Uconnect™ ACCESS USER’S MANUAL CONTENTS • Identifying Your Radio . . . . . . . . . . . . . . . . . . . . .3 ▫ Uconnect™ 3.0 System. . . . . . . . . . . . . . . . . . .15 • Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . .6 ▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . .17 • Uconnect™ Access Overview . . . . . . . . . . . . . . .10 ▫ Media Mode . . . . . . . . . . . . . . . . . . . . . . . . . .19 ▫ How to Register with Uconnect™ Access: . . . . .10 • Uconnect™ 5.0 .
Uconnect™ ACCESS USER’S MANUAL ▫ More Main Menu . . . . . . . . . . . . . . . . . . . . . .40 • Uconnect™ 8.4AN . . . . . . . . . . . . . . . . . . . . . .158 • Uconnect™ 8.4A . . . . . . . . . . . . . . . . . . . . . . . .41 ▫ Uconnect™ 8.4AN System . . . . . . . . . . . . . . .158 ▫ Uconnect™ 8.4A System . . . . . . . . . . . . . . . . .41 ▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . .159 ▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . .42 ▫ Media Mode . . . . . .
Uconnect™ ACCESS USER’S MANUAL 3 Identifying Your Radio • SiriusXM™ Optional Uconnect™ 3.0 Uconnect™ 5.
Uconnect™ ACCESS USER’S MANUAL • Hands-free/Bluetooth® • 8.4” Touch-Screen • SiriusXM™ Optional • Navigation-Ready, see your dealer for details Uconnect™ 8.4A • Hands-free/Bluetooth® • Touchscreen Climate Controls • SiriusXM™ • Embedded Connectivity (US Market Only) Uconnect™ 8.4AN Key Features • 8.4” Touch-Screen • Navigation Standard Key Features NOTE: The 8.4A and 8.4AN appearance is the same, but the listed features provide the differences.
Uconnect™ ACCESS USER’S MANUAL 5 • SiriusXM™ • SiriusXM™ Traffic • Embedded Connectivity (US Market Only) 1
Uconnect™ ACCESS USER’S MANUAL Safety Guidelines WARNING! ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect™ features and applications in this vehicle. Only use Uconnect™ when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. • Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product.
Uconnect™ ACCESS USER’S MANUAL 7 • Driving is a complex activity that requires your full • Do not spray any liquid or caustic chemicals directly attention. If you’re engaged in driving or any activity on the screen! Use a clean and dry micro fiber lens 1 cleaning cloth in order to clean the touch screen. that requires your full attention, we recommend that you not use your system.
Uconnect™ ACCESS USER’S MANUAL FCC Declaration This device complies with Part 15 of the FCC Rules and RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by the radio manufacturer could void the user ’s authority to operate the equipment.
Uconnect™ ACCESS USER’S MANUAL 9 The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer be l i e ve s the internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Uconnect™ ACCESS USER’S MANUAL Uconnect™ Access Overview How to Register with Uconnect™ Access: Uconnect™ Access (Available on Uconnect™ 8.4A and Uconnect™ 8.4AN) 1. With the vehicle parked and the radio powered on, select the “Apps” soft-key located near the bottom of the radio touch screen. With Uconnect™ Access, owners have emergency and remote vehicle features available. These features include 2.
Uconnect™ ACCESS USER’S MANUAL 11 For additional registration assistance while in the vehicle, push the ASSIST button to contact Uconnect™ Customer Care. 1 Uconnect™ Access In-Vehicle Assistance Features With Uconnect™ Access, your vehicle has an on-board assistance feature located on the rear view mirror designed to enhance your driving experience if you should ever need assistance or support.
Uconnect™ ACCESS USER’S MANUAL 1. Roadside Assistance Call – If you get a flat tire, or need a tow, you’ll be connected to someone who can help anytime. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside Assistance. 2. Uconnect™ Customer Care – In-vehicle support for Uconnect™ Access System, Apps and Features. 3. Vehicle Customer Care – Total support for your Chrysler Group vehicle.
Uconnect™ ACCESS USER’S MANUAL 13 To use the Uconnect™ Features and Services, you must first register your vehicle with Uconnect™ Access. Please 1 refer to the “Register with Uconnect Access” section of Uconnect™ Access brings the power of the internet into your vehicle with exciting features, remote capabilities, this User’s Manual to start registration. Once registered, you can personalize your vehicle Uconnect™ System as theft alarm notification, and stolen vehicle assistance desired.
Uconnect™ ACCESS USER’S MANUAL Selling my Vehicle - How to Completely Remove My Uconnect™ Account To completely remove your Uconnect™ Account, simply log-in to your Uconnect™ Account and visit the Uconnect™ Store, click on My Apps, click on Settings, and then choose Remove Uconnect™ Account. In minutes your entire Uconnect™ Account and information will be removed from your vehicle. For further assistance call 855-792-4241, or go to the Mopar Owner Connect site at (www.MoparOwnerConnect.com).
Uconnect™ ACCESS USER’S MANUAL 15 Uconnect™ 3.0 Uconnect™ 3.0 System Press the RADIO hard-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. INFO Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text message broadcast from an FM station (FM mode only). 3. A-B-C Press the A-B-C hard-key to select the A, B or C preset list. 4.
Uconnect™ ACCESS USER’S MANUAL 5. SEEK UP Press the Seek Up soft-key to tune the radio to the next listenable station or channel. 6. BACK Press the BACK button to return to a previous menu or screen. Press the Seek Down soft-key to tune the radio to the previous listenable station or channel. 11. ON/VOLUME Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Press the MENU button allows to scroll between the setting sub-menus.
Uconnect™ ACCESS USER’S MANUAL 17 Pressing the MEDIA button will allow you to switch from • When the audio system is turned on, the sound will be set at the same volume level as last played. AM/FM modes to Media mode (CD, USB/iPOD, AUX, Bluetooth). Enter/Browse & Tune/Scroll Control Radio Mode • Turn the rotary TUNE/SCROLL control knob clockThe radio is equipped with the following modes: wise to increase or counterclockwise to decrease the radio station frequency.
Uconnect™ ACCESS USER’S MANUAL • Touch and release the Seek Down button to tune the SiriusXM™ Satellite Radio uses direct satellite-to-receiver radio to the next listenable station or channel. broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is Siri• During a Seek Down function, if the radio reaches the usXM™ Satellite Radio.
Uconnect™ ACCESS USER’S MANUAL 19 This functionality is only available for radios equipped Clock Setting with a Satellite receiver. In order to receive satellite radio, 1. Press the Menu button at the bottom of the radio, next the vehicle needs to be outside with a clear view to the select the Time Format setting and then select Set sky. Time. If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal. 2.
Uconnect™ ACCESS USER’S MANUAL Seek Up/Down Info Touch and release the right arrow soft-key for the next selection. Touch and release the left arrow soft-key to return to the beginning of the current selection, or return to the beginning of the previous selection if the Disc is within the first second of the current selection. Touch the Info soft-key to display the current track information. Touch the “X” soft-key to cancel this feature.
Uconnect™ ACCESS USER’S MANUAL 21 Inserting Compact Disc Eject Button – Ejecting a Disc Gently insert one Disc into the Disc player with the Disc label following the illustration indicated on the player. The Disc will automatically be pulled into the Disc player and the Disc icon will illuminate on the radio display. If a Disc does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new Disc can be loaded. Press the EJECT button to eject the Disc.
Uconnect™ ACCESS USER’S MANUAL display will show the track number, and index time in Gently insert the Auxiliary device cable into the AUX minutes and seconds. Play will begin at the start of track Port. If you insert a Auxiliary device with the ignition ON 1. and the radio ON, the unit will switch to AUX mode and begin to play when you insert the device cable.
Uconnect™ ACCESS USER’S MANUAL 23 Uconnect™ 5.0 Uconnect™ 5.0 System Press the RADIO hard-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. COMPASS Press the COMPASS hard-key to display the current direction of the vehicle. 3. SETTINGS Press the SETTINGS hard-key to access the Settings list. Clock, Display, Audio, Bluetooth and Sirius Settings are described in this manual. 4. MORE 1.
Uconnect™ ACCESS USER’S MANUAL Press the ENTER/BROWSE button to accept a high- 10. MEDIA lighted selection on the screen. Rotate the TUNE/ Pressing the MEDIA button will allow you to switch to SCROLL rotary knob to scroll through a list or tune a Media mode (CD, USB/iPOD, AUX, Bluetooth). radio station. Radio Mode 6. BACK The radio is equipped with the following modes: Press the BACK button to return to a previous menu or • FM screen. 7.
Uconnect™ ACCESS USER’S MANUAL 25 • Rotate the rotary knob to adjust the Volume. When the • During a Seek Up function, if the radio reaches the audio system is turned on, the sound will be set at the starting station after passing through the entire band two times, the radio will stop at the station where it same volume level as last played. began. • Press the Mute button to mute the system. Press the Fast Seek Up Mute button again to un-mute the system.
Uconnect™ ACCESS USER’S MANUAL • Touch and hold the Seek Down soft-key to advance the radio through the available stations or channel at a faster rate, the radio stops at the next available station or channel when the soft-key is released. SiriusXM™ Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear digital sound, coast to coast. The subscription service provider is SiriusXM™ Satellite Radio.
Uconnect™ ACCESS USER’S MANUAL 27 This functionality is only available for radios equipped • Touch the Equalizer soft-key to adjust the Bass, Mid and Treble. Use the + or - soft-key to adjust the with a Satellite receiver. In order to receive satellite radio, equalizer to your desired settings. Press the back the vehicle needs to be outside with a clear view to the arrow soft-key when done. sky.
Uconnect™ ACCESS USER’S MANUAL • Touch the Loudness soft-key to select the Loudness 2. Touch the Up or Down arrows to adjust the hours or minutes, next select the AM or PM soft-key. You can feature. When this feature is activated it improves sound quality at lower volumes. also select 12hr or 24hr format by touching the desires soft-key. Clock Setting There are two ways to enter the clock setting procedure 3. Once the time is set press the “Done” soft-key to exit the time screen. on the Uconnect™ 5.
Uconnect™ ACCESS USER’S MANUAL 29 to the beginning of the previous selection if the Disc is Shuffle within the first second of the current selection. Touch the shuffle soft-key to play the selections on the Fast Seek Up: Touch and hold the right arrow soft-key USB/iPod® device in random order to provide an interand the desired mode will begin to fast forward through esting change of pace. Touch the soft-key a second time to the current track until the soft-key is released. turn this feature off.
