MirrorLink™ (TYPE A/B ONLY) MirrorLink™ (TYPE A/B ONLY) MirrorLink™ XControl X panel The MirrorLinkTM function allows smartphone content to be operated via the system. To use the MirrorLinkTM application, connect your Android device to the USB port. Depending on differences between models or software version etc., some models might be incompatible with this system. When using the application, read the precautions indicated in “BEFORE USING THE APPLICATION”. (→P.
MirrorLink™ (TYPE A/B ONLY) XControl X screen ABOUT THE SUPPORTED DEVICES ●● Your smartphone must support the MirrorLinkTM version 1.2, 1.1, 1.0 function. ●● Available operations will differ depending on your smartphone. Refer to your smartphone owner’s manual, or consult the manufacturer. 5 APPS *: The displayed screen will differ depending on the connected smartphone. No. Function Displays software buttons that function as the buttons on the smartphone.
ahaTM by HARMAN ahaTM by HARMAN ahaTM by HARMAN aha is a cloud-based application that connects to the system and gives you access to your favorite web content safely and easily. There are over 40,000 stations spanning internet radio, personalized music, audiobooks, Facebook, Twitter, restaurant and hotel searches, weather and more. For more about aha, go to the aha site (http://www.aharadio.com).
ahaTM by HARMAN XControl X screen XControl X panel No. 5 Function Press to display the “Apps (Apps)” screen. Turn to display the next/previous content item. Press to select an audio mode. Press to display the next/previous content item. No. APPS Turn to adjust volume. Press and hold to turn the audio system on/off. Function Displays station name. Displays cover art. Select to display the browse screen. Select to display the station list screen.
ahaTM by HARMAN No. Function Top screen operation buttons. • Content items can be changed, and if content items contain information, calls can be placed and content items can be set* for destinations, etc. Select to upload “Dislike” information to the application server. To cancel “Dislike” information that is being uploaded to the server, select this button again. Select to upload “Like” information to the application server.
ahaTM by HARMAN ABOUT THE SUPPORTED DEVICES FOR aha This system supports the following devices. ●● iPhone: iOS 5.0 or later ●● Android: Android2.2 or later NOTE llNote that the warranty does not apply if an unsupported iPhone is connected. llThe available functions may vary depending on the type of Android device.
Pandora® Pandora® Pandora® Pandora is free personalized radio that offers effortless and endless music enjoyment and discovery. To use the Pandora application, connect your iPhone to the USB port, or connect your Android device via Bluetooth. Depending on differences between models or software version etc., some models might be incompatible with this system. This function is not available if the Pandora application has not been installed on the smartphone.
Pandora® XControl X panel No. 5 Function APPS Turn to adjust volume. Press and hold to turn the audio system on/off. Press to display the “Apps (Apps)” screen. Press to select an audio mode. Press to skip to the next track. Select and hold to rate the track currently playing as “Like” or “Dislike”.
Pandora® XControl X screen No. Function Shows progress. Select to pause/play. Select to rate the track currently playing as “Like” or “Dislike”. ABOUT THE SUPPORTED DEVICES This system supports the following devices. ●● iPhone: iOS 5.0 or later ●● Android: Differs with mobile device used No. Function Displays cover art. Select to display the station list screen. Select to create a station from artist or track. Select to bookmark the track currently playing. Select to skip to the next track.
Apple Carplay Apple Carplay Apple Carplay CarPlay can be used to view iPhone maps, play music, and place calls by connecting your iPhone to the system. Supported applications can also be run. ●● For details on the services or the operations, check the Apple Carplay site (https://ssl.apple.com/ios/carplay/). To use the Apple Carplay application, connect your iPhone to the USB port, or via Wi-Fi®*.
Apple Carplay XControl X screen XControl X panel *: The displayed screen will differ depending on the connected iPhone. No. No. Function Turn to adjust volume. Press and hold to turn the audio system on/off. Press to display the “Apps (Apps)” screen. Function Displays the application buttons. Select to start the application. Select to display the home screen of Apple Carplay. ABOUT THE SUPPORTED DEVICES This system supports the following devices.
Android Auto Android Auto Android Auto Android Auto can be used to view Android maps, play music, and place calls by connecting your Android terminal to the system. Supported applications can also be run. ●● For details on the services or the operations, check the Android Auto site (https://www.android.com/auto/) and (https://support.google.com/androidauto/). To use the Android Auto application, connect your Android device to the USB port, or via Wi-Fi®*.
Android Auto XControl X screen XControl X panel No. No. Function Turn to adjust volume. Press and hold to turn the audio system on/off. Press to display the “Apps (Apps)” screen. 108 Function Displays the application/information buttons. Select to start the application, or select to display information. ABOUT THE SUPPORTED DEVICES This system supports the following devices.
TravelLink (TYPE A/B ONLY) TravelLink (TYPE A/B ONLY) TravelLink* 3. Check that sports information is displayed. *: SiriusXM U.S. satellite and data services are available only in the 48 contiguous USA and DC. SiriusXM satellite service is also available in Canada; see www.siriusxm.ca. Data service information, which is comprised of sports information, weather information, stock information and fuel information, can be received via the SiriusXM® Radio.
TravelLink (TYPE A/B ONLY) DISPLAYING WEATHER INFORMATION No. Select to switch the timing of the displayed forecast. Weather forecasts, forecast temperature or highest/lowest temperature, and the chances of precipitation, etc. can be displayed in weather information. 1. 2. 3. Function Select to display ski area facility information such as the current air temperature, wind and snow conditions, and the amount of snowfall. Select TravelLink (TravelLink) on the “Apps (Apps)” screen (→P.28).
