SPEECH DIALOGUE SYSTEM Answer or Reject an Incoming Call when another Call in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the UConnect™ button to place the current call on hold and answer the incoming call. Note: The UConnect™ system compatible phones in market today do not support rejecting an incoming call when another call is in progress.
SPEECH DIALOGUE SYSTEM 3. After the second call has established, press and hold the UConnect™ button until you hear a double beep indicating that the two calls have been joined into one conference call. Call Termination 1. To end a call in progress, momentarily press the UConnect™ button. Only the active call/s will be terminated and if there is a call on hold, it will become the new active call. 2. If the active call is terminated by the far end, a call on hold may not become active automatically.
SPEECH DIALOGUE SYSTEM Emergency Assistance If you are in an emergency and the mobile phone is reachable: 1. Pick up the phone and manually dial the emergency number for your area. 2. If the phone is not reachable and the UConnect™ system is operational, you may reach the emergency number as follows: 1. Press the UConnect™ hard-key to begin. 2. Wait for the beep. 3. Say EMERGENCY. The UConnect™ system will instruct the paired cellular phone to call the emergency number.
SPEECH DIALOGUE SYSTEM Working with Automated Systems This method is designed to be used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephony system. You can use your UConnect™ system to access a voicemail system or an automated service, such as, paging service or automated customer service. Some services require immediate response selection, in some instances, that may be too quick for use of UConnect™ system.
SPEECH DIALOGUE SYSTEM Dial Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played through your vehicle’s audio system. The UConnect™ system will work the same as if you dial the number using voice recognition.
SPEECH DIALOGUE SYSTEM The navigation radio transfers the call immediately, and you can continue your call on the cellphone. Automatic Transfer Call to UConnect™ System If you have an ongoing call on a cellphone which was paired with the UConnect System before, and the navigation radio is off, turn on the ignition and allow the UConnect system to automatically transfer the call. This may take a few seconds. List All Paired Cellular Phone Names 1. Press the UConnect™ hard-key to begin. 2. Wait for the beep.
SPEECH DIALOGUE SYSTEM return to using the highest priority phone present in or near (approximately with in 30 feet) the vehicle. Delete UConnect™ Paired Cellular Phones You may delete phones via touch screen in the Paired Devices menu. (Refer to the Getting Started section in this manual for more details). This feature allows you to delete a phone from the UConnect™ system. The phone must have been previously paired to the UConnect™ system that you want to delete it from. 1.
SPEECH DIALOGUE SYSTEM • When navigating through an automated system, such as, voice mail, or when sending a page, at the end of speaking the digit string, make sure to say SEND. • Storing names in phonebook when vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnect™ phonebook. • UConnect™ phonebook name tag recognition rate is optimized for the person who stored the name in the phonebook. • You may say “O” (letter “O”) for “0” (zero).
SPEECH DIALOGUE SYSTEM Voice Tree - Main Menu To initiate UConnect™, press the UConnect™ hard-key. In this menu you may say the following commands: • CALL - NAME - NUMBER - EMERGENCY - TOWING ASSISTANCE • DIAL - NAME - NUMBER - EMERGENCY - TOWING ASSISTANCE • PHONE BOOK - NEW ENTRY - EDIT ENTRY - LIST NAMES - DELETE - ERASE ALL • REDIAL • EMERGENCY • TOWING ASSISTANCE • UCONNECT SETUP Voice Tree - Setup Menu To initiate UConnect™, press UConnect™ Phone hard-key. After the system beep, say UCONNECT SETUP.
NAVIGATION SYSTEM Navigation General Notes System Overview Your navigation system receives GPS signals from up to 16 satellites to display the position of your vehicle. Map and database information is supplied through a hard disk drive. A gyroscope and the vehicles speed sensor enable the system to display the present vehicle position even in locations where GPS signals may be blocked. When you input a destination, the navigation system uses map data from the hard disk drive to quickly calculate a route.
NAVIGATION SYSTEM WARNING: Drive with caution, paying attention to the road, obeying all traffic laws! Navigation Main Menu System Limitations The map data that is included with your system is the most recent available at the time of production. Because of changes in streets, neighborhoods, and business locations, there may be situations where the navigation system is not able to route you to your desired destination by the entry method you have chosen. If this occurs, choose another entry method.
NAVIGATION SYSTEM • Destination Entry Touch this soft-key when you want to program a destination. (See the Destination Input section for details.) • Recent Destinations Touch this soft-key when you want to route to a destination you programmed before. (See the Destination Input section for details.) • NAV Settings Touch this soft-key when you want to adjust the settings of the navigation system. (See the Navigation Default Settings section for details.
