UUSSBB PPCC CCaammeerraa IInnssttaallllaattiioonn GGuuiiddee SAMSUNG AEROSPACE -1-
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. N ote: This equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SSAAMMSSUUNNGG UUSSBB PPCC CCaammeerraa IInnssttaallllaattiioonn GGuuiiddee 1. Before the installation ! Note : Install the software first before connecting the amera with P • Check your PC system if it is superior than the following Minimum System Requirements. In case of inferiority, it may cause the installation error or malfunction of the camera.
1) Installing the Power View The autoplay will load the installation window, as shown in right picture. Press “Power View” and select “English”. Power View program will be Installed automatically and come back to the installation window. 2) Installing the Power Album and finishing the installation “Power • Press select “English”. Album” and • Click Next. • Click Next.
• After successful installation, the right window will appear. Click Finish and then the installation window will appear once again. • The software installation is finished completely. Find the finish mark (•) in the installation window and click “Exit”. 3. Connecting the camera with PC [ ] ! Note : Install the software first before connecting the camera with P • Plug the USB cable of camera in USB port of PC.
window will appear. Click Next to continue. ENH-se02.jpg ENH-se03.jpg • Click Next. • Find the mark (•) at “Specify a location” in Wizard window. And click Next. ENH-se04.jpg • Click Next. ENH-se05.
• After successful installation, the right window will appear. Click Finish and then the indicator lamp of camera will turn on. Now you can work with USB PC Camera. ENH-se06.jpg 4. Connecting the camera with PC [ ] • If you connect the camera with PC before software installation ! Note : If you connect the camera with PC before software installation, installation error may occur.
• a) Insert the installation CD-ROM. b) Choose "Specify a location”. c) Click Browse… and select "Driver" folder in the CD-ROM drive. d) Click Next. b c d • Click Next. EH-set06.jpg • Click Finish and then the indicator lamp of camera will turn on. Install the software referring to Page 5-8. the following message during the ! Note : In case of occurring EH-set08.jpg installation, CD- ROM and click OK. OK in the the Windows Insert Disk message window.
2) Remember unfound file name in right window. EH-set10.jpg 3) Select•Start•Find•File or folder•in the task bar. Type the file name at "Named" frame and click Find Now. Specify a location of the file at "Copy files from" frame in above 2) window. And click OK. EH-set11.jpg H-set11.jpg 4) If Insert Disk message window occurs again, repeat the above 1)-3) stages. 4. Starting the program • Select and double-click Samsung USB start.
Power View Power View displays and captures still images & video clips. Also you can send e-mail the captured still images & video clips by it's compression technology without network troubles. Power Album Power Album allows the users to edit the captured still images, and create sticky pictures & photo album. It supplies more 600 clip art images and you can make CD-ROM with edited photo album. ! Note : The installation CD-ROM must be in the CD-ROM drive to run Power Album.
images whenever any motion is detected. Game ! Note : You need another installation procedures for game. It supplies Please referfour to kinds of simple Games with PC Camera, as it is, Shoop, the Installation of Game in Help of Shell program Punch The Clown, Pop The Bubble, BounceIt. Help It provides a guide of using Shell program. Exit Exit Shell program.
7. Specifications •Specifications are subject to change without prior notice.