Manual

User manual
HB-10G Guitar Amplifier
PRECAUTIONS
WARNING:
This appliance must be earthed. Please check that the supply
voltage details given on the rating label (located on the rear
panel) are in accordance with your electricity supply.
INSTRUCTIONS FOR USE:
- Plug the mains lead into a suitable power socket.
- Connect your guitar/bass to the input socket of the amplifier
- Turn the volume control to the left position and the EQ
controls to the middle.
- Power on the amplifier.
- Adjust the volume level with the equivalent volume control to
your desired level.
WARNINGS:
If, after you have followed the instructions outlined above, your
amplifier fails to function, please contact your local distributor.
Under no circumstances remove the rear panel of the amplifier.
Electrical appliances must never be used where there is a
danger of water splashing or dripping onto the unit.
Your attention is drawn to the instructions printed on the notice
attached to the back of the amplifier.
Exposure to extremely high noise level may cause a permanent
hear loss. Individuals vary considerably to noise induced hearing
loss but nearly everyone will lose some hearing if exposed to
sufficiently intense noise for a prolonged time.
© 2004 Musikhaus Thomann - 96138 Burgebrach.
R - 281204 KR
Contact:
Musikhaus Thomann
Treppendorf 30
96138 Burgebrach - Germany
Phone.: [phone]
Fax: [phone]
Web: www.thomann.de
E-mail: [e-mail]