HI Basic Headunit Manual HMI Spec Team
Faceplate on the headunit 2 3 1 No. 1 Name POWER/VOL Detail description • Use to adjust the power ON / OFF or volume of the product. • To make the AV OFF state, press POWER/VOL knob in the power on state. • To make the AV ON state, press POWER/VOL knob in the AV OFF. • To make the Power OFF state, Long press in the POWER ON state. • To make the POWER ON state, press POWER/VOL knob in the power OFF. • To adjust volume, turn POWER/VOL left or right. Switch to the radio application.
Faceplate on the headunit 1 No. Name 1 SEEK Down / TRACK Up 2 3 4 5 Detail description Radio : Seek next or previous radio channel. Media : Play next or previous media song. Go to the current vehicle map screen is located 2 MAP 3 PHONE 4 BLUELINK 5 DISP Map screen : Announce the requirement guidance. Other screen : Go to the Map screen with current position.
CCP and RRC Controller 1 5 3 2 6 Menu 4 No. Name 1 HOME 2 BACK 3 4 Menu 8 Detail description No. Name Go to the Home Screen. 5 HOME Calls up the Home Screen. on rear screen. Go back to one level up in the menu tree. 6 BACK Takes the user one level up in the menu tree . on rear screen 7 MENU(OPT) On an Application Screen, if the user presses the HK MENU the Menu opens . on rear screen 8 Controller MENU(OPT) Open the menus.
RRC Controller 2 1 3 5 No. 4 6 Name Detail description 1 MODE Switch available media application. Whenever pressing this button, Media are toggled.
Steering Wheel Key 2 1 3 5 No. Name 1 PTT(VR) 2 3 MODE VOL Detail description Under VR: skip voice guide and wait command Waiting VR: reset waiting time and wait command again Short Press Switch available Radio and media application. Whenever pressing this button, Media are toggled.
Room Mirror Key 1 No. Name 1 Blue Link Call 2 TBD 3 SOS 2 3 Detail description Connecting blue link center assistant Connecting blue link emergency assistance.
Layout 4 5 N o. Name 1 Mainbar 2 Main Content Area 2 3 Sub menus in selected application The main window is the major interaction area. 3 Assistant Window Accessed by moving the CCP to the right from content area.
Radio FM/AM 1 1 No. 2 2 1 5 6 7 8 Saved Preset Number . Dial 3 Menu 4 List Save as Preset 6 7 8 Detail description Radio Station Name Playback Radio Frequency. 2 5 3 4 Name Scan Rotate tune knob or CCP to change the radio frequency. Press ‘Menu’ on CCP to show the option menu. Switch to the frequency list mode Saves current frequency in the Preset. Scan’ plays all receivable FM stations 5 sec each. Scan stops automatically when all stations have been played once.
Media 1 No. 2 Name Detail description Available Media Player Sources (CD, DVD, Jukebox, USB, iPod, Bluetooth Audio, Pandora) 1 2 Media Main bar Auto playback How to change the media to play Move CCP Left from main content and select the one of mainbar (Disc CD, Jukebox Music ,Jukebox Video, Jukebox Image) Disc Insert a disc in the disc slot and playback will start automatically. USB Connect a USB device to the USB port and playback starts automatically.
Media 4 3 5 13 11 No. Name 3 Jukebox 4 USB iPod 5 Playback File Information 12 7 8 9 Detail description Storage is the HDD of the headunit. 2 USB Ports are supportive. One is front seat. The other one is rear seat. Note On North America variant, only 1 USB port is supportive. Note CarPlay and iPod If connected iPod is unsupportive the CarPlay, the mainbar displays iPod. Only front USB port is supportive CarPlay. • Disc : Track No, Title, Album Name, Artist.
Media > USB Music playback 1 2 3 4 5 6 7 > Bluetooth Audio playback 8 9 No. Name 1 List 2 Random [Random On] The unit plays randomly all files within current media device. [Random Off] Cancels RANDOM play. 3 Repeat [Repeat On] Plays repeatedly the current file. [Repeat Off] Plays repeatedly all files within current media device. 4 Scan Start scanning playback .