Uconnect™ ACCESS USER’S MANUAL Gently insert one Disc into the Disc player with the Disc label following the illustration indicated on the player. The Disc will automatically be pulled into the Disc player and the Disc icon will illuminate on the radio display. If a Disc does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new Disc can be loaded. Press the EJECT button to eject the Disc.
Uconnect™ ACCESS USER’S MANUAL 31 when you insert the device. The display will show the Gently insert the Auxiliary device cable into the AUX track number, and index time in minutes and seconds. Port. If you insert a Auxiliary device with the ignition ON, the unit will switch to AUX mode and begin to play Play will begin at the start of track 1. when you insert the device cable.
Uconnect™ ACCESS USER’S MANUAL Bluetooth® Streaming Audio (BTSA) or Bluetooth® Mode The Uconnect™ Phone allows you to dial a phone is entered by pairing a Bluetooth® device, containing number with your mobile phone using simple voice music, to the Uconnect™ Access system. commands. Before proceeding, the Bluetooth® device needs to be NOTE: paired through Uconnect™ Phone in order to communi• The Uconnect™ Phone requires a mobile phone cate with the Uconnect™ Access System.
Uconnect™ ACCESS USER’S MANUAL 33 Start Pairing Procedure • Press the “Phone” button to begin. • Wait for the “ready” prompt and BEEP. • (After the BEEP), say “Setup Phone Pairing”. • (After the BEEP), say “Pair a Phone”. • Follow the audible prompts. NOTE: For assistance in pairing your phone, contact Uconnect™ customer support at 1–877–855–8400 or visit www.UconnectPhone.com for phone compatibility, pairing instructions and details.
Uconnect™ ACCESS USER’S MANUAL names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth® Phones with Phone Book Access Profile may support this feature. See www.UconnectPhone.com for supported phones. downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use. • Only the phonebook of the currently connected mobile Download and update, if supported, begins as soon as phone is accessible.
Uconnect™ ACCESS USER’S MANUAL 35 Receiving A Call – Accept (And End) When an incoming call rings or is announced on Uconnect™, press the Phone button. To end a call, press the Phone button on steering wheel or the Phone soft-key on the radio screen. Mute (Or Unmute) Microphone During Call During a call, press the “Voice Command” button. (After the BEEP), say “mute” (or “mute off”). Transfer Ongoing Call Between Handset And Vehicle During a call, press the “Voice Command” button.
Uconnect™ ACCESS USER’S MANUAL Start a dialogue by pressing the “Voice Command” button , you will hear a beep. The beep is your signal to give a command. Below are a list of voice commands for each of the different modes. NOTE: To access the tutorial, press the “Voice Command” button . After the BEEP, say “tutorial”. Press any hard-key/button or touch the display (Touch-Screen radio) to cancel the tutorial.
Uconnect™ ACCESS USER’S MANUAL 37 Radio AM, Radio FM Modes SiriusXM™ Satellite Radio Mode Disc Mode “Frequency 97.1” (to change to radio station 97.
Uconnect™ ACCESS USER’S MANUAL USB Mode Bluetooth® Streaming (BT) Mode “Next Track” (to play the next track) “Previous Track” (to play the previous track) “Play” (to play a Artist Name, Playlist Name, Album Name, Track Name, etc.) “List” (to List a Artist, Playlist, Album, Track, etc.
Uconnect™ ACCESS USER’S MANUAL 39 • Doors & Locks — Refer to “Understanding Your Instrument Panel”, “Uconnect™ Access System” secPress the Settings hard-key to display the Settings Main tion in your vehicle Owner ’s Manual on the DVD for Menu. The Settings Main Menu contains the following details. options: Settings Main Menu • Display — Refer to “Understanding Your Instrument Panel”, “Uconnect™ Access System” section in your vehicle Owner ’s Manual on the DVD for details.
Uconnect™ ACCESS USER’S MANUAL • Phone/Bluetooth — Refer to the “Uconnect™ Phone” section in this manual for details. • Sirius Setup — Refer to the “Radio” section in this manual for details. More Main Menu Press the More hard-key to display the More Main Menu. The More Main Menu contains the following options: • Phone — Refer to the “Uconnect™ Phone” section in this manual for details.
Uconnect™ ACCESS USER’S MANUAL 41 Uconnect™ 8.4A Uconnect™ 8.4A System Touch the Radio soft-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. Media Touch the Media soft-key to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Climate Refer to Climate Controls in your vehicles Owner ’s Manual on the DVD for further details. 4. Nav (If Equipped) 1.
Uconnect™ ACCESS USER’S MANUAL Touch the Phone soft-key to access the Uconnect™ Phone Press the BACK button to return to a previous menu or feature. screen. 6. Apps 10. SCREEN OFF Touch the Apps soft-key to access Smartphone and Connected vehicle options. Press the SCREEN OFF hard-key to turn the touch-screen OFF. To turn the screen back ON, just touch the screen. 7. Settings 11. VOLUME & MUTE Touch the Settings soft-key to display the list of available Rotate the rotary knob to adjust the Volume.
Uconnect™ ACCESS USER’S MANUAL 43 Touch the RADIO Soft Key, bottom left corner, to enter Turn the rotary TUNE/SCROLL control knob clockwise the Radio Mode. The different tuner modes; AM, FM, and to increase or counterclockwise to decrease the radio SAT, can then, be selected by touching the corresponding station frequency. Push the ENTER/BROWSE button to soft-keys in the Radio mode. choose a selection.
Uconnect™ ACCESS USER’S MANUAL Up function, if the radio reaches the starting station after Touch and hold the Seek Down soft-key to advance the passing through the entire band two times, the radio will radio through the available stations or channel at a faster stop at the station where it began. rate, the radio stops at the next available station or channel when the soft-key is released.
Uconnect™ ACCESS USER’S MANUAL 45 When touched, the green GO soft key allows the you to You can switch between the two radio presets by touchcommit an entry, at which time the radio will tune to the ing the arrow soft key located in the upper right of the 1 entered station or channel and close the Direct Tune radio screen. Screen. Browse in AM/FM The selected Station or Channel number is displayed in When in either AM or FM, the Browse Screen provides a the Direct Tune text box.
Uconnect™ ACCESS USER’S MANUAL When selected, the radio tunes to the station stored in the Preset and returns to the main radio screen. Deleting Presets programming for children, directly from its satellites and broadcasting studios. A one-year SiriusXM™ Satellite Radio subscription is included. SiriusXM™ and all related marks and logos are trademarks of SiriusXM™ Radio Inc. and its subsidiaries.
Uconnect™ ACCESS USER’S MANUAL 47 If the screen shows Acquiring Signal, you might have to When in Satellite mode: change the vehicle’s position in order to receive a signal. • The SAT button is highlighted blue. In most cases, the satellite radio does not receive a signal • The SiriusXM™ Presets are displayed at the top of the in underground parking garages or tunnels. screen. No Subscription • The Genre is displayed below the Presets Bar.
Uconnect™ ACCESS USER’S MANUAL In addition to the tuning Operation functions common to Touch the Pause or Play soft-key to pause playing of the all Radio modes, the replay, Traffic/Weather Jump, and content at any time that the content is playing live or fav soft-key functions are available in SiriusXM™ Mode. rewound content. Play can be resumed again by touching of the Pause/Play soft-key.
Uconnect™ ACCESS USER’S MANUAL 49 Fav. Artist While the song is playing to set a Favorite Artist, touch the fav. soft-key and then the Fav. Artist 1 Touch the Live soft-key to resume playing of Live consoft-key. tent. Fav. Song While the song is playing to set a Favorite Favorites Song, touch the fav. soft-key and then the Fav Song Touch the fav. soft-key to activate the favorites menu, soft-key. which will time out in 5 seconds in absence of user Traffic & Weather interaction.
Uconnect™ ACCESS USER’S MANUAL Browse in SAT Genre Touch the browse soft-key to edit Presets, Favorites, Touch the Genre button to display a list of Genres. You Game Zone, and Jump settings, along with providing the can select any desired Genre by touching the Genre list, at SiriusXM™ Channel List. which point, the Radio tunes to a channel with the content in the selected Genre. This Screen contains many sub menus.
Uconnect™ ACCESS USER’S MANUAL 51 When selected, the Radio tunes to the station stored in Remove Favorites the Preset, and returns to the main Radio screen. Touch the Remove Favorites tab at the top of the screen. 1 Deleting a Preset Touch the Delete All soft-key to delete all of the Favorites or touch the Trash Can icon next to the Favorite to be A Preset can be deleted in the Presets Browse screen by deleted. touching the Trash Can Icon for the corresponding Preset.
Uconnect™ ACCESS USER’S MANUAL Touch the On-Air tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and touching any of the items in the list tunes the radio to that channel. Select Teams Touch the Alert Setting tab at the top of the screen.
Uconnect™ ACCESS USER’S MANUAL 53 Equalizer 1 Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade the audio between the Touch the Equalizer soft-key to activate the Equalizer rear and front speakers. screen. Touching the Front, Rear, Left, or Right soft-keys or touch Touch the + or - soft-keys, or by touching and dragging and drag the blue Speaker Icon to adjust the Balance/ over the level bar for each of the equalizer bands. The Fade.
Uconnect™ ACCESS USER’S MANUAL Speed Adjusted Volume audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise. Surround System (If Equipped) Touch the On soft-key to activate Surround Sound. Touch Off to deactivate this feature. When Surround Sound is On, you can hear audio coming from every direction as in a movie theatre or home theatre system.
Uconnect™ ACCESS USER’S MANUAL 55 A “No Disc” message will be displayed on the screen in which can be scrolled by touching the Up and Down the Disc mode when a Disc is not present in the Radio. soft-keys to the right. The Scroll/Tune knob can also be 1 used to scroll. Seek Up/Down Source Touch and release the right arrow soft-key for the next selection on the Disc.
Uconnect™ ACCESS USER’S MANUAL Touch the shuffle soft-key to play the selections on the compact disc in random order to provide an interesting change of pace. Touch the soft-key a second time to turn this feature off. USB/iPod® Mode is entered by either inserting a USB device or iPod® and cable into the USB Port or touch the iPod® soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select iPod®.
