WIRELESS MONITORING SYSTEM User Manual SEW-3035WN , SEB-1018RW
Wireless Monitoring System User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product.
Getting Started What’s Included The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 100m/330ft wireless open space transmission range. The actual range may vary depending on the use environment. • Listen in with exceptional sound clarity • Safety warning feature on monitor notifies you when the camera is out of range of the transmitter.
Getting to know your Monitoring system 01 Wireless Receiver After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Receiver Antenna MENU Button Receives and sends signals from or to the camera. 3.5” LCD Screen Displays video from the camera. Press to access the receiver menu. Press the button again to exit. SEW-3035 Navigation Controls/ Play/Stop Delete Button Microphone Used to delete the recorded data on the Micro SD/SDHC card in search mode.
Back Controls A/M record Antenna Locking Switch Press to auto record or manual record during monitoring. Slide the switch to unlocking position, the receiver antenna will pop up. Then you can adjust the antenna for better signal reception. Night Light Button Press to remotely turn on/off the night light on the camera (for the camera currently being displayed on the LCD screen). When the night light is on, an indication icon will be displayed on the LCD screen.
Wireless Camera Front & Back Controls Camera Antenna Sends & receives signals to or from the receiver. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the receiver. Charging Indication LED LED is off when there is no rechargeable battery inside the camera base; the LED is red when the rechargeable battery pack is charging; the LED turns off when the rechargeable battery is fully charged. n` ` ` Press to turn the night light ON or OFF.
Side Controls Camera ON/OFF Switch Sound Alarm Trigger Turns the camera ON or OFF. Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the sound is above a preset sound level. Adjust to increase or decrease the level of sensitivity. Camera on and low battery indication Turn on the camera, the LED light will blink green once; Low battery, the LED will blink repeatedly. When the camera is turned on, the LED light would appear green.
Installation 2. How to Install Caution if you use the system to watch a young child, do not place the camera where the child can reach. Wireless Receiver Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n` n` 3. Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter.
Viewing Mode Display Auto Mute If you set Auto Mute to , the applicable message appears on the screen. Wireless Receiver SD card status Indicates when a Micro SD card is inserted. It displays the recording type if you press record button. SEW-3035 Signal Indicator The signal indicator shows the strength of the signal being received from the camera.
Menu Operation Zoom Zoom in 1x or 2x of the video image. In double size mode, press the navigation control buttons to pan up/down and left/right while viewing live image. Menu Operation How to use the buttons to setup ► Enter menu setting ► Move to a menu ► Select the menu Power Saving ► Adjust level Save the change Press [MENU] button to enter the menu setting or exit the menu setting. 2. Move to other menu by press [A] or [M] key. ] button for option selection mode. 3. Press the [ 4.
Auto Mute Alarm Setting Alert Setting Date Setting Temperature Unit Date Format Temperature Alert Time Setiing Automatically cuts off the audio when there is only slight environmental noise on the camera side. Choose to enable this function. If auto mute is enabled, the receiver will automatically mute if there is no audio detected from the camera. If the audio is detected on the camera, the receiver will automatically unmute. Select the type of alert when audio is detected on the camera.
A/V Out Format Choose the TV system when outputting the video/ audio to TV, DVR/VCR or other viewing/recording devices. Press the [ ] button on the back of the camera. If not, the receiver will return to the view screen, and no pairing will take place. Once the camera has been paired, it will be immediately viewable on the receiver monitor. Reset Choose to reset the receiver to factory defaults. All menu settings will be reset. Pairing n` Camera pairing settings will NOT be affected by a reset.
Appendix 3. Select “I accept the terms of the license agreement” and then press > button. Hardware and CD driver installation 1. 2. Put CD into CD ROM on computer and click the icon of Install USB Driver to run installation program. Click the > button to continue 4. 5. 6. Click the button, select the destination folder and then press > button. Press the button to complete the driver program.
Troubleshooting If you have problems with the system, there is often a quick and simple solution. Please try the following: Problem No picture from a camera Solution 1. 2. 3. 4. 5. Check all connections to the camera. Make sure the adapter is plugged in. Make sure that the cameras and receiver are both ON. Make sure that the camera is in range of the receiver. If using the battery adapter, try replacing the batteries. Make sure the camera and monitor are paired. 1. Move the camera closer to the receiver.
Specifications Item Camera Details Transmit Frequency Range 2.400GHz~2.4835GHz Data Rate 2.0 Mbps Transmitting Power 16dBm (MAX) Modulation Type GFSK Transmitting Distance 100m (Line of Sight) Image Sensor Type 1/4” Color CMOS Image Sensor Effective Pixels H: 640 V: 480 Image Processing Motion JPEG Image Resolution / Frame Rate H: 640 V: 480 / 15FPS Max (H: 320, V:240 / 30 fps) White Balance Auto Lens 4.9mm / F2.
USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
67mm [2.6 inch] TEMPLATE Screw holes for the Camera installation This template is used to install the camera on the wall.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com SAMSUNG TECHWIN EUROPE LTD.