Software Notes Please ensure that you read the instruction manual carefully before use. ㆍThe attached software is a camera driver and image editing software tool for Windows. ㆍUnder no circumstances should all or part of either the software or the user manual be reproduced. ㆍCopyrights for software are licensed only for use with a camera. ㆍIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the software CD provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ■ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. INFORMATION ● Close other programs before installing the application software. ● Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.
Setting up the application software 4. A window will open. Click the [Next(N) >] button. [Click !] 5. DirectX Installation is completed. Click the [Finish] button and Digimax Master installation will be started. * The system will not reboot even if the [Yes, I want to restart the computer now] option is selected. * The screen shot of step 5 can be different with the illustration according to the system requirements. [Click !] 6. A window where you can choose the program you want to install will appear.
Setting up the application software 8. A window will open. Click the [Next >] button. [Click !] INFORMATION ● If you select [Cancel] at step 8, a window for installing Digimax Reader will be displayed. 9. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse..] and choose a folder you want. [Click !] 10. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button.
Setting up the application software 12. Digimax Master installation is successfully completed. Click the [Finish] button to install Digimax Reader. * The screen shot of step 12 can be different with the illustration according to the system requirements. [Click !] 13. A window will be displayed as shown alongside. Click the [INSTALL] button. - Check the [MANUAL] button. Instructions for using Digimax reader will be displayed.
Setting up the application software 16. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] and choose a folder you want. [Click !] 17. Digimax Reader Installation is completed. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click [Finish]. [Click !] 18. The screen shot of step 17 can be different with the illustration according to the system requirements.
Setting up the application software 21. If you can see [Removable Disk] under [My computer], the camera driver installation was successful. Now you can transfer image files from the camera to PC via the USB cable. INFORMATION ● If you have installed the camera driver, [Found New Hardware Wizard] may not open. ● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied.
Starting PC mode • If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". • In this mode, you can download stored images to your PC through the USB cable. • The LCD monitor is always turned off in PC mode. • The card access lamp will blink when the files are transferring via the USB connection. ■ Connecting the camera to a PC 1. Turn the PC power on. 2. Turn the camera power on. 3.
Starting PC mode ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk → DCIM → 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.
Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1. Trace [Start → Settings] and click [Control Panel]. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window will open. Click [Pro 815] and click the [Add/Remove] button. [Click !] 4. Uninstallation is complete. Click the [Finish] button and the window will disappear.
Removable Disk ■ To use this camera as a Removable Disk, install (p.110) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk ] under [My Computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM →100SSCAM) can be transferred to the PC. INFORMATION Important information whilst using the Removable Disk ● The [Removable Disk] indicator will not show when the camera power is off or the USB cable is removed.
Removing the removable disk ■ Windows 98/ 98SE 1. Check whether the camera and PC are transferring a file. If the card access lamp blinks, you have to wait until the lamp is turned off. 2. Unplug the USB cable. ■ Windows 2000/ ME/ XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have to wait until the lamp is turned off. 2.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. [Click !] Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. This camera is compatible with MAC OS 10.0 or later. 3. Connect the camera to the Macintosh and turn the camera power on. 4.
Digimax Master ■ You can download, view, edit and save your digital image and movie clip with this software. This software is only compatible with Windows. ■ To start the program, click [Start → Programs → Samsung → Digimax Master]. ● Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera and your PC. - To download the captured images, select the [All(A)] button. - Select desired folder in the window and click the [All(A)] button.
Digimax Master 4. Select a destination and make a folder to save downloaded images and folder. - Folders will be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next(N) >] button. [Click !] 6. A window will open as shown alongside. The destination of selected folder will be displayed on the upper side of the window.
Digimax Master ● Image viewer : You can view the stored images. ① ⑤ ⑥ ⑦ ② ③ ④ - Image viewer functions are listed below. ① Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window : You can select desired image in this window. ③ Media type selection menu : You can select image viewer, image edit, movie clip edit function in this menu. ④ Preview window : You can preview a image or a movie clip and check the multi media information.
Digimax Master ● Image edit : You can edit the still image. ① ④ ② ③ - Image edit functions are listed below. ① Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Modify] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu. ② Drawing tools : Tools for editing an image. ③ Image display window : a selected image displays in this window.
Digimax Master ● Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ① ② - Movie clip edit functions are listed below. ① Edit menu : You can select the following menus. [Add] : You can add a desired multi media in a movie clip. [Edit] : You can change the brightness, contrast, colour and saturation. [Effect] : You can insert an effect. [Text] : You can insert texts. [Narration] : You can insert a narration.
Digimax Master ■ Digimax Reader is a Text recognition program. You can save an image file that is captured in the Text mode, as a text file with this program. This software is only compatible with Windows. ■ To start the program, click [Start → Programs → Digimax Reader Eng]. The following screen will appear. ■ How to use the Digimax Reader 1. Connect the camera and the PC with a USB cable and download the images that were stored in the camera to the PC.
Digimax Master 4. Select the image you want to save as a text file. * Only an image that was taken with SAMSUNG camera can be opened. 5. Click the Area Analysis( ) icon to scan the image. 6. Part of the image you selected will be displayed as shown. 7. Click the Character Recognition( ) icon. The part selected in the previous step will be recognized as text. 8. To save the section as a text, click the Save( icon. A window as shown alongside will be displayed.
Digimax Master 9. Select a file type that you want to. Selectable file type : *.TXT, *.HWP, *.DOC, *.RTF INFORMATION ● To get an image that can be recognized as a text : - Keep a distance of 20cm between the subject and the camera. - The subject need to be centered. - Avoid the camera shake to get a good image. ● Refer to the [Help] menu in Digimax Reader for further information. FAQ ■ Please check the following if the USB connection malfunctions. [Case 1] The camera power is off.
FAQ [Case 5] There is an unexpected error during file transfer → Turn the camera power off and on again. Transfer the file again. [Case 6] How do I know my computer supports a USB Interface? → Check the USB port in your computer or keyboard. → Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000, ME .XP. → Check [Universal Serial Bus controllers] in Device Manager. Do the following to check [Universal Serial Bus controllers].
FAQ [Case 9] When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are「Unknown Devices」or「Other Devices」entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. → Right-click on the entry with the question(?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
FAQ ■ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly → If a PC (Windows 98) is turned on for a long time and connect the camera repeatedly, the PC may not recognise the camera. In this case, re-start the PC. ■ If a PC connected with the camera stops responding while Windows is starting. → In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.