Uconnect™ ACCESS USER’S MANUAL 57 desired soft-key on the left side of the screen. The center Touch the shuffle soft-key to play the selections on the of the browse window shows items and it’s sub- USB/iPod® device in random order to provide an interfunctions, which can be scrolled by touching the Up and esting change of pace. Touch the soft-key a second time to Down soft-keys to the right. The Scroll/Tune knob can turn this feature off. also be used to scroll.
Uconnect™ ACCESS USER’S MANUAL Touching the trks soft-key while the pop up is displayed Controlling the Auxiliary Device will close the pop up. The control of the auxiliary device (e.g., selecting playAudio lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume Refer to Radio Mode for adjusting the audio settings. with the ON/OFF VOLUME rotary knob, or with the OPERATING INSTRUCTIONS – AUX MODE volume of the attached device.
Uconnect™ ACCESS USER’S MANUAL 59 Refer to Radio Mode for adjusting the audio settings. Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways 1 OPERATING INSTRUCTIONS – SD CARD you can browse through the contents of the SD Card. If MODE supported by the device, you can browse by Folders, Overview Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen.
Uconnect™ ACCESS USER’S MANUAL Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then press the ENTER/ BROWSE knob to start playing that track.
Uconnect™ ACCESS USER’S MANUAL 61 Before proceeding, the Bluetooth® device needs to be Touch the Source soft-key to select the desired audio paired through Uconnect™ Phone in order to communi- source, Disc, USB/iPod®, SD Card, AUX or Bluetooth® . This screen will time out after a few seconds and return cate with the Uconnect™ Access System. to the main radio screen if no selection is made. NOTE: See the pairing procedure in the Uconnect™ Phone section for more details.
Uconnect™ ACCESS USER’S MANUAL Uconnect™ Phone Uconnect Phone™ Overview • Calling Back the last incoming call number (“Call Back”). • Uconnect™ Phone is a voice-activated, hands-free, invehicle communications system. Uconnect™ Phone allows you to dial a phone number with your mobile phone. • Uconnect™ Phone supports the following features: Voice Activated Features: • Hands Free dialing via Voice (“Call John Smiths Mobile” or, “Dial 248 555-1212”).
Uconnect™ ACCESS USER’S MANUAL 63 • Sending a text message via the touch-screen. • Listen to Music on your Bluetootht Device via the touch-screen. • Pairing up to 10 phones/audio devices for easy access to connect to them quickly. NOTE: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone.
Uconnect™ ACCESS USER’S MANUAL the vehicle’s Uconnect™ Phone. The Uconnect™ Phone allows up to ten mobile phones or audio devices to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time. The system is available in English, Spanish, or French languages. The button is also used to access the Voice Commands for the Uconnect™ Voice Command features if your vehicle is equipped.
Uconnect™ ACCESS USER’S MANUAL 65 1. Say compound commands like “Call John Smith mobile”. 2. Say the individual commands and allow the system to guide you to complete the task. You will be prompted for a specific command and then guided through the available options. say each part of the command when you are asked for it.
Uconnect™ ACCESS USER’S MANUAL The system handles multiple inputs in the same phrase or sentence such as “make a phone call” and “to Kelly Smith”. For multiple inputs in the same phrase or sentence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who do you want to call?” in the case where a phone call was requested but the specific name was not recognized.
Uconnect™ ACCESS USER’S MANUAL 67 To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect™ website may also provide detailed instructions for pairing. NOTE: • You must have Bluetooth® enabled on your phone to complete this procedure. • The vehicle must be in PARK. 1. Press the “Phone” soft-key on the screen to begin.
Uconnect™ ACCESS USER’S MANUAL Pair Additional Mobile Phones • Touch the “Settings” soft-key from the Phone main screen, • Next, touch the “Phone/Bluetooth®” soft-key, • Search for available devices on your Bluetooth® enabled mobile phone.
Uconnect™ ACCESS USER’S MANUAL 69 • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device • Touch the “Player” or “Media” soft-key to begin, • Change the Source to Bluetooth®, • Uconnect™ Phone will display an in process screen while the system is connecting, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device. Selecting Yes will make this device the highest priority.
Uconnect™ ACCESS USER’S MANUAL Connecting To A Particular Mobile Phone Or Audio Device • Touch the + soft-key located to the right of the device name, Uconnect™ Phone will automatically connect to the • The options pop-up will be displayed, highest priority paired phone and/or Audio Device within range. If you would need to choose a particular • Touch the “Disconnect Device” soft-key, phone or Audio Device follow these steps: • Touch the X to exit out of the Settings screen.
Uconnect™ ACCESS USER’S MANUAL 71 Making A Phone Or Audio Device A Favorite • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth®” soft-key, • Touch the + soft-key located to the right of the device name, • The options pop-up will be displayed, • Touch the “Make Favorite” soft-key; you will see the chosen device move to the top of the list, • Touch the X to exit out of the Settings screen. Phonebook Download — Automatic Phonebook Transfer From Mobile Phone phonebook.
Uconnect™ ACCESS USER’S MANUAL downloaded names can be used. Until then, if avail- 2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the able, the previously downloaded phonebook is availappropriate number. Touch the + next to the selected able for use. number to display the options pop-up. In the pop-up • Only the phonebook of the currently connected mobile select “Add to Favorites”. phone is accessible.
Uconnect™ ACCESS USER’S MANUAL 73 To Remove A Favorite • To remove a Favorite, select phonebook from the Phone main screen. • Next select Favorites on the left side of the screen and then touch the + Options soft-key. • Touch the + next to the Favorite you would like to remove. • The Options pop-up will display, touch “Remove from Favs”. Phone Call Features For example, if your mobile service plan provides threeway calling, this feature can be accessed through the Uconnect™ Phone.
Uconnect™ ACCESS USER’S MANUAL NOTE: All of the above operations except Redial can be done with 1 call or less active. Call Controls Dial By Saying A Number The touch-screen allows you to control the following call features: • Press the • Answer button to begin, • After the “Listening” prompt and the following beep, • say “Dial 248-555-1212”, • • The Uconnect™ Phone will dial the number 248-555- • 1212.
Uconnect™ ACCESS USER’S MANUAL 75 Touch-Tone Number Entry • Missed Calls • Touch the “Phone” soft-key, • All Calls • Touch the “Dial” soft-key, These can be accessed by touching the “recent calls” soft-key on the Phone main screen. • The Touch-Tone screen will be displayed, • Use the numbered soft-keys to enter the number and touch “Call”. You can also press the button and say “Show my incoming calls” from any screen and the Incoming calls will be displayed.
Uconnect™ ACCESS USER’S MANUAL Answer Or Ignore An Incoming Call — No Call Currently In Progress NOTE: The Uconnect™ Phone compatible phones in the market today do not support rejecting an incoming call When you receive a call on your mobile phone, the when another call is in progress. Therefore, the user can Uconnect™ Phone will interrupt the vehicle audio sys- only answer an incoming call or ignore it.
Uconnect™ ACCESS USER’S MANUAL 77 Place/Retrieve A Call From Hold During an active call, touch the “Hold” soft-key on the Phone main screen. Toggling Between Calls terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically. This is cell phone-dependent. Redial If two calls are in progress (one active and one on hold), touch the “Swap” soft-key on the Phone main screen.
Uconnect™ ACCESS USER’S MANUAL NOTE: The call will remain within the vehicle audio • The roadside assistance number dialed is based on the system until the phone becomes out of range for the country where the vehicle is purchased (1-800-5282069 for the U.S., 1-877-213-4525 for Canada, 55-14Bluetooth® connection. It is recommended to press the “transfer” soft-key when leaving the vehicle. 3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico).
Uconnect™ ACCESS USER’S MANUAL 79 service or automated customer service line. Some services require immediate response selection. In some instances, that may be too quick for use of the Uconnect™ Phone. entries.
Uconnect™ ACCESS USER’S MANUAL • Pauses, wait or other characters that are supported by • Touch the “Display” soft-key, then scroll down to Voice Response Length, some phones are not supported over Bluetooth®. These additional symbols will be ignored in the dialing • Select either “Brief” or “Detailed” by touching the box a numbered sequence. next to the selection. A check-mark will appear to Barge In — Overriding Prompts show your selection.
Uconnect™ ACCESS USER’S MANUAL 81 WARNING! (Continued) and convenience of you and your passengers. Some of these should not be used when driving because they take your eyes from the road or your attention from driving. Never dial using the mobile phone keypad while driving. You can dial a phone number with your mobile phone keypad and still use the Uconnect™ Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures).
Uconnect™ ACCESS USER’S MANUAL without terminating the call. To transfer an ongoing call • Always wait for the beep before speaking. from your paired mobile phone to the Uconnect™ Phone • Speak normally, without pausing, just as you would or vice versa, press the Transfer button on the Phone speak to a person sitting a few feet/meters away from main screen. you.
Uconnect™ ACCESS USER’S MANUAL 83 • When navigating through an automated system such as voice mail, or when sending a page, before speaking the digit string, make sure to say “Send”. • It is recommended that you do not store names in your favorites phonebook while the vehicle is in motion. • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
Uconnect™ ACCESS USER’S MANUAL Your phone must support SMS over Bluetooth® in order to use this feature. If the Uconnect™ Phone determines your phone is not compatible with SMS messaging over Bluetooth® the “Messaging” button will be greyed out and the feature will not be available for use. Send Messages Using Soft-Keys: You can send messages using Uconnect™ Phone.
Uconnect™ ACCESS USER’S MANUAL 85 • After the system prompts you for what message you 7. I’m on my way. want to send, say the message you wish to send or say 8. Thanks. “List”. There are 18 preset messages. 9. I’ll be late. While the list of defined messages are being read, you can interrupt the system by pressing the button and 10. I will be minutes late. saying the message you want to send. 11. See you in minutes. After the system confirms that you want to send your 12.
Uconnect™ ACCESS USER’S MANUAL Bluetooth® Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth® ON mode. Power-Up After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system.
Uconnect™ ACCESS USER’S MANUAL 87 Voice Tree 1
Uconnect™ ACCESS USER’S MANUAL NOTE: • • • • • • Send dial tones for automated systems is available while a call is active. This is an example that uses a You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book.
