HARMAN KARDON GO + PLAY ™ WIRELESS Wireless portable hi-fi speaker for iPad, iPhone and iPod Owner’s Manual TM
. 3. 4. 5. 6. 7. 8. 9. 10. 11. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not1.use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
HARMAN KARDON Welcome GO + PLAY WIRELESS Welcome Package Contents Thank you for purchasing the Harman Kardon Go + Play™ Wireless portable hi-fi speaker for iPhone/iPod and iPad. This system has been designed to meet the highest audio-performance standards, and features HARMAN TrueStream, which guarantees peak wireless sound and clarity. The Harman Kardon Go + Play Wireless system will meet all your listening and travel needs, allowing you to immerse yourself in your favorite music wherever you are.
HARMAN KARDON GO + PLAY WIRELESS General Setup Battery Installation 1. Connect the power supply into the “DC In” jack. 2. Plug the adapter into the wall outlet. 3. If you prefer to use batteries, install eight (8) type D batteries into the bottom of the unit. 4. Press the Power button. The Status LED will illuminate white. 5. When Go+Play Wireless is on, press the Power button to put it into the standby mode; when it is in standby, press the Power button to turn it on.
Bluetooth Pairing and Technical Specifications HARMAN KARDON GO + PLAY WIRELESS Listening to Audio from a Bluetooth-Capable Device Technical Specifications 1. Press the Harman Kardon Go + Play Wireless’s “Power” button. The Status LED will illuminate white. 2. The Harman Kardon Go + Play Wireless unit will automatically enter the Bluetooth pairing mode. 3. Perform a new device search on your Bluetooth-capable device. 4. Select “GO+PLAY WIRELESS” on the device’s pairing list.
HARMAN KARDON Troubleshooting Symptom English GO + PLAY WIRELESS Possible Problem Solution Note There is no sound coming from the Harman Kardon Go + Play Wireless unit. No power to unit. Make sure that the wall outlet or power strip has power. Make sure that all switches for outlet/power strip are on and that all switches for the unit are on. If you are not using the AC adapter, make sure that fresh batteries are installed correctly.
CE1588 HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) www.harmankardon.com Made in P.R.C. ©2012 HARMAN International Industries, Incorporated. All rights reserved. Tous droits réservés. Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Harman Kardon Go + Play is a trademark of Harman International Industries, Incorporated.