TravelLink (TYPE A/B ONLY) 3. Check that stock information is displayed. 1. 2. 3. Select TravelLink (TravelLink) on the “Apps (Apps)” screen (→P.28). Select Fuel Prices (Fuel Prices). Check that fuel information is displayed. XType X A only No. Function Stocks information are displayed. Select to add or edit stocks. 5 XType X B only APPS NOTE llUp to XX stocks can be registered.
TravelLink (TYPE A/B ONLY) No. Function Select to sort gas station by brand. Gas station information are displayed. Select to set the fuel type. *2 Select to change the location in which fuel information is displayed. *1: Type A only *2: Type B only NOTE llUp to 25 gas stations can be displayed. llThe distance from the current position are displayed only when the system is equipped with the navigation function.
6 6 AUDIO 113
BASIC OPERATION BASIC OPERATION SOME BASICS TURNING THE SYSTEM ON AND OFF This section describes some of the basic features of the audio system. Some information may not pertain to your system. Your audio system works when the ignition switch is turned to the “ACC” or “ON” position. CAUTION llTo prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. “ ” knob: Press and hold to turn the audio system on and off.
BASIC OPERATION SELECTING AN AUDIO SOURCE 1. Press or X“Media X (Media)” screen . ●● Each time or source can also be changed. is pressed, the audio AUDIO 2. Select the desired audio source.
BASIC OPERATION 5. SOUND SETTINGS Set the desired item. The following sound quality can be adjusted. TONE: How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal programs usually sound better with different mixes of treble, mid and bass. BALANCE: No. Select the icon to adjust sound balance. A good balance of the left and right stereo channels and of the front and rear sound levels is also important.
BASIC OPERATION VOICE RECOGNITION SYSTEM 1. Press this switch to operate the voice recognition system. its list AUDIO ●● The voice recognition system and commands can be operated. (→P.
RADIO OPERATION RADIO OPERATION AM/FM RADIO No. Function Turn to step up/down frequencies. OVERVIEW The FM/AM radio operation screen can be reached by selecting FM (FM) or AM (AM) on the “Radio (Radio)” screen. (→P.115) Press to seek up/down available stations/channels. Press and hold for continuous seek. XControl X screen XControl X panel No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. 118 No.
RADIO OPERATION No. Function Select to scan for receivable stations/channels. Select to display the cache radio operation buttons. (→P.122) * Select to turn HD Radio mode on/off. * Select to change multicast channels available. (→P.121) PRESETTING A STATION Radio mode has a mix preset function, which can store up to 18 stations from any of the AM, FM or SiriusXM Satellite* Radio bands. *: Type A/B only 1. 2. Tune in the desired station. Select and hold one of the desired preset station button.
RADIO OPERATION AVAILABLE HD Radio™ TECHNOLOGY (TYPE A/B ONLY) HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. HD Radio™ Technology is the digital evolution of analog AM/FM radio. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives.
RADIO OPERATION MULTICAST On the FM radio frequency most digital stations have “multiple” or supplemental programs on one FM station. 1. Select . ●● Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. ●● FM stations can provide additional digital-only audio programming on HD2/HD3 Channels. NOTE ●● Each time changed.
RADIO OPERATION CACHING RADIO PROGRAMS ●● Program Service Data: Presents song name, artist, station IDs, and other relevant data streams. A radio program can be cached and played back in a timeshifted manner. AUTOMATIC PLAYBACK OF THE CACHE ●● Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content.
RADIO OPERATION PLAYING BACK THE CACHE MANUALLY No. Returns to the live radio broadcast. The broadcast cached in the program cache can be played back manually. 1. 2. Select Information/Function Select: Skips forward 2 minutes. Select and hold: Fast forwards continuously. (Replay). (→P.118) Pauses or plays the radio broadcast. Select the desired cache radio operation button. Select: Skips backward 2 minutes. Select and hold: Fast rewinds continuously. Exits cached playback.
RADIO OPERATION SiriusXM® Satellite Radio (TYPE A/B ONLY) OVERVIEW No. Function Press to seek up/down available channels. Press and hold for continuous seek. XControl X screen The SiriusXM® operation screen can be reached by selecting (sxm) on the “Radio (Radio)” screen. (→P.115) XControl X panel No. No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to step up/down channels. 124 Function Select to change radio modes.
RADIO OPERATION No. Function Select to search subscribed channels by category. When Tune Start is set to on, Tune Scan (Tune Scan) will be displayed. (→P.131) Select to display the cache radio operation buttons. (→P.129) Select to search channels by entering the channel number. Select to tune to preset stations/channels. To listen to a satellite radio broadcast in the vehicle, a subscription to the SiriusXM® Satellite Radio service is necessary.
RADIO OPERATION HOW TO SUBSCRIBE It is necessary to enter into a separate service agreement with SiriusXM® Satellite Radio Services in order to receive satellite broadcast programming in the vehicle. Additional activation and service subscription fees apply that are not included in the purchase price of the vehicle and digital satellite tuner. ●● For complete information on subscription rates and terms, or to subscribe to SiriusXM® Satellite Radio: XU.S.A. X Refer to www.siriusxm.
RADIO OPERATION CAUTION llIt is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any technology or software incorporated in receivers compatible with the SiriusXM® Satellite Radio Services or that support the SiriusXM website, the Online Service or any of its content.
RADIO OPERATION NOTE llSiriusXM® Satellite Radio Service is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the SiriusXM Satellite Radio customer service agreement. llCustomers should have their radio ID ready; the radio ID can be found by tuning to “Ch 000” on the radio. For details, see “DISPLAYING THE RADIO ID” below.
RADIO OPERATION CACHING RADIO PROGRAMS 2. Select the desired cache radio operation button. A radio program can be cached and played back in a timeshifted manner. The program that is currently being listened to, and channel programs registered as Smart Favorites can be cached. NOTE PLAYING BACK THE CACHE AUDIO llIf noise or silence occurs during the caching process, cachewriting will continue, with the noise or silence recorded as is.