Uconnect™ ACCESS USER’S MANUAL 89 NOTE: Available Voice Commands are shown in bold face and underlined in the gray shaded boxes.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 91 NOTE: • You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send a message to John Smith” and the system will ask you which phone number you want to send a message to for John Smith. • You can replace “Mobile” with “Home”, “Work” or “Other”. • You can replace “Incoming Calls” with “Outgoing Calls” or “Missed Calls”.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 93 NOTE: Available Voice Commands are shown in bold Uconnect™ Voice Command face and underlined in the gray shaded boxes. Voice Command Overview 1 The Uconnect™ Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and Sirius Travel Link. NOTE: Take care to speak into the Voice Command system as calmly and normally as possible.
Uconnect™ ACCESS USER’S MANUAL WARNING! (Continued) related to the use of the Uconnect™ features and applications in this vehicle. Only use Uconnect™ when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. what can be said based on the context you are in. After three consecutive failures of a spoken command the VR session with end. Pressing the Uconnect™ Voice Command button while the system is speaking is known as “barging in.
Uconnect™ ACCESS USER’S MANUAL 95 The system will best recognize your speech if the win- Smith”. For multiple inputs in the same phrase or sendows are closed, and the heater/air conditioning fan is tence, the system identifies the topic or context and 1 provides the associated follow-up prompt such as “Who set to low. do you want to call?” in the case where a phone call was At any point, if the system does not recognize one of your requested but the specific name was not recognized.
Uconnect™ ACCESS USER’S MANUAL Changing the Volume Disc 1. Start a dialogue by pressing the Voice Command To switch to the disc mode, say “Change source to Disc”. This command can be given in any mode or screen: button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Command system is speaking. Please note the volume setting for Voice Command is different than the audio system.
Uconnect™ ACCESS USER’S MANUAL 97 Voice Tree 1
Uconnect™ ACCESS USER’S MANUAL NOTE: 1. You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM”. 2. You can replace “80’s on 8” with any other satellite station name received by the radio. 3. You can replace “8” with any other satellite station named received by the radio. 4. You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL 99 1
Uconnect™ ACCESS USER’S MANUAL NOTE: 1. You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. 2. You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. 3. Playlist, Podcast and audio book commands are only available when the iPod is connected and playing. 4.
Uconnect™ ACCESS USER’S MANUAL 101 1
Uconnect™ ACCESS USER’S MANUAL NOTE: 1. You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines”. 2. You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams”. 3.
Uconnect™ ACCESS USER’S MANUAL 103 1
Uconnect™ ACCESS USER’S MANUAL NOTE: 1. Only available with Navigation equipped vehicles. 2. You can replace “Player” with “Radio”, “Navigation”, “Phone”, “Climate”, “More” or “Settings”. 3. Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL 105 1
Uconnect™ ACCESS USER’S MANUAL NOTE: Getting Started 1. You can also say “Find City”, “Find Favorite”, “Find To access the Navigation system, touch the Nav soft-key Play by Category”, “Find Play by Name”, “Find on bottom of the screen. Recently Found”, “Where to?” or “Go Home”. 2.
Uconnect™ ACCESS USER’S MANUAL 107 Main Menu • Touch Emergency to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Touch Stop to stop a route. • Touch Detour to detour a route. Where To? • Touch Where To? to find or route to a destination. • Touch View Map to view the map.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to search by a street address or a street name with house number. • Recent Touch this soft-key to access previously routed addresses or locations. • Point of Interest Touch this soft-key when you want to route to a point of interest. The Point of Interest database allows you to select a destination from a list of locations and public places, or points of interest (POI).
Uconnect™ ACCESS USER’S MANUAL 109 • Go Home Touch this soft-key to route to a particular city. The navigation system will calculate a route with the desti1 Touch this soft-key to program or confirm a route to the nation at the center of the city. saved home address. • Closest City • GEO Coordinates Touch this soft-key to route to a nearby city. The navigaTouch this soft-key to route to a GEO Coordinate.
Uconnect™ ACCESS USER’S MANUAL 1. While in the Nav Main Menu, touch the Where To? soft-key and then touch the Address soft-key. NOTE: To change the state and/or country, touch the state, country soft-key and follow the prompts to change the state and/or country.
Uconnect™ ACCESS USER’S MANUAL 111 select/touch the desired street name in the correct city and then you will have to enter the house number 3. Once the correct City, Street and Number has been entered, you will be asked to confirm your destination by touching OK. 4. Touch the Yes soft-key to confirm your destination and begin your route. 2. Touch Spell City or Spell Street to begin entering the address of your destination.
Uconnect™ ACCESS USER’S MANUAL You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Recent NOTE: If you are currently on a route guidance and you select an Address, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination To route to a recent destination, touch the Recent soft-key in the NAV Main Menu.
Uconnect™ ACCESS USER’S MANUAL 113 1 Touch the soft-key with the name of the desired destina- To display the options for a destination touch the Options tion. Confirm the route with Yes to start the route soft-key that looks like a gear. guidance. The following Options are available for each destination: To delete a destination from the list, touch the trash can • Edit Name icon soft-key.
Uconnect™ ACCESS USER’S MANUAL • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Point of Interest To enter a destination by Point of Interest (POI) touch the Point of Interest soft-key in the Nav Main Menu.
Uconnect™ ACCESS USER’S MANUAL 115 • All POIs • Spell POI Name You can also change your POI search area, by touching the Change Search Area soft-key.
Uconnect™ ACCESS USER’S MANUAL • In a City • Near Destination (only available during route guidance) • Along Route (only available during route guidance) NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. POI – Gas Stations To select a Gas Station POI, touch Point of Interest from the Nav Main Menu, then touch the Point of Interest soft-key and then touch the Gas Stations soft-key.
Uconnect™ ACCESS USER’S MANUAL 117 • ABC (Search) You can search for a restaurants by the following categories, which are soft-key tabs at the top of the screen. Touch the desired Gas Station and touch Yes to confirm • Name the destination.
Uconnect™ ACCESS USER’S MANUAL You can touch the back arrow soft-key to return to the NOTE: If you are currently on a route guidance and you previous screen or the X soft-key to exit. select a Hotel or Motel, the system will ask you to choose one of the following: POI – Hotels/Motels To select a Hotel or Motel POI, touch Point of Interest • Cancel previous route from the Nav Main Menu, then touch the Point of Interest • Add as first destination soft-key and then touch the Hotels/Motels soft-key.
Uconnect™ ACCESS USER’S MANUAL 119 • Name All POIs 1 • Distance • Type • ABC (Search) Touch the desired ATM or Bank and touch Yes to confirm the destination. NOTE: If you are currently on a route guidance and you select an ATM or Bank POI, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL The available categories are: • Recreation • ATM/Banking • Restaurants • Automotive • Shopping • Coffee Shops • Travel • Community • Truck • Entertainment Select a category and then select a subcategory if necessary. Touch the ABC soft-key to activate a keyboard with Alphabetic characters in order to search within the POI categories. • Gas Stations • Health and Beauty • Highway Exit • Hospital Touch the desired POI and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL 121 • Add as first destination • Cancel previous route • Add as last destination • Add as first destination You can touch the back arrow soft-key to return to the • Add as last destination previous screen or the X soft-key to exit. You can touch the back arrow soft-key to return to the POI – Spell Name previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL To save a favorite destination, touch the Add Favorite soft-key and follow the steps to route a destination. To display the options for a favorite destination touch the Options soft-key that looks like a gear.
Uconnect™ ACCESS USER’S MANUAL 123 You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. 1 Where To? – Intersection To enter a destination by Intersection, follow these steps: This menu shows the default country and state setting. NOTE: To change the state and/or country, touch the state, country soft-key and follow the prompts to change the state and/or country. 1.
Uconnect™ ACCESS USER’S MANUAL select/touch the desired street name in the correct city and then you will have to enter the intersecting street. 3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination. 4. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Intersection, the system will ask you to choose one of the following: 2.
Uconnect™ ACCESS USER’S MANUAL 125 Where To? – Go Home To enter your Home Address, follow these steps: 2. To set your set your Home Address choose one of the following options: NOTE: Refer to the individual section of the chosen option for further information. • Address • Recent • Point of Interest • Favorites • Intersection • GEO Coordinates • Point on Map • City Center • Closest Cities 1. While in the Nav Main Menu, touch the Where To? • Phone Number soft-key and then touch the Go Home soft-key.
Uconnect™ ACCESS USER’S MANUAL 4. Touch the Save soft-key to confirm your destination NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. and begin the route to your Home Address. 5. This address will be saved as your Home Address and Where To? – Trips it can be accessed by touching the Go Home soft-key in the Where To? Menu. Change/Delete Your Home Address To change or delete your current Home Address perform the following: 1.
Uconnect™ ACCESS USER’S MANUAL 127 Touch the soft-key with the name of the desired Trip and touch the first destination in the list. Confirm the route by touching Yes to start the route guidance. To add a Trip, follow these steps: 1. Touch the Create new Trip soft-key. 2. Type in the new Trip Name. 3. Touch Add Destination to add destinations to your trip. • Intersection • GEO Coordinates • Point on Map • City Center • Closest Cities • Phone Number 5. Add more needed destinations to your trip.
Uconnect™ ACCESS USER’S MANUAL • Edit Name • Move Up in the list • Move Down in the list NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – GEO Coordinate To enter a destination by GEO Coordinate, touch Where To? in the Nav Main Menu and then touch the GEO Coordinate soft-key.
Uconnect™ ACCESS USER’S MANUAL 129 3. Enter the Longitude by typing in the numbers. Use the left and right arrows to select specific numbers in the location shown. NOTE: Touch the Format soft-key to change the format of the Latitude/Longitude entry. 4. Touch OK to confirm the destination. 5. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Geo Coordinate, the system will ask you to 1.
Uconnect™ ACCESS USER’S MANUAL You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Point on Map 1. Use the touch-screen to drag the center of the cross over the desired destination. 2. Either touch the address bar at the top center of the screen to confirm your location or touch the Details soft-key in the upper right corner to display the To enter a destination by Point on Map, touch Where To? available locations near that point on the map.
Uconnect™ ACCESS USER’S MANUAL 131 3. Touch the Yes soft-key to confirm your destination and begin your route. 1 NOTE: If you are currently on a route guidance and you select a Point on Map, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 133 • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Phone 1. Touch the desired city from the list. 2. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect™ ACCESS USER’S MANUAL 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Phone number destination, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 135 1 • Options – Touch the Options soft-key to display a list • Avoid – Touch the Avoid soft-key to choose road types to avoid during your route. To make a selection touch of options to alter your route. To make a selection and release the desired setting until a check-mark touch and release the desired setting until a checkappears. mark appears.
