ASSEMBLY INSTRUCTION BARTHOLDI SOFA SET WF190610AAC WF190610AAA
F J D I B B C E A A M K H G L Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during asembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part list A B Right frame (3 pcs) D C Left frame (3 pcs) Seat frame (2 pcs) E F Back frame (2 pcs) Bench seat frame (1 pc) H Bench back frame (1 pc) I Table right frame (1 pc) Table left frame (1 pc) K Seat cushion (2 pcs) G J Back cushion (1 pc) M Table glass (1 pc) Table top frame (1 pc) L Table shelf frame (1 pc)
Hardware list 1 2 3 Bolt M6 x 25 mm (4 pcs) Bolt M6 x 35 mm (23 pcs) Bolt M6 x 40 mm (16 pcs) 4 5 Bolt M6 x 60 mm (6 pcs) Allen key M4 (1 pc)
STEP 2 STEP 1 (Chair assembly) Connect Back frame (D) & Seat frame (C) with Bolt (3) Connect part from Step 1 & Right frame (A) with Bolt (3) & Bolt (4) D 3 4 3 3 3 C A STEP 3 STEP 4 Connect part from Step 2 & Left frame (B) with Bolt (2), Bolt (3) & Bolt (4) 4 3 3 3 B Put on Seat cushion (I) to complete single chair I
STEP 5 (Bench assembly) Connect Bench seat frame (F) & Bench back frame (E) with Bolt (3) F 3 3 3 E STEP 6 Connect part from Step 5 & Right frame (A) with Bolt (2), Bolt (3) & Bolt (4) 3 3 4 A
STEP 7 Connect part from Step 6 & Left frame (B) with Bolt (2), Bolt (3) & Bolt (4) 4 3 3 B STEP 8 Put on Bench cushion (J) to complete Bench J
STEP 9 (Table assembly) Connect Table left frame (H) & Table top frame (K) with Bolt (1) STEP 10 Connect part from Step 9 & Table right frame (G) with Bolt (1) K 1 1 1 1 H G STEP 11 Connect part from Step 10 & Table shelf frame (L) with Bolt (2) STEP 12 Put on Table glass (M) to complete the Table M 2 L 2