RADIO OPERATION No. Information/Function Pauses or plays the radio broadcast. Select: Access the desired program. Skips back through program. Select and hold: Fast rewinds continuously. The fast rewind speed increased the longer the button is held down. Exits cached playback. NOTE llThe time displayed on the bar scale may differ from the actual time. REGISTERING A SMART FAVORITE CHANNEL The TuneStart and TuneScan functions can be used by registering preset channels as Smart Favorites.
RADIO OPERATION TuneScanTM FUNCTION TuneScan is a function used to listen to the first 10 seconds of all recorded programs one after another. TuneScan is applicable to channels registered in Smart Favorites, and programs that are currently being listened to. (→P.130) It is necessary to turn on TuneStart to use this function. (→P.66) Select Tune Scan (Tune Scan). ●● Select Tune Scan (Tune Scan) again when the desired program is reached to continue playing that program.
RADIO OPERATION No. Function Page Select to display the all channels list. - Select to display the preset channels list. - Select to display channel categories and Featured Favorite channel list. 132 Select to display the sports channels list. 132 SELECTING FROM THE SPORTS CHANNELS LIST 1. SELECTING FROM CATEGORIES AND FEATURED FAVORITE CHANNEL LIST 1. Select (Category). Select (GameZone). ●● The teams which is being broadcast at present or the registered team are displayed on the list.
RADIO OPERATION 3. Select the desired sports. 4. Select the desired team. 3. Select the desired item to be set. ●● : Select to delete the item. ●● : Drag an item to the desired position. Pop up alerts can be set to display on the screen. 1. nnEDITING THE LIST 1. 2. 2. 3. Select (Edit Teams) on the “Game Zone (Game Zone)” screen. (→P.132) Select next to the desired item. Select the desired item, and then select Save (Save). Select (Edit Teams) on the “Game Zone (Game Zone)” screen. (→P.
MEDIA OPERATION MEDIA OPERATION CD (TYPE A/B ONLY) The CD operation screen can be reached by the following methods: ●● Insert a disc. (→P.38) ●● Select Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. OVERVIEW XControl X panel No. on the “Media (Media)” screen. (→P.115) Press to eject a disc. Disc slot Turn to select a track. Press and hold to display the sound setting screen. (→P.116) Press to select a track.
MEDIA OPERATION XControl X screen No. Function XAudio X CD Select to display a track list. XMP3/WMA/AAC X disc Select to display the play mode selection screen. • “Artists (Artists)”/“Albums (Albums)”/“Songs (Songs)”/“Playlists (Playlists)”/“Genres (Genres)”/“Composers (Composers)”/“Folders (Folders)”are on the play mode selection screen. • If audio files contain information such as the artist (Search name and album name, select OO) in each play mode to search by play mode name.
MEDIA OPERATION NOTE llIf a disc contains CD-DA files and MP3/WMA/AAC files, only the CD-DA files can be played back. llIf a CD-TEXT disc is inserted, the title of the disc and track will be displayed. Up to 32 characters can be displayed. llIf the disc contains no CD-TEXT, only the track number would be displayed on the screen. USB MEMORY Audio files on the USB memory can be played back. OVERVIEW The USB Audio playback screen can be reached by the following methods: ●● Connect a USB memory. (→P.
MEDIA OPERATION XControl X panel AUDIO No. XControl X screen Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to select a track. Press and hold to display the sound setting screen. (→P.116) Press to select a track. Press and hold to fast forward/rewind. Press to switch between media sources. 6 No. Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen.
MEDIA OPERATION No. Function Shows progress. The playback location can be changed by dragging the sliders. Select to enable/disable repeat playback of the track currently playing. Select to select a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing from the USB memory. WARNING llDo not operate the player’s controls or connect the USB memory while driving. CAUTION llDo not leave your portable player in the car.
MEDIA OPERATION iPod XControl X panel When an iPod is connected, you can play iPod music files. On this unit, you can perform operations such as selecting a file from a list or changing to the random playback mode. OVERVIEW The iPod operation screen can be reached by the following methods: ●● Connect an iPod. (→P.39) on the “Media (Media)” screen. (→P.115) No. AUDIO ●● Select Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off.
MEDIA OPERATION XControl X screen No. Function Shows progress. The playback location can be changed by dragging the sliders. Select to enable/disable repeat playback of the track currently playing. Select to select a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing on the iPod. No. Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen.
MEDIA OPERATION CAUTION llDo not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player. llDo not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. llDo not insert foreign objects into the port as this may damage the portable player or its terminal.
MEDIA OPERATION XControl X screen XControl X panel No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to select a track. Press and hold to display the sound setting screen. (→P.116) Press to select a track. Press and hold to fast forward/rewind. Press to switch between media sources. 142 No. Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen.
MEDIA OPERATION No. Function Select to display the “Change Device (Change Device)” screen. (→P.144) Shows progress. The playback location can be changed by dragging the sliders. Select to enable/disable repeat playback of the track currently playing. Select to select a track. Select and hold to fast forward/rewind. Select to enable/disable random playback for the tracks currently playing on the Bluetooth audio device.
MEDIA OPERATION NOTE llDepending on the Bluetooth device that is connected to the system, the music may start playing when selecting while it is paused. Conversely, the music may pause when selecting while it is playing. llIn the following conditions, the system may not function: • The Bluetooth device is turned off. • The Bluetooth device is not connected. • The Bluetooth device has a low battery. llIt may take time to connect the phone when Bluetooth audio is being played.