Uconnect™ ACCESS USER’S MANUAL • Save – Touch the Save soft-key to save the destination as a Favorite. Touch the Yes soft-key to confirm your destination and to start your route guidance. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. View Map Touch the View Map soft-key from the Nav Main Menu to display a map of your current position. With the map displayed you have the following features available.
Uconnect™ ACCESS USER’S MANUAL 137 • Zoom In +/ Zoom Out – Touch a turn in the displayed Turn List for the following options: Touch the Zoom In (+) or Zoom Out (–) soft-keys to – Show on Map change the zoom level. Roads with lower functional – Avoid Street classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to view the turn list for the current View Map – Settings route. – Stop Guidance Touch this soft-key to stop route guidance. • Where Am I? Touch the area in the lower center part of the screen that displays your current location to view the Where Am I? view. Where Am I? displays the address and GEO Coordinates of your current location. – Touch the GPS soft-key to view the GPS information.
Uconnect™ ACCESS USER’S MANUAL 139 • Map Setup – Imperial (mile/yard) – Metric (meter) Touch this soft-key to display items to customize how your map is viewed. Settings – Map Setup for more • GPS information. Touch this soft-key to change the GPS display. Touch the • Speed Limit desired soft-key. – Decimal Touch this soft-key to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for – DMS your route.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to change how the Map View is displayed. Touch the desired soft-key. – 3D – 2D • Orientation Touch this soft-key to change how the Map Orientation is displayed. Touch the desired soft-key. – North Up – Heading Up With the Map displayed, touch the Options soft-key, then touch the Settings soft-key and then the Map Setup soft-key. You can also access this menu by touching the Settings soft-key in the lower right of the Nav Main Menu.
Uconnect™ ACCESS USER’S MANUAL 141 Touch this soft-key to change the Destination Information that is displayed in the upper right corner of the Map View. Touch the desired soft-key. – Time of Arrival – Time to Destination – Distance Touch this soft-key to change the vehicle icon that is displayed while in Map View. Touch Previous or Next to view the available icons. Touch the back icon soft-key when you’ve made you selection.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to show Traffic Message Channel • Digital Terrain Model (TMC) Incidents while in Map View. Touch and release Touch this soft-key to display the areas terrain while in the soft-key until a check-mark appears, showing the Map View. Touch and release the soft-key until a checksetting has been selected. mark appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL 143 • River Names Touch this soft-key to enable Voice Guidance Prompts during route guidance. Touch and release the soft-key 1 Touch this soft-key to display River Names while in Map until a check-mark appears, showing the setting has been View. Touch and release the soft-key until a check-mark selected. appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL • Navigation Turn-by-Turn Displayed in Cluster displayed while in route guidance. Touch and release the desired selection soft-key until a check-mark appears, Touch this soft-key to enable navigation turn-by-turn showing the setting has been selected. displayed in vehicles cluster during route guidance. Touch and release the soft-key until a check-mark ap- NOTE: You can touch the back arrow soft-key to return pears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL 145 NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Information – Where Am I? From the Nav Main Menu, touch the Information softkey and select one of the following options to view additional information. • Traffic • Where Am I? • Trip Computer To select Where Am I? information, touch the Information soft-key from the Nav Main Menu and then touch the Where Am I? soft-key.
Uconnect™ ACCESS USER’S MANUAL Where Am I? displays the address and GEO Coordinates of your current location. • Touch the GPS soft-key to view the GPS information. • Touch the Save soft-key to save the location in your Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Information – Trip Computer To select Trip Computer information, touch the Information soft-key from the Nav Main Menu and then touch the Trip Computer soft-key.
Uconnect™ ACCESS USER’S MANUAL 147 • Distance to final Destination 1 • Vehicle Speed • Distance Traveled • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Emergency From the Nav Main Menu, touch the Emergency soft-key and touch one of the following options to search and route to a specific location.
Uconnect™ ACCESS USER’S MANUAL • Fire Department – Search and route a Fire Department close to your current location Touch the Location soft-key to display your exact current location. Touch the Save soft-key to save your current location in Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 149 • Distance Emergency – Police • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Hospital and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL You can search for a Police Station by the following • Add as last destination categories, which are soft-key tabs at the top of the You can touch the back arrow soft-key to return to the screen. previous screen or the X soft-key to exit. • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Police Station and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL 151 Emergency – Fire Department You can search for a Fire Department by the following categories, which are soft-key tabs at the top of the screen. • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Fire Department and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Security Features costs, you are responsible for them. If Roadside Assistance is provided to your vehicle, you agree to be responsible for any additional roadside assistance service costs that you may incur.
Uconnect™ ACCESS USER’S MANUAL 153 9–1–1 Call – If Equipped 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit The 9-1-1 Call system is an embedded phone system that 1 the following important vehicle information to a 9-1-1 allows you to connect to a 9-1-1 operator in an emeroperator: gency. You can choose to press the 9-1-1 Call button on • indication that the occupant placed a 9-1-1 Call; the Rearview Mirror to contact a 9-1-1 operator.
Uconnect™ ACCESS USER’S MANUAL NOTE: Once a connection is made between the vehicle’s 6. If a connection between the vehicle and a 9-1-1 opera9-1-1 Call system and the 9-1-1 operator, the 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the tor may be able to open a voice connection with the vehicle to determine if additional help is needed. Once last known GPS coordinates of your vehicle.
Uconnect™ ACCESS USER’S MANUAL 155 WARNING! (Continued) or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. WARNING! The 9-1-1 Call system is embedded into the vehicle’s electrical system. Do not add any aftermarket electrical equipment to the vehicle’s electrical system. This may prevent your vehicle from sending a signal to initiate an emergency call.
Uconnect™ ACCESS USER’S MANUAL WARNING! Ignoring the Rearview Mirror light could mean you will not have 9-1-1 Call services. If the Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately. WARNING! The ORC turns on the Air Bag Warning Light on the instrument panel if a malfunction in any part of the system is detected. If the Air Bag Warning Light is illuminated, the 9-1-1 system may not be able to send a signal to a 9-1-1 operator.
Uconnect™ ACCESS USER’S MANUAL 157 • Operator error by the 9-1-1 operator; • Wireless network congestion; • Weather; and • Buildings, structures, geographic terrain, or tunnels. WARNING! Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle from placing an emergency call. Wireless and GPS signal reception is required for the 9-1-1 Call system to function properly.
Uconnect™ ACCESS USER’S MANUAL Uconnect™ 8.4AN Uconnect™ 8.4AN System Touch the Radio soft-key to enter the Radio Mode. The different tuner modes; AM, FM and SXM can be selected by touching the corresponding soft-keys in the Radio Mode. 2. Media Touch the Media soft-key to access media sources such as: Disc, USB Device and AUX as long as the requested media is present. 3. Climate Refer to Climate Controls in your vehicles Owner ’s Manual on the DVD for further details. 4. Nav 1.
Uconnect™ ACCESS USER’S MANUAL 159 Touch the Phone soft-key to access the Uconnect™ Phone Press the BACK button to return to a previous menu or feature. screen. 6. Apps 10. SCREEN OFF Touch the Apps soft-key to access Smartphone and Connected vehicle options. Press the SCREEN OFF hard-key to turn the touch-screen OFF. To turn the screen back ON, just touch the screen. 7. Settings 11.
Uconnect™ ACCESS USER’S MANUAL Touch the RADIO Soft Key, bottom left corner, to enter the Radio Mode. The different tuner modes; AM, FM, and SAT, can then, be selected by touching the corresponding soft-keys in the Radio mode. Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection.
Uconnect™ ACCESS USER’S MANUAL 161 Seek Up Fast Seek Down Touch and release the Seek Up soft-key to tune the radio to the next listenable station or channel. During a Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.
Uconnect™ ACCESS USER’S MANUAL GO You can switch between the two radio presets by touching the arrow soft key located in the upper right of the Once the last digit of a station has been entered, the radio screen. DIRECT TUNE screen will close and the system will automatically tune to that station. Browse in AM/FM The selected Station or Channel number is displayed in When in either AM or FM, the Browse Screen provides a the Direct Tune text box.
Uconnect™ ACCESS USER’S MANUAL 163 When selected, the radio tunes to the station stored in the programming for children, directly from its satellites and Preset and returns to the main radio screen. broadcasting studios. A one-year SiriusXM™ Satellite 1 Radio subscription is included. Deleting Presets SiriusXM™ and all related marks and logos are tradeA Preset can be deleted in the Presets Browse screen by marks of SiriusXM™ Radio Inc. and its subsidiaries.
Uconnect™ ACCESS USER’S MANUAL If the screen shows Acquiring Signal, you might have to When in Satellite mode: change the vehicle’s position in order to receive a signal. • The SAT button is highlighted blue. In most cases, the satellite radio does not receive a signal • The SiriusXM™ Presets are displayed at the top of the in underground parking garages or tunnels. screen. No Subscription • The Genre is displayed below the Presets Bar.
Uconnect™ ACCESS USER’S MANUAL 165 In addition to the tuning Operation functions common to Touch the Pause or Play soft-key to pause playing of the all Radio modes, the replay, Traffic/Weather Jump, and content at any time that the content is playing live or 1 fav soft-key functions are available in SiriusXM™ Mode. rewound content. Play can be resumed again by touching of the Pause/Play soft-key.
Uconnect™ ACCESS USER’S MANUAL Live Fav. Artist While the song is playing to set a Favorite Artist, touch the fav. soft-key and then the Fav. Artist Touch the Live soft-key to resume playing of Live consoft-key. tent. Fav. Song While the song is playing to set a Favorite Favorites Song, touch the fav. soft-key and then the Fav Song Touch the fav. soft-key to activate the favorites menu, soft-key. which will time out in 5 seconds in absence of user Traffic & Weather interaction.
Uconnect™ ACCESS USER’S MANUAL 167 Browse in SAT Genre Touch the browse soft-key to edit Presets, Favorites, Touch the Genre button to display a list of Genres. You Game Zone, and Jump settings, along with providing the can select any desired Genre by touching the Genre list, at SiriusXM™ Channel List. which point, the Radio tunes to a channel with the content in the selected Genre. This Screen contains many sub menus.