Media No. Name 1 Title Menu 2 > DVD playback 1 2 3 4 5 6 Detail description Go to title menu screen The camera angle changes each time you press the Change Angle menu. 3 Caption Language Switch the desired caption language 4 Voice Language Switch the language of the sound . 5 6 Sound Setting Go to the Sound Setting.
Setting No.
Setting Bluetooth 1 2 3 No. Name Detail description Add New Device Search for BT devices. 1 2 3 Bluetooth Connection Auto Connection Priority Bluetooth Voice Prompts Step 1. Input the passkey (Default:0000). 2. Verify on the screen in your phone when the popup screen is displayed on the screen. 3. When it's successfully connected, you can listen the music on the device or call via BT device. 4. When it's not connected, the connection failure message appears on the screen.
Setting Bluetooth 1 No. Name Detail description Change Device Name Rename the h/u device name to be shown on the phone during connection 1 System Bluetooth Change Passkey info Input the passkey using the keyboard and Press 'OK'. The passkey is shown on the screen in your phone when the pop-up screen is displayed on the screen. Delete all paried devices Remove only paired bt device list. 2 2 Default Reset Reset current bluetooth setting to default setting value.
Setting Blue Link 1 2 3 No. Name 1 2 3 Service Activation Detail description You should enroll the service subscription via Blue Link center before the activation. Modem within the h/u start updating Modem update The H/U displays the Phone number, USIM, IMEI information. Modem information Note Enrolling in Blue Link *you must be an active Blue link subscriber or within the initial free trial period to receive Blue link services, including emergency notification services.
Setting General 1 2 3 No. Name 1 Language setting 2 Screen Saver 3 Rear Seat Control Detail description Change current system language. Note Depends on variant, listed language will be different. When the system is ‘DISP OFF’ state or ‘POWER OFF’ state, configured saver will be displayed. Controls rear seat monitors. Note • Unchecked ‘Lock Rear Controls’ : Unable to control the rear seat controls . • Checked ‘Lock Rear Controls’ : Able to control the rear seat controls.
Setting General No. Name Detail description Choose the distance unit . 1 Distance Unit DVD Menu Language Switch 1 2 DVD-Video DVD Caption Language Switch the desired caption language. DVD Voice Language. Switch the language of the sound. 2 3 System Information 4 Version 5 Jukebox •Provide the software version information, Hard storage. •Upgrade SW. •Reset all setting. The headunit software version information. The capacity informations of headunit Update the software of headunit.
Bluetooth Phone No. 1 2 1 Name Dial 3 2 3 Making a call by entering phone number The most basic way to make a call is to simply dial the number. Connect your unit and Bluetooth phone before you make a call. After input the phone number to dial, Press the 'Call ' button Send button Press for long to make a call from a latest call. Back To Erase one digit at a time, Press and Hold . End To finish the phone conversation, Press the 'End' button.
Bluetooth Phone No. Name Detail description Contacts information is the phonebook entries of the connected phone device. 1 1 2 2 3 4 5 6 7 Contacts Search Note You can use the phone book entries stored on the memory of phone supporting PBAP (Phone Book Access Profile) profile. After connecting your unit and Bluetooth phone via Bluetooth wireless technology, the numbers in your phone’s phone book is transferred automatically into phone book. 1. 2. 3. 4.
Blue Link 1 2 3 No. 1 2 3 Name Send to Car with Google Driving Information Vehicle Diagnostics Detail description Displays "Places" list updated by Google. Displays the deceleration and acceleration driving speed graph.
VR 1 No. 1 Name Giving voice commands Detail description Press on the steering wheel remote control. After the beep sounds, say “Help”. All commands shall be listed which are presented in active fields.
FCC/IC Warning statement in the manual 1. FCC statements (North America) (§15.21) “CAUTION TO USERS” / “FCC WARNING” “Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment “ 2. Canada (IC) statement Manual (required both English and French) This device complies with Industry Canada’s licence-exempt RSSs.