MEDIA OPERATION AUX No. Function Press to switch between media sources. OVERVIEW The AUX operation screen can be reached by the following methods: XControl X screen ●● Connect a portable audio device. (→P.39) ●● Select on the “Media (Media)” screen. (→P.115) XControl X panel AUDIO 6 No. No. Function Function Select to switch between other media sources. Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off.
MEDIA OPERATION WARNING llDo not operate the player’s controls or connect the portable audio device while driving. CAUTION llDo not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player. llDo not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal.
AUDIO REMOTE CONTROLS AUDIO REMOTE CONTROLS STEERING SWITCHES X“VOL X +/VOL -” switch Mode Some parts of the audio system can be adjusted using the switches on the steering wheel. Operation Function Press Volume up/down Press and hold Volume up/down continuously Volume X“ X / ” switch Mode No.
AUDIO REMOTE CONTROLS Mode Operation Function Press Track up (“ Press and hold Thumbs up/down ”only) Pandora*2 1 * : Type A/B only *2: Pandora is available in the United States, Australia, and New Zealand. X“Source” X switch Mode All Operation Press Function Change audio modes NOTE llIn the aha, Pandora*1 and SUBARU STARLINK*2 mode, some operation may be done on the screen depend on the selected APPS. *1: Pandora is available in the United States, Australia, and New Zealand.
TIPS FOR OPERATING THE AUDIO SYSTEM TIPS FOR OPERATING THE AUDIO SYSTEM OPERATING INFORMATION CAUTION llTo avoid damage to the audio system: • Be careful not to spill beverages over the audio system. • Type A/B only: Do not put anything other than an appropriate disc into the disc slot. llThe use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction.
TIPS FOR OPERATING THE AUDIO SYSTEM FM AM Fading and drifting stations: Generally, the effective range of FM is about 25 miles (40 km). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by distortion. Fading: AM broadcasts are reflected by the upper atmosphere — especially at night.
TIPS FOR OPERATING THE AUDIO SYSTEM CD PLAYER AND DISC (TYPE A/B ONLY) ●● Extremely high temperatures can keep the CD player from working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player. ●● Bumpy roads or other vibrations may make the CD player skip. ●● If moisture gets into the CD player, the discs may not be able to be played. Remove the discs from the player and wait until it dries. ●● Use only discs marked as shown above.
TIPS FOR OPERATING THE AUDIO SYSTEM XLow X quality discs CAUTION llDo not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. llThis system is not designed for use of Dual Discs. Do not use Dual Discs because they may cause damage to the player. llDo not use discs with a protection ring.
TIPS FOR OPERATING THE AUDIO SYSTEM ●● Dirt, scratches, warping, pin holes or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) ●● Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight.
TIPS FOR OPERATING THE AUDIO SYSTEM ●● iPod nano (7th generation) USB MEMORY ●● iPod nano (6th generation) ●● USB communication formats: USB 2.
TIPS FOR OPERATING THE AUDIO SYSTEM CORRESPONDING BIT RATES FILE INFORMATION COMPATIBLE COMPRESSED FILES Item Compatible file format File type USB DISC* MP3/WMA/AAC Bit rate (kbps) MP3 files: MPEG 1 LAYER 3 32 - 320 MP3 files: MPEG 2 LSF LAYER 3 8 - 160 Maximum 3000 Maximum 192 WMA files: Ver. 7, 8 CBR 48 - 192 Files in the device Maximum 9999 Maximum 255 WMA files: Ver. 9 (9.1/9.
TIPS FOR OPERATING THE AUDIO SYSTEM ●● This system plays back files with .mp3/.wma/.m4a file extensions as MP3/WMA/AAC files respectively. To prevent noise and playback errors, use the appropriate file extension. ●● When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or rewind operations are used. ●● This system can play only the first session when using multi-session compatible CDs.
TIPS FOR OPERATING THE AUDIO SYSTEM TERMS PACKET WRITE ●● This is a general term that describes the process of writing data on-demand to CD-R, etc., in the same way that data is written to floppy or hard discs. ID3 TAG WMA TAG ●● WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title and artist name. ●● This is the international standard for the formatting of CD-ROM folders and files.
TIPS FOR OPERATING THE AUDIO SYSTEM WMA ●● WMA (Windows Media Audio) is an audio compression format developed by Microsoft®. It compresses files into a size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8 and 9. ●● This product is protected by certain intellectual property rights of Microsoft Corporation and third parties.
7 7 NAVIGATION SYSTEM (TYPE A ONLY) 159
BASIC OPERATION BASIC OPERATION MAP SCREEN No. MAP SCREEN OVERVIEW The map screen can be reached by the following methods: ●● Press . ●● Press , and then select (Map). Information/Function Page Select to change the map display mode between 2D north-up, 2D heading-up or 3D. In 3D map, only a heading-up view is available. 163 Displays the current vehicle position. - Displays the speed limit of the road currently being travelled on. - Displays the current street name.
BASIC OPERATION MAP SCREEN BUTTONS OVERVIEW No. The map screen buttons can be reached by selecting any point on the map. Function Page Select to search for gas stations. When driving on the highway during route guidance, select to search for gas stations, restaurants or rest areas near the next three highway exits. 173 Select to change the map scale. 162 NAVIGATION SYSTEM 7 No. Function Select to set the display of the traffic information on/off. Select to mute/unmute the voice guidance.
BASIC OPERATION MAP SCREEN OPERATION CURRENT POSITION DISPLAY 1. Press . ●● After the map operation, displayed. Select previous screen. (Resume) may be (Resume) to return to the NOTE llWhile driving, the current position mark is fixed on the screen and the map moves. llThe current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS.