Uconnect™ ACCESS USER’S MANUAL When selected, the Radio tunes to the station stored in Remove Favorites the Preset, and returns to the main Radio screen. Touch the Remove Favorites tab at the top of the screen. Deleting a Preset Touch the Delete All soft-key to delete all of the Favorites or touch the Trash Can icon next to the Favorite to be A Preset can be deleted in the Presets Browse screen by deleted. touching the Trash Can Icon for the corresponding Preset.
Uconnect™ ACCESS USER’S MANUAL 169 Touch the On-Air tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and touching any of the items in the list tunes the radio to that channel. Select Teams Touch the Select Teams soft-key to activate the League Scroll list. Touch the chosen league and a scroll list of all teams within the league will appear, then you can select a team by touching the corresponding box.
Uconnect™ ACCESS USER’S MANUAL Equalizer Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade the audio between the Touch the Equalizer soft-key to activate the Equalizer rear and front speakers. screen. Touching the Front, Rear, Left, or Right soft-keys or touch Touch the + or - soft-keys, or by touching and dragging and drag the blue Speaker Icon to adjust the Balance/ over the level bar for each of the equalizer bands. The Fade.
Uconnect™ ACCESS USER’S MANUAL 171 Speed Adjusted Volume audio volume with variation to vehicle speed. Volume increases automatically as speed increase to compensate for normal road noise. Surround System (If Equipped) Touch the On soft-key to activate Surround Sound. Touch Off to deactivate this feature. When Surround Sound is On, you can hear audio coming from every direction as in a movie theatre or home theatre system.
Uconnect™ ACCESS USER’S MANUAL A “No Disc” message will be displayed on the screen in which can be scrolled by touching the Up and Down the Disc mode when a Disc is not present in the Radio. soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Seek Up/Down Source Touch and release the right arrow soft-key for the next selection on the Disc.
Uconnect™ ACCESS USER’S MANUAL 173 Touch the shuffle soft-key to play the selections on the compact disc in random order to provide an interesting change of pace. Touch the soft-key a second time to turn this feature off. USB/iPod® Mode is entered by either inserting a USB device or iPod® and cable into the USB Port or touch the iPod® soft-key on the left side of the display. Once in Media Mode, touch the source soft-key and select iPod®.
Uconnect™ ACCESS USER’S MANUAL desired soft-key on the left side of the screen. The center of the browse window shows items and it’s subfunctions, which can be scrolled by touching the Up and Down soft-keys to the right. The Scroll/Tune knob can also be used to scroll. Source Touch the shuffle soft-key to play the selections on the USB/iPod® device in random order to provide an interesting change of pace. Touch the soft-key a second time to turn this feature off.
Uconnect™ ACCESS USER’S MANUAL 175 Touching the trks soft-key while the pop up is displayed Controlling the Auxiliary Device will close the pop up. The control of the auxiliary device (e.g., selecting playAudio lists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume Refer to Radio Mode for adjusting the audio settings. with the ON/OFF VOLUME rotary knob, or with the OPERATING INSTRUCTIONS – AUX MODE volume of the attached device.
Uconnect™ ACCESS USER’S MANUAL Touch the browse soft-key to display the browse window. The left side of the browse window displays a list of ways OPERATING INSTRUCTIONS – SD CARD you can browse through the contents of the SD Card. If MODE supported by the device, you can browse by Folders, Overview Artists, Playlists, Albums, Songs, etc. Touch the desired soft-key on the left side of the screen.
Uconnect™ ACCESS USER’S MANUAL 177 Touch the repeat soft-key to toggle the repeat functionality. The Repeat soft-key is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active. Shuffle and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then press the ENTER/ BROWSE knob to start playing that track.
Uconnect™ ACCESS USER’S MANUAL Before proceeding, the Bluetooth® device needs to be Touch the Source soft-key to select the desired audio paired through Uconnect™ Phone in order to communi- source, Disc, USB/iPod®, SD Card, AUX or Bluetooth® . cate with the Uconnect™ Access System. This screen will time out after a few seconds and return to the main radio screen if no selection is made. NOTE: See the pairing procedure in the Uconnect™ Tracks Phone section for more details.
Uconnect™ ACCESS USER’S MANUAL 179 Uconnect™ Phone Uconnect Phone™ Overview • Calling Back the last incoming call number (“Call Back”). • View Call logs on screen (“Show incoming calls”, Uconnect™ Phone is a voice-activated, hands-free, in“Show Outgoing calls”, “Show missed Calls”, “Show vehicle communications system. Uconnect™ Phone alRecent Calls”). lows you to dial a phone number with your mobile phone. • Searching Contacts phone number (“Search for John Smith Mobile”).
Uconnect™ ACCESS USER’S MANUAL • Sending a text message via the touch-screen. • Listen to Music on your Bluetootht Device via the touch-screen. • Pairing up to 10 phones/audio devices for easy access to connect to them quickly. NOTE: Your phone must be capable of SMS messaging via Bluetooth® for messaging features to work properly. Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect™ Phone.
Uconnect™ ACCESS USER’S MANUAL 181 the vehicle’s Uconnect™ Phone. The Uconnect™ Phone allows up to ten mobile phones or audio devices to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time. The system is available in English, Spanish, or French languages. The button is also used to access the Voice Commands for the Uconnect™ Voice Command features if your vehicle is equipped.
Uconnect™ ACCESS USER’S MANUAL 1. Say compound commands like “Call John Smith mobile”. 2. Say the individual commands and allow the system to guide you to complete the task. You will be prompted for a specific command and then guided through the available options. say each part of the command when you are asked for it.
Uconnect™ ACCESS USER’S MANUAL 183 The system handles multiple inputs in the same phrase or sentence such as “make a phone call” and “to Kelly Smith”. For multiple inputs in the same phrase or sentence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who do you want to call?” in the case where a phone call was requested but the specific name was not recognized.
Uconnect™ ACCESS USER’S MANUAL To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. The Uconnect™ website may also provide detailed instructions for pairing. NOTE: • You must have Bluetooth® enabled on your phone to complete this procedure. • The vehicle must be in PARK. 1. Press the “Phone” soft-key on the screen to begin.
Uconnect™ ACCESS USER’S MANUAL 185 Pair Additional Mobile Phones • Touch the “Settings” soft-key from the Phone main screen, • Next, touch the “Phone/Bluetooth®” soft-key, • Search for available devices on your Bluetooth® enabled mobile phone.
Uconnect™ ACCESS USER’S MANUAL • “Show Paired Phones” or • “Connect My Phone” Pair A Bluetooth® Streaming Audio Device • Touch the “Player” or “Media” soft-key to begin, • Change the Source to Bluetooth®, • Uconnect™ Phone will display an in process screen while the system is connecting, • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device. Selecting Yes will make this device the highest priority.
Uconnect™ ACCESS USER’S MANUAL 187 Connecting To A Particular Mobile Phone Or Audio Device • Touch the + soft-key located to the right of the device name, Uconnect™ Phone will automatically connect to the • The options pop-up will be displayed, highest priority paired phone and/or Audio Device • Touch the “Disconnect Device” soft-key, within range. If you would need to choose a particular phone or Audio Device follow these steps: • Touch the X to exit out of the Settings screen.
Uconnect™ ACCESS USER’S MANUAL Making A Phone Or Audio Device A Favorite • Touch the “Settings” soft-key, • Touch the “Phone/Bluetooth®” soft-key, • Touch the + soft-key located to the right of the device name, • The options pop-up will be displayed, • Touch the “Make Favorite” soft-key; you will see the chosen device move to the top of the list, • Touch the X to exit out of the Settings screen. Phonebook Download — Automatic Phonebook Transfer From Mobile Phone phonebook.
Uconnect™ ACCESS USER’S MANUAL 189 downloaded names can be used. Until then, if avail- 2. After loading the mobile phonebook, select phonebook from the Phone main screen, then select the able, the previously downloaded phonebook is avail1 appropriate number. Touch the + next to the selected able for use. number to display the options pop-up. In the pop-up • Only the phonebook of the currently connected mobile select “Add to Favorites”. phone is accessible.
Uconnect™ ACCESS USER’S MANUAL To Remove A Favorite • To remove a Favorite, select phonebook from the Phone main screen. • Next select Favorites on the left side of the screen and then touch the + Options soft-key. • Touch the + next to the Favorite you would like to remove. • The Options pop-up will display, touch “Remove from Favs”. Phone Call Features For example, if your mobile service plan provides threeway calling, this feature can be accessed through the Uconnect™ Phone.
Uconnect™ ACCESS USER’S MANUAL 191 NOTE: All of the above operations except Redial can be Call Controls done with 1 call or less active. The touch-screen allows you to control the following call features: Dial By Saying A Number • Press the button to begin, • Answer • After the “Listening” prompt and the following beep, • say “Dial 248-555-1212”, • • The Uconnect™ Phone will dial the number 248-555- • 1212.
Uconnect™ ACCESS USER’S MANUAL Touch-Tone Number Entry • Missed Calls • Touch the “Phone” soft-key, • All Calls • Touch the “Dial” soft-key, These can be accessed by touching the “recent calls” soft-key on the Phone main screen. • The Touch-Tone screen will be displayed, • Use the numbered soft-keys to enter the number and touch “Call”. You can also press the button and say “Show my incoming calls” from any screen and the Incoming calls will be displayed.
Uconnect™ ACCESS USER’S MANUAL 193 NOTE: The Uconnect™ Phone compatible phones in the market today do not support rejecting an incoming call 1 when another call is in progress. Therefore, the user can When you receive a call on your mobile phone, the only answer an incoming call or ignore it. Uconnect™ Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the Making A Second Call While Current Call Is In button to accept the call. To ignore the Progress call.
Uconnect™ ACCESS USER’S MANUAL Place/Retrieve A Call From Hold During an active call, touch the “Hold” soft-key on the Phone main screen. Toggling Between Calls terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically. This is cell phone-dependent. Redial If two calls are in progress (one active and one on hold), touch the “Swap” soft-key on the Phone main screen.
Uconnect™ ACCESS USER’S MANUAL 195 NOTE: The call will remain within the vehicle audio phone and the Uconnect™ Phone, follow the instructions system until the phone becomes out of range for the described in your mobile phone User’s Manual. Bluetooth® connection. It is recommended to press the Things You Should Know About Your Uconnect™ “transfer” soft-key when leaving the vehicle.
Uconnect™ ACCESS USER’S MANUAL • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down.