NAVIGATION SYSTEM Inputting Information Names (e.g., city names or street names) are entered with a smart speller. IMPORTANT NOTE: Use the space symbol as a space between words (e.g., NEW_YORK_CITY). Note: Touch the DEL soft-key to delete a misspelled letter or press the NAV hard-key to go back to the navigation main menu. Note: Touch the 0-9 soft-key to access numbers, and touch the MORE... soft-key to access special characters, if needed.
NAVIGATION SYSTEM Destination Input Overview Destination Entry Screen Press the NAV hard-key to access the NAV -Main Menu. Touch the Destination Entry soft-key to get to the Destination Entry screen. Note: Once you start the destination input you can touch the CANCEL soft-key to cancel the destination input process. At this point, you need to decide what type of destination you would like to enter. A Street Address or a street name with house number.
NAVIGATION SYSTEM Point of Interest allows you to select a destination from a list of locations and public places, or point of interest (POI). Search by place name, by phone number, by category or place type. Use City Center if you want directions to a particular city. The navigation system will calculate a route with the destination at the center of the city. Point on Map allows quick and easy selection of a destination directly from the Map screen.
NAVIGATION SYSTEM Changing State/Province and/or Country If your destination is not in the displayed state and/or country either enter a city name, by touching the USA soft-key in the second row, or the ZIP code (if known), by touching the USA soft-key in the third row of the screen. You can change the state/province and/or country temporarily for the current destination input by touching the STATE, PROVINCE, or COUNTRY soft-key in this menu.
NAVIGATION SYSTEM Touch the C soft-key in the speller, to enter the first letter of the street name (CONSTITUTION AVE NW). In the upper right corner, the number of possible roads decreases. 5. Touch the LIST soft-key to display a list of possible street names. Select CONSTITUTION AVE NW from the list to get to the Input Number menu. The speller displays only numbers contained in the digital map. 6. In this example we have entered 2101 as the house number.
NAVIGATION SYSTEM Destination Input by Intersection For this example we will continue by entering the following intersection: Kaufman Ln and Bridwell Dr, in Louisville, Kentucky. 1. From the Destination Entry menu touch the Intersection softkey to get to the Find Intersection menu. In the Confirm Route screen the navigation radio displays the complete address, a map of the destination area, and the current routing method for you to verify.
NAVIGATION SYSTEM It is possible to select the intersection within the whole country, a city, or a ZIP code area. 2. For this example touch the Within KENTUCKY soft-key. 5. Touch the Enter Name of Street 2 soft-key to enter the second street. The navigation radio will display a list of possible cross streets of the initially entered street. 3. Touch the Enter Name of Street 1 soft-key to enter the first street. 4. Enter “Kaufman Ln” into the speller and confirm the name.
NAVIGATION SYSTEM 6. Select “Bridwell Dr” for this example. 107 If you wish to change your mind and prefer to select a different cross street, you can touch the soft-key with the cross street name to select another cross street. 7. Touch CONTINUE to confirm the intersection and touch GO in the Confirm Route To screen to start the route guidance.
NAVIGATION SYSTEM Destination by Point of Interest A point of interest (POI) can be found in different ways. Close to the current vehicle position (POI Local Area), close to the currently active destination (Nearby Destination), within the map database (POI in Map Area), by POI name, by phone number, and within a city. POI Local Area For this example we will continue by entering a Gas Station close to the vehicle location. 1. While you are in the NAV - Main Menu touch the Where AM I Now? soft-key.
NAVIGATION SYSTEM Select a POI category. For this example select Gasoline. Note: Some categories maybe disabled while the vehicle is in motion. 109 The POI list shows the POI address, the distance to the POI (direct distance - as the crow flies), and a directional arrow. 3. Select one of the Gas Stations from the list and confirm your route by touching the GO soft-key in the confirmation screen.
NAVIGATION SYSTEM POI Nearby Destination For this example we will continue by entering a gas station close to the currently entered destination. 2. Touch the Destination Info soft-key to select the destination info menu. 1. While the system is in guidance mode, touch the OPTIONS soft-key.
NAVIGATION SYSTEM POI in Map Area To select a POI from anywhere on the navigation database map area, select Point of Interest in the Destination Entry screen. 3. Touch the Find POI Near destination soft-key and select a category, pick a gas station from the list and confirm the destination. This is the same process as described in the POI Local Area section. 111 You can find POI’s by the POI name, by type, by the phone number, or by entering a city name.