BASIC OPERATION X2D X heading-up NOTE llThe scale of the map screen can also be changed by selecting double touch or pinch operation. (→P.40) ORIENTATION OF THE MAP The orientation of the map can be changed between 2D north-up, 2D heading-up and 3D. Select , or . ●● Each time the symbol is selected, the orientation of the map is changes. ●● The direction of vehicle travel is always up. NAVIGATION SYSTEM 1. X3D X heading-up X2D X north-up ●● The direction of vehicle travel is always up.
BASIC OPERATION MAP SCREEN INFORMATION POI ICONS Points of Interest such as gas stations and restaurants can be displayed on the map screen. Their location can also be set as a destination. TRAFFIC INFORMATION Road sections affected by traffic conditions are displayed in a different color on the map, and a small icon representing the type of traffic condition is displayed above the road. ●● The display of the traffic information can be set on/off. (→P.
BASIC OPERATION OTHER INFORMATION A pop up window will be displayed according to the driving situation, etc. XPeriodic X rest notification When you have been driving for a long time, a warning message will pop up on the screen. XLow X fuel warning When the fuel level is low, a warning message will pop up on the screen. ●● (Search): Select to search for rest areas. (Ignore): Select to delete the message. XSevere X weather warning ●● (Search): Select to search for gas stations. (→P.
BASIC OPERATION MEMORY POINTS 3. Select the desired item to be registered to. REGISTERING MEMORY POINTS The desired point can be registered as home, work or favorite. The registered points can be set as a destination. REGISTERING THE CURRENT POINT 1. 2. Select the current street name. Select Save (Save). 4. Select OK (OK). ●● The point is registered in the favorite places list. (→P.173) ●● The icons are displayed on the map.
BASIC OPERATION REGISTERING FROM THE MAP 1. 2. Select and hold the desired point on the map or POI icon. Select 1. 2. Select Menu (Menu). Select (Find POI) or (Recent). . is changed to (yellow), and the point is registered in the favorite places list. 3. 4. Select NAVIGATION SYSTEM ●● EDITING MEMORY POINTS (Favorite). Select Edit (Edit). ●● Each time the symbol is selected, the symbol changes between and (yellow). 7 ●● : Select to edit the address. (→P.
BASIC OPERATION EDITING HOME OR WORK 1. 2. 3. 4. Select NOTE next to “Home (Home)” or “Work (Work)”. Enter an address, and then select (Search). Select the desired item from the list, and then select Save (Save). Select (Confirm). NOTE llHome and work can also be edited from the route options screen (→P.176) and the navigation settings screen (→P.183). DELETING FAVORITE 1. 2. Select next to the desired item to be deleted. Select Delete (Delete). ●● (Delete All): Select to delete all items.
DESTINATION SEARCH DESTINATION SEARCH SEARCH OPERATION SETTING HOME OR WORK AS THE DESTINATION There are several ways to search for a destination. Function Page 169 Searching on the map. 170 Searching by entering a search word. 170 Searching by POIs. 171 Searching from previously set destinations. 172 Searching from the favorite places list. 173 Searching for gas stations. 173 Searching by phonebook. 81 Select or .
DESTINATION SEARCH SEARCHING ON THE MAP 1. 2. Select and hold the desired point on the map or select POI icon. Select 170 The destination can be set by entering a search word, for example an address or a facility name, etc. 1. 2. ●● 3. (GO). SEARCHING BY ENTERING A SEARCH WORD Select Menu (Menu). Select (Search). : Select to search for a destination around the point. Check that the route calculation screen is displayed. (→P.174) 3. Enter the word, and then select (Search).
DESTINATION SEARCH No. * Function Select to set the radius filter. Once the radius filter has been set, only item within the radius will be searched. Each time the button is selected, the radius filter changes between “Along Route (Along Route)”, “Near Destination (Near Destination)” and “Near Me (Near Me)”. SEARCHING BY POIs 1. 2. Select Menu (Menu). Select (Find POI). NAVIGATION SYSTEM Some candidate destinations are displayed based the input characters.
DESTINATION SEARCH 4. Select the desired item from the list, and then select (GO). ●● 5. : Select to call the registered phone number. ●● : Select to open/close the list. Check that the route calculation screen is displayed. (→P.174) SEARCHING FROM PREVIOUSLY SET DESTINATIONS 1. 2. 172 Select Menu (Menu). Select (Recent). 3. 4. Select the desired item. Check that the route calculation screen is displayed. (→P.174) DELETING THE ITEM IN THE LIST 1. 2.
DESTINATION SEARCH 3. 4. ●● 5. (Delete All): Select to delete all items. ●● Cancel (Cancel): Select to cancel deleting. SEARCHING FROM THE FAVORITE PLACES LIST 1. 2. 3. Select Menu (Menu). Select (Find POI) or (Recent). Check that the route calculation screen is displayed. (→P.174) NOTE llTo use this function, it is necessary to register the entry. (→P.166) SEARCHING FOR GAS STATIONS 1. 2. Select Select the desired item. NAVIGATION SYSTEM Select Delete (Delete).
DESTINATION SEARCH ●● When driving on the highway during route guidance, gas stations, restaurants or rest areas near the next three highway exits can be selected. ROUTE CALCULATION ROUTE CALCULATION SCREEN After searching for the destination, the route calculation screen will be displayed. 3. 4. Select the desired item from the list, and then select (GO). ●● : Select to call the registered phone number. Check that the route calculation screen is displayed. (→P.174) No.
DESTINATION SEARCH No. Information/Function Select the one of the three recommended routes. • Blue: The fastest route • Yellow: The shortest route • Red: An ecological route llThe route for returning may not be the same as that for going. llThe route guidance to the destination may not be the shortest route or a route without traffic congestion. llRoute guidance may not be available if there is no road data for the specified location.
