FCC TEST REPORT Report No.: EMC-FCC-R0075 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval.
SafeVIEW User Manual If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. SEW-3037W English To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product. SEW-3037W-ENGLISH.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 2. 4. 5. 6. 7. SafeVIEW User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Caution : Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents What’s Included Package Contents…………………………………………………… 5 Getting Started Functional Description………………………………………………… 6 Powering your monitor………………………………………………………… 6 Operating the System………………………………………………………… 6 Viewing Mode Display Installation How to Install………………………………………………………… 13 Wireless Monitor……………………………………………………………… 13 Wireless Camera……………………………………………………………… 13 Appendix Specifications……………………………………………………… 14 Troubleshooting…………………………………………………… 15 Indicator Description……………………………………………
01 What’s Included What’s Included Package Contents The system comes with the following components: Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA) Check your package to confirm that you have received the complete system, including all components shown above. English · 5 SEW-3037W-ENGLISH.
Getting Started Functional Description Powering your monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Wireless Monitor You can use the device while charging with connected adapter, and the device is portable if charged. Operating the System The basic operation is as follows: Pairing The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign.
Voice activated (VOX) Sound level The louder the sound around the camera, the more LEDs turn on. 02 Select to monitor significant sound with reduced ambient noise. The screen goes off in “VOX” mode if there is no significant sound louder than a certain level within 1 minute. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In SEW-3036W “VOX” mode, you can set the sensitivity with [ ] in menu.
Viewing Mode Display Indicator Description Displays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format. f Night light Indicates the night light is on. How to use the indicator a b cd e Digital Clock g Monitor Speaker Mute e fg h i j Indicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. h VOX On Indicates the Power / VOX slide switch position is set at “VOX” mode.
SEW-3036W b Camera VOX Sensitivity SEW-3036W ► ► ► Enter menu Move to a Adjust level setting menu Save the change Move to other menu by press [_] or [+] button. 3. Adjust option level by [$] or [%] button. 4. Press [ nn `` ] button to save and complete. If no action more than 20sec, it will be time out back to monitor mode with save.
Overview Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls Monitor Antenna Receives and sends signals from or to the camera. 3.5” LCD Screen Displays video from the camera. Sound Level LEDs Flashes when sound is detected. Power LED Indicator turns green when powered. When battery is charging, this LED will in green color.
Back Controls TALK Button Belt Clip Press down and hold the button to talk back to the camera. When you carry the monitor, use the belt hanger to hold the monitor onto your belt. Kick Stand Speaker Produces the sound transmitted from the camera(s). Use to hold the monitor onto a table. - ON - VOX - OFF DC IN 6V 04 nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
Wireless Camera Front & Back Controls IR LEDs Infrared LED’s provide viewing in no / low light conditions. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Speaker Produces the sound transmitted from the monitor. Night Light Button Turns Night Light ON or OFF. When the camera is powered on, Night Light would be automatically turned on. Camera Antenna Sends & receives signals to or from the monitor.
Installation How to Install 1. 2. CAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor 1. Place the monitor in a place that will have clear reception with your camera(s). 2. Pull out the stand. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. Mount the camera to the wall.
Appendix Item Operating Humidity Range Specifications Environment Rating Item Operating Frequency Range Transmitting Power Monitor Sensitivity Type of Spread Spectrum TX Type of Modulation Data Rate Transmission range Weight System General Details 2400 MHz~2483.
Troubleshooting Problem Solution No picture from a camera 1. 2. 3. 4. 5. The picture is or has become choppy The picture may become choppy when experiencing a lower frame rate (i.e. 10 frames per second vs. a higher 20 frames per second). No sounds (even with both units turned on) 1. Make sure that the power adapter is connected to the camera. 2. The battery on the monitor may be dead, be sure to charge it using the adapter included. 3.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.
TEMPLATE This template is used to install the camera on the wall. Screw holes for the Camera installation CAMERA FRONT SEW-3037W-ENGLISH.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.com SEW-3037W-ENGLISH.indd 18 SAMSUNG TECHWIN EUROPE LTD.