Uconnect™ ACCESS USER’S MANUAL 197 • Performance, such as audio clarity, echo, and loudness NOTE: Uconnect™ Phone SMS is only available when to a large degree rely on the phone and network, and the vehicle is not in moving. not the Uconnect™ Phone. Read Messages: • Echo at the far end can sometimes be reduced by If you receive a new text message while your phone is lowering the in-vehicle audio volume.
Uconnect™ ACCESS USER’S MANUAL • Touch the “messaging” soft-key then “New Message”, While the list of defined messages are being read, you can interrupt the system by pressing the button and • Touch one of the 18 preset messages and the person saying the message you want to send. you wish to send the message to, After the system confirms that you want to send your • If multiple numbers are available for the contact select message to John Smith, your message will be sent.
Uconnect™ ACCESS USER’S MANUAL 199 9. I’ll be late. 10. I will be minutes late. 11. See you in minutes. 12. Stuck in traffic. 13. Start without me. 14. Where are you? 15. Are you there yet? 16. I need directions. 17. I’m lost. 18. See you later. Bluetooth® Communication Link Mobile phones have been found to lose connection to the Uconnect™ Phone. When this happens, the connection can generally be reestablished by switching the phone OFF/ON.
Uconnect™ ACCESS USER’S MANUAL Voice Tree
Uconnect™ ACCESS USER’S MANUAL 201 • Send dial tones for automated systems is available while a call is active. This is an example that uses a You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.” mobile or favorite phone book.
Uconnect™ ACCESS USER’S MANUAL NOTE: Available Voice Commands are shown in bold face and underlined in the gray shaded boxes.
Uconnect™ ACCESS USER’S MANUAL 203 1
Uconnect™ ACCESS USER’S MANUAL NOTE: • You can replace “4” with any message number shown on the screen. • You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send • If your phone does not support phonebook download a message to John Smith” and the system will ask you or call log download over Bluetooth than these commands will return a response that the contact does not which phone number you want to send a message to for John Smith.
Uconnect™ ACCESS USER’S MANUAL 205 1
Uconnect™ ACCESS USER’S MANUAL NOTE: Available Voice Commands are shown in bold Uconnect™ Voice Command face and underlined in the gray shaded boxes. Voice Command Overview The Uconnect™ Voice Command system allows you to control your AM, FM radio, satellite radio, disc player, SD Card, USB/iPod and Sirius Travel Link. NOTE: Take care to speak into the Voice Command system as calmly and normally as possible.
Uconnect™ ACCESS USER’S MANUAL 207 WARNING! (Continued) related to the use of the Uconnect™ features and applications in this vehicle. Only use Uconnect™ when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. what can be said based on the context you are in. After three consecutive failures of a spoken command the VR session with end. Pressing the Uconnect™ Voice Command button while the system is speaking is known as “barging in.
Uconnect™ ACCESS USER’S MANUAL The system will best recognize your speech if the win- Smith”. For multiple inputs in the same phrase or sendows are closed, and the heater/air conditioning fan is tence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who set to low. do you want to call?” in the case where a phone call was At any point, if the system does not recognize one of your requested but the specific name was not recognized.
Uconnect™ ACCESS USER’S MANUAL 209 Changing the Volume Disc 1. Start a dialogue by pressing the Voice Command To switch to the disc mode, say “Change source to Disc”. This command can be given in any mode or screen: button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Command system is speaking. Please note the volume setting for Voice Command is different than the audio system.
Uconnect™ ACCESS USER’S MANUAL Voice Tree
Uconnect™ ACCESS USER’S MANUAL 211 NOTE: 1. You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM”. 2. You can replace “80’s on 8” with any other satellite station name received by the radio. 3. You can replace “8” with any other satellite station named received by the radio. 4. You can replace “rock” with any of the satellite music types. NOTE: Available Voice Commands are shown in bold face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 213 NOTE: 1. You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. 2. You can replace “8” with any track on the CD that is currently playing. Command is only available when CD is playing. 3. Playlist, Podcast and audio book commands are only available when the iPod is connected and playing. 4.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 215 NOTE: 1. You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines”. 2. You can replace “Headlines” with any menu items shown on a league screen. For example you can say “Show NFL Schedule and results” or “Show NCAA Basketball AP top 25” or “Show Major League Baseball Teams”. 3.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 217 NOTE: 1. Only available with Navigation equipped vehicles. 2. You can replace “Player” with “Radio”, “Navigation”, “Phone”, “Climate”, “More” or “Settings”. 3. Navigation commands only work if equipped with Navigation. NOTE: Available Voice Commands are shown in bold face and shaded grey.
Uconnect™ ACCESS USER’S MANUAL
Uconnect™ ACCESS USER’S MANUAL 219 NOTE: Main Menu 1. You can also say “Find City”, “Find Favorite”, “Find Play by Category”, “Find Play by Name”, “Find Recently Found”, “Where to?” or “Go Home”. 1 2. You can say “Find Nearest” then “Restaurant”, “Fuel”, “Transit”, “Lodging”, “Shopping”, “Bank”, “Entertainment”, “Recreation”, “Attractions”, “Community”, “Auto Services”, “Hospitals”, “Parking”, “Airport”, “Police Stations”, “Fire Stations”, or “Auto Dealers”.
Uconnect™ ACCESS USER’S MANUAL • Touch Emergency to search for Hospitals, Police and Fire Stations near your current location. You can also display your current location and save any Emergency facility location to your Favorites. • Touch Stop to stop a route. • Touch Detour to detour a route. Where To? From the Nav Main Menu, touch the Where To? soft-key and select one of the following methods to program a route guidance.
Uconnect™ ACCESS USER’S MANUAL 221 Touch this soft-key to search by a street address or a street name with house number. • Recent • Go Home Touch this soft-key to program or confirm a route to the saved home address. Touch this soft-key to access previously routed addresses • GEO Coordinates or locations. Touch this soft-key to route to a GEO Coordinate. A geo • Point of Interest coordinate is a coordinate used in geography.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to route to a particular city. The navigation system will calculate a route with the destination at the center of the city. • Closest City Touch this soft-key to route to a nearby city. The navigation system will calculate a route with the destination at the center of the nearby city. • Phone Number Touch this soft-key to route to a location or point of interest by the phone number. NOTE: You can touch the back arrow soft-key to return 1.
Uconnect™ ACCESS USER’S MANUAL 223 1 NOTE: To change the state and/or country, touch the 2. Touch Spell City or Spell Street to begin entering the address of your destination. state, country soft-key and follow the prompts to change the state and/or country. If you touch Spell City, you will have to enter and select/touch the desired city name, followed by the desired street name and lastly the house number.
Uconnect™ ACCESS USER’S MANUAL select/touch the desired street name in the correct city and then you will have to enter the house number 3. Once the correct City, Street and Number has been entered, you will be asked to confirm your destination by touching OK. 4. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect™ ACCESS USER’S MANUAL 225 You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. 1 Where To? – Recent Touch the soft-key with the name of the desired destination. Confirm the route with Yes to start the route guidance. To delete a destination from the list, touch the trash can To route to a recent destination, touch the Recent soft-key icon soft-key. in the NAV Main Menu.
Uconnect™ ACCESS USER’S MANUAL • Move Up in the list • Move Down in the list • Place Pin on the location (saves the spot on the list) NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Point of Interest To enter a destination by Point of Interest (POI) touch the Point of Interest soft-key in the Nav Main Menu. To display the options for a destination touch the Options soft-key that looks like a gear.
Uconnect™ ACCESS USER’S MANUAL 227 1 The Point of Interest database allows you to select a You have the following POIs to choose from: destination from a list of locations and public places, or • Gas Stations points of interest (POI)s.
Uconnect™ ACCESS USER’S MANUAL • All POIs • In a City • Spell POI Name • Near Destination (only available during route guidance) You can also change your POI search area, by touching the Change Search Area soft-key. You will have the • Along Route (only available during route guidance) following options to change your search area: NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 229 • ABC (Search) Touch the desired Gas Station and touch Yes to confirm the destination. NOTE: If you are currently on a route guidance and you select a gas station, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can search for a gas station by the following categories, which are soft-key tabs at the top of the screen.
Uconnect™ ACCESS USER’S MANUAL You can search for a restaurants by the following catego- You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. ries, which are soft-key tabs at the top of the screen. • Name POI – Hotels/Motels • Distance To select a Hotel or Motel POI, touch Point of Interest from the Nav Main Menu, then touch the Point of Interest soft-key and then touch the Hotels/Motels soft-key.
Uconnect™ ACCESS USER’S MANUAL 231 NOTE: If you are currently on a route guidance and you • Name select a Hotel or Motel, the system will ask you to choose • Distance one of the following: • Type • Cancel previous route • ABC (Search) • Add as first destination Touch the desired ATM or Bank and touch Yes to confirm • Add as last destination the destination.
Uconnect™ ACCESS USER’S MANUAL All POIs The available categories are: • ATM/Banking • Automotive • Coffee Shops • Community • Entertainment • Gas Stations • Health and Beauty • Highway Exit • To select a POI type, touch Point of Interest from the Nav Main Menu, then touch the Point of Interest soft-key and • then touch All POIs soft-key. • You can search through the available POI categories to • find your desired POI.
Uconnect™ ACCESS USER’S MANUAL 233 • Recreation • Add as first destination • Restaurants • Add as last destination • Shopping You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. • Travel • Truck POI – Spell Name To search for a specific POI, touch Point of Interest from Select a category and then select a subcategory if necesthe Nav Main Menu, then touch the Point of Interest sary.
Uconnect™ ACCESS USER’S MANUAL • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Favorite Destinations To route to a favorite destination, touch the Favorites soft-key in the NAV Main Menu. Touch the soft-key with the name of the desired favorite destination and confirm the route with Yes to start the route guidance.
Uconnect™ ACCESS USER’S MANUAL 235 To save a favorite destination, touch the Add Favorite You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. soft-key and follow the steps to route a destination. To display the options for a favorite destination touch the Options soft-key that looks like a gear.
Uconnect™ ACCESS USER’S MANUAL This menu shows the default country and state setting. NOTE: To change the state and/or country, touch the state, country soft-key and follow the prompts to change the state and/or country. 2. This menu shows the default country and state settings. If you touch Spell City, you will have to enter and select/touch the desired city name, followed by the desired street name and lastly you will have to enter the intersection street.