DESTINATION SEARCH ROUTE OPTIONS SCREEN 1. 2. Select No. Function Select to set the screen mode. “Auto (Auto)”: Select to change the screen to day or night mode depending on the position of the headlight switch. “Day (Day)”: Select to always display the map in day mode. “Night (Night)”: Select to always display the map in night mode. on the route calculation screen. Select the desired item to be set. Select to register or edit the home address.
ROUTE GUIDANCE ROUTE GUIDANCE ROUTE GUIDANCE No. Information/Function Displays guidance route. ROUTE GUIDANCE SCREEN During the route guidance, various types of guidance screens can be displayed depending on conditions. Displays the distance, the estimated travel time to the destination, or the estimated arrival time at the destination. Select information box, and then select the desired information. Displays distance to the next turn with the arrow indicating the turn direction.
ROUTE GUIDANCE XLane X recommendation screen When approaching a turning point, the recommendation will be displayed automatically. lane STANDARD MAP ICON The following table shows the most frequently displayed route events. Icon Explanation Turn left Turn right When approaching a turning point, “Next (Next)” will be displayed automatically. U-turn left U-turn right Keep left at the fork in the road. Keep right at the fork in the road. Turn left & sharp curve. Turn right & sharp curve.
ROUTE GUIDANCE Icon Explanation Go left at the roundabout. Third exit (next change in direction). Join the roundabout (the route change after the next change). TYPICAL VOICE GUIDANCE PROMPTS As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the system’s voice guidance will provide various messages. Join the expressway. Leave the expressway. Disembark from the ferry. You are half way to your destination. You have arrived at your destination.
ROUTE GUIDANCE ROUTE RELATED FUNCTIONS CHECKING THE ROUTE 1. 2. 3. Select the next street name. (→P.177) Select (Turn List). Select the item to check the route. ADDING DESTINATIONS 1. 2. 3. Search for an additional destination in the same way as a destination search.(→P.169) Select (→P.174) Select ●● EDITING ROUTE 1. 2. (GO) on the route calculation screen. (Add Waypoint). (Replace Route): Select to replace the existing destination with a new one.
ROUTE GUIDANCE CHECKING THE ITINERARY 1. 2. 3. Select the next street name. (→P.177) Select (Itinerary). Select the item to check the itinerary. DELETING DESTINATIONS 1. 2. 3. Select Edit (Edit) on the “Itinerary (Itinerary)” screen. Select next to the desired item to be deleted. Select OK appears. (OK) when the confirmation screen ●● The route will be recalculated automatically. 1. 2. NAVIGATION SYSTEM STOPPING ROUTE GUIDANCE Select Menu (Menu). Select Cancel (Cancel).
ROUTE GUIDANCE REROUTING THE ROUTE When traffic information of the guidance route has been received, a pop-up window will be displayed to ask if you wish to reroute. WEATHER INFORMATION “At Destination (At Destination)” and “Along Route (Along Route)” weather information can be checked during route guidance using the TravelLink function. For details on TravelLink: →P.109 ●● (Reroute): Select to calculate the new route. ●● 182 (Ignore): Select to delete the message.
SETUP SETUP NAVIGATION SETTINGS 1. NAVIGATION SETTINGS SCREEN . NAVIGATION SYSTEM 2. 3. 4. Press Select Settings (Settings). Select (Navigation). 7 Select the desired item to be set.
SETUP No. Function Select to register or edit the home address. • When home has not been registered, (Add Home) is displayed. • For details on registering or editing the address: →P.168 No. Function Select to set the route type. Select to set the avoidance criteria for the route calculation. Select to set speed limit information on/off. Select to set the display of the junction view on/off. Select to set the screen mode.
TIPS FOR THE NAVIGATION SYSTEM TIPS FOR THE NAVIGATION SYSTEM GPS (GLOBAL POSITIONING SYSTEM) REGARDING ERRORS IN CURRENT POSITION DISPLAY LIMITATIONS OF THE NAVIGATION SYSTEM This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc. However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances.
TIPS FOR THE NAVIGATION SYSTEM CAUTION llThe installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. ●● Accurate current position may not be shown in the following cases: • When driving on a small angled Y-shaped road. • When driving on a winding road.
TIPS FOR THE NAVIGATION SYSTEM • If a location has multiple names and the system announces 1 or more of them. • When a route cannot be searched. • If the route to your destination includes gravel, unpaved roads or alleys, the route guidance may not be shown. • Your destination point might be shown on the opposite side of the street. • The road and map data stored in the navigation system may not be complete or may not be the latest version.
TIPS FOR THE NAVIGATION SYSTEM NAVIGATION DATABASE UPDATES Navigation database can be updated using a USB memory. For details, contact www.subaru.com. your SUBARU dealer or visit XFree X map update 1. 2. 3. Connect a USB memory containing the new navigation database files. Select (Install Now) to update. Select OK (OK). ●● If an error message appears, follow the guidance on the screen to try again. XPaid X map update 1. 2. 3. 4.
8 Siri/VOICE RECOGNITION SYSTEM 189 8
Siri Siri Siri® NOTE Siri is a function that allows your iPhone and iPod touch to be used without any manual operation by connecting your device to the unit. llAvailable operations will differ based on your iPhone and iPod touch. llBe careful not to exceed the data usage limits for your iPhone and iPod touch. Doing so will result in additional data usage charges from your phone carrier. To use Siri, connect your device via Bluetooth.
Siri MICROPHONE directly into the Siri OPERATION 1. 2. Press and hold the talk switch. Speak when you hear the beep sound. ●● If required to say more, the system will notify you with the beep sound. Continue speaking. ●● If the system fails to recognize what is being said, or to request a different operation, press the talk switch.
Siri ABOUT THE SUPPORTED DEVICES FOR Siri This system supports the following devices.
