Quick Start Guide

Professional hvlP sPraY GUn kit

Start up Guide

Before first Use

Before everY Use

iteM

93305

Take paint needle

out of gun body.

(Remove the Fluid Nozzle

with a 19 mm Wrench,

sold separately.)

Recommended for use with

oil based paints only.

IMPORTANT: Clean immediately after use, before paint dries in

Spray Gun. (See back for cleaning instructions).

Clean paint needle and

inside gun body with

mineral spirits.

Reassemble.

Thin paint

according to

manufacturer’s

instructions.

Strain paint

before using.

Paint

PAGE 1
Professional hvlp sPRAY GUN kit Start up Guide Before first use C A ITEM 93305 B (Remove the Fluid Nozzle with a 19 mm Wrench, sold separately.) Clean paint needle and inside gun body with mineral spirits. Reassemble. Before every use Thin paint according to manufacturer’s instructions. A B Paint 1 2 3 Take paint needle out of gun body. D Recommended for use with oil based paints only. Strain paint before using. IMPORTANT: Clean immediately after use, before paint dries in Spray Gun.
PAGE 2
immediately after every use 1 2 3 4 IMPORTANT: Clean the paint sprayer after every use while paint is still wet. A B A al ner Mi pirits S B Mi n Sp eral irit s A. Disconnect and empty paint cup. B. Clean with mineral spirits. A. Fill paint cup with mineral spirits and spray through spray gun. B. Repeat until spray shows no paint color. 1 2 A B Solvent Disconnect air hose. A. Disassemble and clean inside of air gun. B. Soak air cap in cleaner and scrub clean.