NAVIGATION SYSTEM Destination Input by Point on Map This feature allows quick and easy selection of a destination directly from the map screen. By selecting a street segment or POI icon, you can quickly enter a destination without the need to input the city name or street. 1. Touch the MAP soft-key in the NAV - Main Menu to access the map. 2. Use the arrows to navigate the center of the cross over the desired destination. 3.
NAVIGATION SYSTEM Destination Input by Geo Coordinate Touch the Geo Coordinate soft-key in the Destination Entry screen. To enter a Geo Coordinate as a destination, simply touch the Lat: soft-key and enter the latitude, then touch the Long: soft-key to enter the longitude. 113 Destination Input by Recent Destinations Touch the Recent Destinations soft-key in the NAV - Main Menu. Touch the soft-key with the name of the desired destination and confirm the route with GO to start the route guidance.
NAVIGATION SYSTEM Destination Input by Address Book Touch the Address Book soft-key in the Destination Entry screen. Select a folder or touch SEARCH to search for the desired contact to enter the destination (see the Address Book section in this manual for more information). Destination Input by Saved Locations Touch the Saved Locations soft-key in the Destination Entry menu. The Saved Locations soft-key is disabled if the saved locations memory is empty.
NAVIGATION SYSTEM Touch the Saved Locations soft-key. 115 Touch the My Favorite Places soft-key to display a list of saved entries. Touch the My Saved Trails soft-key to display a list of saved trail recordings.
NAVIGATION SYSTEM Destination Input by Voice Read the section Speech Dialogue System for details on the SDS. 1. Press the voice recognition hard-key (VR). Wait for the beep and say NAVIGATION. The navigation radio will respond, saying: “Navigation.” The navigation radio has switched to the navigation mode and is now ready to receive navigation-related voice commands. For this example, the default country is set to the US and the default state is set to Michigan. 2. Press the VR hard-key, wait for the beep.
NAVIGATION SYSTEM Guide Me Home Touch the Guide Me Home soft-key in the NAV - Main Menu, and touch the GO soft-key to confirm the route to the home address saved in the address book. See the Getting Started and Address Book section in this manual for information on how to save, clear, or edit the home address. Where Am I Now? The Where Am I Now? menu displays location information for the current vehicle position. Touch the NEARBY POI soft-key to search for a local POI.
NAVIGATION SYSTEM Emergency Info Use this function to locate Emergency Points of Interest, e.g. Hospitals/Medical Facilities, Police Stations, Fire Departments, or Dealerships. 1. Touch the Emergency Information soft-key in the NAV - Main Menu. 2. Select Hospitals, Police Stations, Fire Departments or Dealerships. 3. Read and confirm the disclaimer. Record New Trail The trail function is a feature that allows you to log and save routes in non-digitized areas.
NAVIGATION SYSTEM The system will switch to the map and the trail appears on the map screen as you drive along a route. 2. Touch the MAIN MENU soft-key to switch back to the NAV Main Menu. 119 3. Touch the Stop/Save Trail soft-key.
NAVIGATION SYSTEM • Touch Discard Current Trail to discard the trail and stop the recording. • Touch Continue Recording Trail to continue the recording. 4. Touch Stop and Save Current Trail. The trail will be named with time and date of the recording. 5. Touch the Change Name soft-key to edit the trail name. 6. Touch the DONE soft-key save the trail recording without changing the name. The trail recording is now saved in the Saved Locations Memory.
NAVIGATION SYSTEM Route Guidance After starting route guidance, the system calculates the route and announces: “Follow the arrows on the display.” You will receive navigation recommendations by voice messages and screen displays. Navigation View Settings Press the MENU hard-key to select the NAV Menu. Touch the Full Map soft-key to display a full map during route guidance. Touch the Turn by Turn soft-key to display turn arrows and intersection zooms on the right half of the screen.
NAVIGATION SYSTEM Map Items Press the Map Items soft-key in the NAV Menu to access the Display Items on Map menu. • Touch the Time Remaining soft-key to show or hide the estimated time remaining until you reach your destination. • Touch the Time of Arrival soft-key to show or hide the estimated time of arrival at your destination. Touch the SAVE soft-key to save your changes. • Touch the Map Buttons soft-key to show or hide the Zoom, Map Heading, and the 2D/3D View soft-key.