VOICE RECOGNITION SYSTEM OPERATION VOICE RECOGNITION SYSTEM OPERATION VOICE RECOGNITION SYSTEM The voice recognition system enables the navigation, audio, hands-free systems, etc. to be operated using voice commands. ●● To cancel voice recognition, press and hold the talk switch or the source switch. MICROPHONE USING THE VOICE RECOGNITION SYSTEM STEERING SWITCH ●● It is unnecessary to speak directly microphone when giving a command.
VOICE RECOGNITION SYSTEM OPERATION NOTE 2. Say the command. llIn the following conditions, the system may not recognize the command properly and using voice commands may not be possible: • The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult for the system to recognize. • There is excessive background noise, such as wind noise. VOICE RECOGNITION SYSTEM OPERATION 1. Press the talk switch.
VOICE RECOGNITION SYSTEM OPERATION VOICE COMMAND EXAMPLE: SEARCH FOR A SONG 1. 2. Press the talk switch. Say “Play song ”. ●● If multiple matching items are found, a selection screen will be displayed. Say “” or select the number. The system then starts playing music. NOTE llType A/B only: The Gracenote database is only compatible with USB or iPod mode. llUSB memory or iPod must be connected to enable track searching and playback. (→P.
VOICE RECOGNITION SYSTEM OPERATION VOICE COMMAND EXAMPLE: DIAL NUMBER 1. 2. Press the talk switch. Say “Dial ”. ●● Say the phone number one digit at a time. For example, if the phone number is “4251231234”: Say “four two five one two three one two three four”. 3. When the confirmation screen appears, say “Yes”, select Yes (Yes), or press the switch on the steering wheel. ●● Try saying the complete number. If it is not recognized, however, numbers can be added, deleted, or changed.
VOICE RECOGNITION SYSTEM OPERATION COMMAND LIST XMain X commands Recognizable voice commands and their actions are shown below. ●● Frequently used commands are listed in the following tables. ●● The functions available may vary according to the system installed. ●● Voice recognition (→P.62) language can be changed.
VOICE RECOGNITION SYSTEM OPERATION XPhone X commands XNavigation X commands* *: Type A only Voice command Voice command Function Function Send a Text Message to [Name] [Phone Type] Send the preset message to the said contact name and phone type of the contact from the phonebook Call [Name] [Phone Type] Place a call to the said contact name and phone type of the contact from the phonebook Enter an Address Enables setting a destination by saying the address Enter Country Enables setting the count
VOICE RECOGNITION SYSTEM OPERATION XMedia X commands Voice command Voice command Function Function Show (Songs/ Albums/Artists/ Genres/Playlists/ Podcasts/ Audiobooks/ Composers) Displays the list of Songs/Albums/Artists/ Genres/Playlists/ Podcasts/Audiobooks/ Composers Plays the selected track Play Song [Song Name] Plays the selected song Play Album [Album Name] Plays tracks from the selected album Shuffle (On/Off) Turn shuffle on/off Play Artist [Artist Name] Plays tracks from the selected a
VOICE RECOGNITION SYSTEM OPERATION XClimate X commands* XRadio X commands *: Type A/B only Voice command Function Tune to [Frequency] (FM/AM) Switches to FM/AM and tunes to said frequency Station [FM Station Name] Switches to the spoken FM station Preset [Number] Switches to the preset channel Satellite Channel [Name or Channel Number]* Voice command Function Auto AC (On/Off) Switches on the Auto AC mode On/Off Max AC (On/Off) Switches on the Maximum AC mode On/ Off Fan (On/Off) Turns Fa
VOICE RECOGNITION SYSTEM OPERATION Voice command (Increase / Decrease) Temperature Function Increments/Decrements temperature Sets the Both temperature to Spoken Temperature (Increase / Decrease) Both Temperatures Increments/Decrements Both temperature XMore X commands Voice command Change Source to (AM/FM/USB/ iPod/ Bluetooth/ Auxiliary) Function Changes source to AM/FM/USB/ iPod/ Bluetooth/ Auxiliary Function Stocks*1 Changes screen to TravelLink Stock Prices Weather*1 Changes screen to Travel
MEMO 202
9 APPENDIX/WHAT TO DO IF/INDEX 203 9
MAP DATABASE INFORMATION AND UPDATES (TYPE A ONLY) MAP DATABASE INFORMATION AND UPDATES (TYPE A ONLY) 204
MAP DATABASE INFORMATION AND UPDATES (TYPE A ONLY) APPENDIX/WHAT TO DO IF/INDEX 9 205
MAP DATABASE INFORMATION AND UPDATES (TYPE A ONLY) 206
CERTIFICATION CERTIFICATION CERTIFICATION SiriusXM® Satellite Radio (TYPE A/B ONLY) SiriusXM DATA SERVICE (TYPE A/B ONLY) Neither SiriusXM nor Subaru is responsible for any errors or inaccuracies in the SiriusXM data services or its use in vehicle. XU.S.A. X ● FCC ID: 2AHPN-BE2819 ●● This device complies with part 15 of the FCC Rules.
CERTIFICATION XCanada X ● IC: 6434C-BE2819 ●● This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
CERTIFICATION XMéxico X Gracenote (TYPE A/B ONLY) ●● Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. ●● RCPFUFT14-1151 ●● Music and recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.
CERTIFICATION Bluetooth ●● The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Fujitsu Ten Limited is under license. Other trademarks and trade names are those of their respective owners.
CERTIFICATION iPod ●● Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. ●● MirrorLink Certified™, the Design Only™ Certification Logo, MirrorLink™ and the MirrorLink™ Logo are certification marks and trademarks of the Car Connectivity Consortium LLC. Unauthorized use is strictly prohibited.
