WIRELESS MONITORING SYSTEM User Manual SEW-3034WN , SEB-1017RW
Wireless Monitoring System User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product.
Getting Started What’s Included The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 100m/330ft wireless open space transmission range. The actual range may vary depending on the use environment. • Listen in with exceptional sound clarity • Safety warning feature on monitor notifies you when the camera is out of range of the transmitter.
Getting to know your Monitoring system Wireless Receiver 01 After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls MENU Button 3.5” LCD Screen Displays video from the camera. SLEEP / Press to access the receiver menu. Press the button again to exit. SEW-3034 Button Used to activate the screen saver mode. Press the [A/M] or [SLEEP] button again to release the screen saver mode.
Back Controls A/M record Antenna Locking Switch Press to auto record or manual record during monitoring. A : Start recording when the alarm is detected. B : Press to the button will be recorded. Slide the switch to unlocking position, the receiver antenna will pop up. Then you can adjust the antenna for better signal reception. Night Light Button Speaker Press to remotely turn on/off the night light on the camera (for the camera currently being displayed on the LCD screen).
Wireless Camera Front & Back Controls Press to turn the night light ON or OFF. Alternatively, press the light button on the receiver to remotely turn the camera light ON or OFF. Infrared LED’s provide viewing in no/low light conditions. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the receiver.
Side Controls Camera ON/OFF Switch Sound Alarm Trigger Turns the camera ON or OFF. Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the sound is above a preset sound level. Adjust to increase or decrease the level of sensitivity. Camera on and low battery indication Turn on the camera, the LED light will blink green once; Low battery, the LED will blink repeatedly. When the camera is turned on, the LED light would appear green.
Installation 2. How to Install Caution if you use the system to watch a young child, do not place the camera where the child can reach. Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` 3. ` Adjust the viewing angle of the camera n ` Do not pull up the stand lever with an excessive force. Otherwise, it may be broken.
Viewing Mode Display Micro SD card status Indicates when a Micro SD card is inserted. It displays the recording type if you press record button. Wireless Receiver A/M record Press to auto record or manual record during monitoring. REC A : Auto Recording - Start recording when the alarm is detected. REC M : Manual Recording - Press to the button will be recorded. SEW-3034 Signal Indicator The signal indicator shows the strength of the signal being received from the camera.
Menu Operation Menu Operation How to use the buttons to setup ► Move to a menu ► Select the menu ► Adjust level Save the change Press [MENU] button to enter the menu setting or exit the menu setting. 2. Move to other menu by press [A] or [M] key. 3. Press the [ 4. Adjust option level by [+] or [–] key. 5. Press the [ ] button for option selection mode. ] button to complete. Buttons used in setup icon Brightness Adjusts the brightness of the image. Zoom Zoom in 1x or 2x of the video image.
Date Format Sets the date format to show in the monitor screen. Pairing Camera 1. Time Setiing Sets the time value with hour, minute to show in the monitor screen. Power on and turn the switch to ON. The power LED for the camera and receiver should be ON. 2. Press the [MENU] button on the receiver. 3. A/V Out Format Choose the TV system when outputting the video/audio to TV, DVR/VCR or other viewing/recording devices. Select Pairing menu by pressing [A] or [M] key.
Appendix Specifications Item Hardware and CD driver installation 1. 2. Put CD into CD ROM on computer and click the icon of Install USB Driver to run installation program. Click the > button to continue Transmit Frequency Range 2.0 Mbps Transmitting Power 16dBm (MAX) Modulation Type GFSK Image Sensor Type 6. Press the button to complete the driver program.
Troubleshooting If you have problems with the system, there is often a quick and simple solution. Please try the following: Problem No picture from a camera Solution 1. 2. 3. 4. 5. Check all connections to the camera. Make sure the adapter is plugged in. Make sure that the cameras and receiver are both ON. Make sure that the camera is in range of the receiver. If using the battery adapter, try replacing the batteries. Make sure the camera and monitor are paired. The picture is dropping 1.
67mm [2.6 inch] Screw holes for the Camera installation TEMPLATE This template is used to install the camera on the wall.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com SAMSUNG TECHWIN EUROPE LTD.
