood
of entrapment or falls.
3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails.
4- Do not allow children under 6 years of age to use the upper bunk.
5- Prohibit more than one person on upper bunk.
6- Periodically check and ensure that the guardrail, ladder and other components are in their proper posi-
tion, free from damage, and that all connectors are tight.
7- Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving the upper bunk.
9- Do not use substitute parts. Contact distributor or dealer for replacement parts.
10- Use of a night light may provide added safety precaution for a child using the upper bunk.
11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should
be placed against the wall to prevent entrapment between the bed and the wall.
12-Always use guardrails on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instructions for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc.
IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE STARTING THEASSEMBLY
Inst
ct
io
s
n
ru
st
tio
c
s
n
ru
ASSEMBLYINSTRUCTIONS
SIZE OFMATTRESSAND FOUNDATION (SUPPORT)
total thickness must not exceed inchess. Do not use mattress without the proper bunkie board or safe9"
foundation.
Note:There must be at least inches from top surface of mattress to top edge or guardrails.5"
TO OBTAIN PARTS, PLEASE CONTACT:
This bed is designed to use a twin mattress ( 37 ½”- 38 ½”x 74 - 75") and bunkie board (37 ½"x 74").The
REPLACEMENT PARTS.
Replacement parts, including additional guardrails, may be obtained from place of purchase or original
distributor.
V-2004 ECONOMIC
BUNK BED
DONCO TRADING COMPANY- FORT WORTH,TEXAS

Summary of content (10 pages)