HOW TO GET THE SOURCE CODE USING THE OPEN SOURCE HOW TO GET THE SOURCE CODE USING THE OPEN SOURCE This system implements software using the open source. For customers who would like to get the source code of the software, it is available by downloading it from the web site of Clarion, Co., Ltd. For details, refer to the following web site. http://www.clarion.com/us/en/support/index.
WHAT TO DO IF WHAT TO DO IF TROUBLESHOOTING RADIO OPERATION (TYPE A/B ONLY) Cause Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip. The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode. None, radio broadcast issue. A user can contact the radio station. Sound fades, blending in and out. Radio is shifting between analog and digital audio.
WHAT TO DO IF Experience No text information shown for the present selected frequency. 214 Cause Data service issue by the radio broadcaster. Action Broadcaster should be notified. Complete the form; www.ibiquity.com/automotive/report_radio_ station_experiences.
WHAT TO DO IF PHONE If there is a problem with the hands-free system or a Bluetooth device, first check the table below. XWhen X using the hands-free system with a Bluetooth device Page Symptom Likely cause Solution This system The connected device may not be a compatible Bluetooth cellular phone. For a list of specific devices which operation has been confirmed on this system. For USA customers, please visit www.subaru.com for details.
WHAT TO DO IF XWhen X registering/connecting a cellular phone Page Symptom A cellular phone cannot be registered. A Bluetooth connection cannot be made. Likely cause Solution Cellular phone This system An incorrect passcode was entered on the cellular phone. Enter the correct passcode on the cellular phone. * - The registration operation has not been completed on the cellular phone side. Complete the registration operation on the cellular phone (approve registration on the phone).
WHAT TO DO IF XWhen X using the phonebook Page Symptom Solution Cellular phone This system The profile version of the connected cellular phone may not be compatible with transferring phonebook data. For a list of specific devices which operation has been confirmed on this system. For USA customers, please visit www.subaru.com for details. Outside of the USA customers, contact your local dealer to arrange a demonstration in order to confirm whether or not the phone can be paired with the vehicle.
WHAT TO DO IF XIn X other situations Page Symptom Likely cause The cellular phone is not close enough to this system. Even though all conceivable measures have been taken, the symptom status does not change. The cellular phone is the most likely cause of the symptom. *: For details, refer to the owner’s manual that came with the cellular phone. 218 Solution Cellular phone This system Bring the cellular phone closer to this system.
ERROR MESSAGES ERROR MESSAGES If the following messages appear, check by referring to the cause and action below. Mode FM radio Cause Action “No stations available. (No stations available.)” Displayed when the FM radio signal is lost (while accessing). Try to receive the signal again in a location free from obstructions. “No HD Radio signal available. (No HD Radio signal available.)” The HD Radio reception is poor. Try to receive the signal again in a location free from obstructions.
ERROR MESSAGES Mode Message “Check Antenna (Check Antenna)” 220 Action The SiriusXM antenna is not connected. Check whether the SiriusXM antenna cable is attached securely. “Antenna Shorted (Antenna Shorted)” A short circuit occurs in the antenna or the surrounding antenna cable. See a SUBARU certified dealer for assistance. “No Signal (No Signal)” The SiriusXM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal.
ERROR MESSAGES Mode CD*1 Cause Action “No music files found. (No music files found.)” This indicates that no MP3/WMA/ AAC files are included in the disc. Insert a disc on which playable music data is recorded. “Check DISC (Check DISC)” It indicates that the disc is dirty, damaged, or it was inserted upside down. Clean the disc or insert it correctly. “DISC Error (DISC Error)” There is a trouble inside the system. Eject the disc. “No music files found. (No music files found.
ERROR MESSAGES Mode iPod Bluetooth Audio 222 Message Cause Action “No music files found. (No music files found.)” This indicates that there is no music data in the iPod. Connect a iPod in which playable music data is stored. “iPod Error. (iPod Error.)” • Playback failure or communication abnormality. • Because an over current was detected. • Connect a iPod correctly. (→P.39) • Stop using the device for a short time and then try again. “Please check the iPod firmware version.
ERROR MESSAGES Mode Message Action “Information acquisition error. (Information acquisition error.)” When not able to get the requested information. Please try again (Refresh etc.) later or reconnect it. “Poor wireless reception. (Poor wireless reception.)” When a communication error has been detected. Please try again in a better communications environment. “Entry not recognized. (Entry not recognized.)” When an invalid operation has been executed. Please try again (Refresh etc.
ERROR MESSAGES Mode aha 224 Message Cause Action “The content cannot be acquired. (The content cannot be acquired.)” • When not able to get the content information. • When not able to switch to the Top content when selecting . • Please try again (Refresh etc.) later or reconnect it. • Select the desired station again when the station list appears. “Action not available. (Action not available.)” When content-specific operations such as “fast forward” or “rewind” are not available.
ERROR MESSAGES Mode Cause Action “No stations have been added to your list. (No stations have been added to your list.)” When no stations have been registered. Please register stations. “Your ratings information was not saved. (Your ratings information was not saved.)” When ratings information has not been updated to the Pandora server. Please try again later. “Bookmark not saved. (Bookmark not saved.)” When bookmark registration information has not been updated to the Pandora server.
INDEX INDEX A D ahaTM by HARMAN..........................................................................98 AM radio........................................................................................ 118 Android Auto..................................................................................107 Apple Carplay................................................................................105 AUX...............................................................................................
INDEX P Initial screen....................................................................................34 iPod...............................................................................................139 Pandora.........................................................................................102 Phone settings.................................................................................56 M R Map data....................................................................................
INDEX S T Screen adjustment..........................................................................43 Adjusting brightness.................................................................... 43 Day and night mode.................................................................... 43 Search operation...........................................................................169 Favorite places list.....................................................................173 Gas stations.......................