Uconnect™ ACCESS USER’S MANUAL 237 select/touch the desired street name in the correct city Where To? – Go Home and then you will have to enter the intersecting street. To enter your Home Address, follow these steps: 3. Once the correct City and Intersection has been entered, you will be asked to confirm your destination. 4. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect™ ACCESS USER’S MANUAL 2. To set your set your Home Address choose one of the following options: 4. Touch the Save soft-key to confirm your destination and begin the route to your Home Address. NOTE: Refer to the individual section of the chosen 5. This address will be saved as your Home Address and option for further information. it can be accessed by touching the Go Home soft-key in the Where To? Menu.
Uconnect™ ACCESS USER’S MANUAL 239 NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Trips Touch the soft-key with the name of the desired Trip and touch the first destination in the list. Confirm the route by touching Yes to start the route guidance. To add a Trip, follow these steps: 1. Touch the Create new Trip soft-key. 2. Type in the new Trip Name. 3. Touch Add Destination to add destinations to your trip. 4.
Uconnect™ ACCESS USER’S MANUAL • Intersection • GEO Coordinates • Point on Map • City Center • Closest Cities • Phone Number 5. Add more needed destinations to your trip. NOTE: Each destination will be listed in order, with the last destination being the final destination. 6. Your new Trip will appear on the Trips list. To delete a Trip from the list, touch the trash can icon soft-key. To display the options for a trip touch the Options soft-key that looks like a gear.
Uconnect™ ACCESS USER’S MANUAL 241 1 To enter a destination by GEO Coordinate, touch Where 1. Enter the Latitude by typing in the numbers. Use the left and right arrows to select specific numbers in the To? in the Nav Main Menu and then touch the GEO location shown. Coordinate soft-key. 2. Touch the OK soft-key.
Uconnect™ ACCESS USER’S MANUAL 3. Enter the Longitude by typing in the numbers. Use the You can touch the back arrow soft-key to return to the left and right arrows to select specific numbers in the previous screen or the X soft-key to exit. location shown. Where To? – Point on Map NOTE: Touch the Format soft-key to change the format of the Latitude/Longitude entry. 4. Touch OK to confirm the destination. 5. Touch the Yes soft-key to confirm your destination and begin your route.
Uconnect™ ACCESS USER’S MANUAL 243 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Point on Map, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. 1. Use the touch-screen to drag the center of the cross over the desired destination.
Uconnect™ ACCESS USER’S MANUAL 3. Enter the Longitude by typing in the numbers. Use the You can touch the back arrow soft-key to return to the begin your route. NOTE: If you are currently on a route guidance and you select a City Center, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 245 1 To enter a destination by Closest City, touch Where To? in 1. Touch the desired city from the list. the Nav Main Menu and then touch the Closest City 2. Touch the Yes soft-key to confirm your destination and soft-key. begin your route.
Uconnect™ ACCESS USER’S MANUAL • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Where To? – Phone To enter a destination by Phone number, touch Where To? in the Nav Main Menu and then touch the Phone Number soft-key. 1. Enter the Phone Number of the destination you would like to route to. 2. Touch the desired destination from the list.
Uconnect™ ACCESS USER’S MANUAL 247 3. Touch the Yes soft-key to confirm your destination and begin your route. NOTE: If you are currently on a route guidance and you select a Phone number destination, the system will ask you to choose one of the following: • Cancel previous route • Add as first destination • Add as last destination You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL • Save – Touch the Save soft-key to save the destination as a Favorite. Touch the Yes soft-key to confirm your destination and to start your route guidance. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. View Map • Avoid – Touch the Avoid soft-key to choose road types to avoid during your route. To make a selection touch and release the desired setting until a check-mark appears.
Uconnect™ ACCESS USER’S MANUAL 249 • Zoom In +/ Zoom Out – Touch the Zoom In (+) or Zoom Out (–) soft-keys to change the zoom level. Roads with lower functional classification are not shown in higher zoom levels. (E.g. residential streets, lightly-traveled county roads.) • Time of Arrival/Time to Destination/Distance (only during route guidance) Touch the View Map soft-key from the Nav Main Menu to display a map of your current position.
Uconnect™ ACCESS USER’S MANUAL Touch a turn in the displayed Turn List for the following Touch this soft-key to view the turn list for the current options: route. – Stop Guidance – Show on Map Touch this soft-key to stop route guidance. – Avoid Street • Where Am I? • Options (only during route guidance) Touch the Options soft-key to display the following options. Touch the desired soft-key. – 2D North Up/Map View 2D/ Map View 3D Touch this soft-key to scroll between the three viewing options.
Uconnect™ ACCESS USER’S MANUAL 251 View Map – Settings • Map Setup Touch this soft-key to display items to customize how your map is viewed. Settings – Map Setup for more information. • Speed Limit Touch this soft-key to turn on/off speed limit warning announcements and to enter a pre-defined speed limit for your route. • Guidance Options Touch this soft-key to display items to customize your route guidance. Settings – Guidance Options for more information.
Uconnect™ ACCESS USER’S MANUAL – Imperial (mile/yard) – Metric (meter) • GPS Touch this soft-key to change the GPS display. Touch the desired soft-key. – Decimal – DMS – DM • Copy device information to USB? (If Equipped) Touch this soft-key to copy your radio information to a USB jump drive through the available USB port. Settings – Map Setup With the Map displayed, touch the Options soft-key, then touch the Settings soft-key and then the Map Setup soft-key.
Uconnect™ ACCESS USER’S MANUAL 253 Touch this soft-key to change how the Map View is Touch this soft-key to change the Destination Information displayed. Touch the desired soft-key. that is displayed in the upper right corner of the Map View. Touch the desired soft-key. – 3D – Time of Arrival – 2D – Time to Destination • Orientation – Distance Touch this soft-key to change how the Map Orientation is • AutoZoom displayed. Touch the desired soft-key.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to change the vehicle icon that is displayed while in Map View. Touch Previous or Next to view the available icons. Touch the back icon soft-key when you’ve made you selection. Touch this soft-key to show Traffic Message Channel (TMC) Incidents while in Map View. Touch and release the soft-key until a check-mark appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL 255 • Digital Terrain Model • River Names Touch this soft-key to display the areas terrain while in Touch this soft-key to display River Names while in Map Map View. Touch and release the soft-key until a check- View. Touch and release the soft-key until a check-mark appears, showing the setting has been selected. mark appears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL Touch this soft-key to enable Voice Guidance Prompts • Navigation Turn-by-Turn Displayed in Cluster during route guidance. Touch and release the soft-key Touch this soft-key to enable navigation turn-by-turn until a check-mark appears, showing the setting has been displayed in vehicles cluster during route guidance. selected. Touch and release the soft-key until a check-mark ap• Nav Volume Adjustment pears, showing the setting has been selected.
Uconnect™ ACCESS USER’S MANUAL 257 displayed while in route guidance. Touch and release the desired selection soft-key until a check-mark appears, showing the setting has been selected. 1 NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. Information From the Nav Main Menu, touch the Information softkey and select one of the following options to view additional information.
Uconnect™ ACCESS USER’S MANUAL NOTE: You can touch the back arrow soft-key to return Where Am I? displays the address and GEO Coordinates to the previous screen or the X soft-key to exit. of your current location. Information – Where Am I? • Touch the GPS soft-key to view the GPS information. • Touch the Save soft-key to save the location in your Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 259 • Distance to final Destination • Vehicle Speed • Distance Traveled • Overall average speed • Moving average speed • Maximum speed reached • Total time traveled • Travel time spent moving • Travel time spent stopped To select Trip Computer information, touch the Information soft-key from the Nav Main Menu and then touch NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. the Trip Computer soft-key.
Uconnect™ ACCESS USER’S MANUAL • Fire Department – Search and route a Fire Department close to your current location Touch the Location soft-key to display your exact current location. Touch the Save soft-key to save your current location in Favorites. NOTE: You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 261 • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Hospital and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL Emergency – Police You can search for a Police Station by the following categories, which are soft-key tabs at the top of the screen. • Name • Distance • ABC (Search) NOTE: In case of emergency, please contact the facility to verify their availability before proceeding. Touch the desired Police Station and touch Yes to confirm the destination.
Uconnect™ ACCESS USER’S MANUAL 263 • Add as last destination Emergency – Fire Department 1 You can touch the back arrow soft-key to return to the previous screen or the X soft-key to exit. To search for a Fire Department close to your current location, touch Emergency from the Nav Main Menu and then touch the Fire Department soft-key.
Uconnect™ ACCESS USER’S MANUAL You can search for a Fire Department by the following • Add as last destination categories, which are soft-key tabs at the top of the You can touch the back arrow soft-key to return to the screen. previous screen or the X soft-key to exit.
Uconnect™ ACCESS USER’S MANUAL 265 costs, you are responsible for them. If Roadside Assis- 9–1–1 Call – If Equipped tance is provided to your vehicle, you agree to be The 9-1-1 Call system is an embedded phone system that 1 responsible for any additional roadside assistance service allows you to connect to a 9-1-1 operator in an emercosts that you may incur. gency.
Uconnect™ ACCESS USER’S MANUAL 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit the following important vehicle information to a 9-1-1 operator: • indication that the occupant placed a 9-1-1 Call; • the vehicle brand; and • the last known GPS coordinates of the vehicle.
Uconnect™ ACCESS USER’S MANUAL 267 6. If a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit certain vehicle information to a 9-1-1 operator, including the last known GPS coordinates of your vehicle. If a connection is made between a 9-1-1 operator and your vehicle, you understand and agree that 9-1-1 operators may record conversations and sounds in your car upon connection and consent to such recordings.
Uconnect™ ACCESS USER’S MANUAL 9-1-1 Call System Limitations Vehicles sold in Canada and Mexico DO NOT have 9-1-1 Call system capabilities. 9-1-1 or other emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls.
Uconnect™ ACCESS USER’S MANUAL 269 Even if the 9-1-1 Call system is fully functional, factors • Operator error by the 9-1-1 operator; beyond Chrysler Group LLC’s control may prevent or • Wireless network congestion; stop 9-1-1 Call system operation. These include, but are • Weather; and not limited to, the following factors: • The ignition key has been removed from the ignition • Buildings, structures, geographic terrain, or tunnels.
Uconnect™ ACCESS USER’S MANUAL WARNING! Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and/or serious injury. Remote Service Features If your vehicle is equipped with Remote Service Features, for more information, refer to www.MoparOwnerConnect.com or call 855-792-4241.
INDEX 10
2 INDEX General Information . . . . . . . . . . . . . . . . . . . . .