INSTRUCTIONS Use this camera in the following order Set up the camera driver Before connecting the USB cable to the PC and this camera, you have to set up the camera driver.Install the camera driver that is contained in the Application S/W CDROM. (p.39) Take a picture (p.29~100) Take a picture Insert USB cable Check the camera power Check [Removable Disk] 2 Insert supplied USB cable into PC USB port and the camera USB connection terminal.(p.50) Check the camera power.
Getting to know your camera READY Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. Keep the manual in a safe place. About the symbols This manual contains instructions on using this camera that will help you to use this camera safely and correctly. This will help prevent danger and injury to others. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
About the symbols Icon Mode dial Camera working mode Icon Mode dial Camera working mode Easy mode Program mode Portrait mode Night mode Aperture priority mode Shutter priority mode Manual mode Movie clip mode User set mode Voice recording mode Play mode CAUTION Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire.
WARNING When taking photographs, never point the lens of the camera directly into very strong light. This may result in permanent damage to the camera or your eyesight. For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.: Swallowing batteries or small camera accessories. In case of accidents, please consult a doctor immediately.
DANGER Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it.
SPECIAL FEATURES This digital camera has the following features. READY A fine resolution of 4.0 mega pixels A 3X optical and 2 X digital zoom lens Schneider lens equipped 9 kinds of batteries can be used(First in the world) Super macro(6cm) function 3 kinds of MySET modes An FCC warning This device has been tested in accordance with the limits of a class B digital device under item 15 of the FCC rules.
THIS DIGITAL CAMERA CAN BE USED FOR Viewing images on TV(p.86) Printing images using a dedicated printer, DPOFcompatible printer or DPOFequipped photo lab.(p.74~p.76) Down loading image files from camera to computer.(p.85~p.90) Editing images on a PC.(p.
THIS DIGITAL CAMERA CAN BE USED FOR h READY g g h g g h h h g g h g g g h g g g g g g C ea on o a d g a pho o a bum g g h h h h g g h h h g g h h h h h h h h g g h h g h g g g g g g g g g g h h h h h g g g nse ng mages d ec y n o any e ec on c documen h h h h h h hh Tak ng a se po a and us ng he mage o pe sona ze name ca ds h @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Manufacturer's contents Please check that you have the correct contents before using this product.
Identification of features Power switch (p.18) Shutter button (p.35) Microphone Flash fading control sensor Viewfinder Flash Self-timer lamp Strap eyelet Remote control sensor Lens Back & Bottom Mode dial Lamp Flash indicator lamp(Red) Mode dial (p.30) Autofocus indicator lamp(Green) Viewfinder(p.27) WIDE/THUMBNAIL button (p.36/p.64) TELE/Digital zoom button (p.36/p.64) +&-/PLAY & PAUSE button (p.46) 5-function button MF/ DELETE button (p.46) Speaker MENU/ OK button (p.44/p.
Identification of features Side & Bottom Memory card slot Memory card slot Memory card cover/ Battery chamber cover 5-function button Voice memo/ UP button (p.38/p.66/p.44/p.67) FLASH/ LEFT button (p.37/ p.37) SELF-TIMER/REMOTE/ RIGHT button (p.37/ p.37/ p.37) MACRO/SUPER MACRO/ DOWN button (p.39/p.44/p.
Mode dial EASY Easy mode To make camera operation easier, minimum camera settings need in this mode like image size. ( for printing, memo and email) PROGRAM Program mode In program mode, you can take a properly exposed photograph. Moreover you can set camera setting except aperture and shutter speed. PORTRAIT Portrait mode This is used for only portrait or both portrait and landscape shots. NIGHT Night mode This mode is used at night or against a dark background.
Mode dial A/S/M Aperture priority / Shutter priority / Manual mode Aperture and Shutter can be set manually in the A/ S/ M mode. MOVIE CLIP Movie clip mode A movie clip can be recorded as long as the available recording time allows. Image size and type are listed below. - Image size : QVGA ( 320 x 240 ) - File type : *.AVI MySET User set mode You can set your preferences and save them in this mode. There are 3 kinds of user set mode.
Connecting to Power OPEN 1. Open the battery chamber cover by pushing in the direction of the arrow.
Connecting to Power INFORMATION This camera will automatically switch off when not in use for a period of time. Refer to [POWER OFF] function(p.37). NOTICE Important information about battery usage - Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera. - We recommend high capacity ALKALINE batteries as manganese batteries cannot deliver sufficient power.
Connecting to Power If you have access to a mains supply, using an AC Adapter allows the camera to be used for long periods of time. Plug the adapter into the connection point (DC IN 5V) on the camera. DANGER/NOTE Always turn off the power before taking the AC adapter out of the mains supply. As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials.
Inserting the memory card OPEN 1. Turn off the camera power and pull the memory card cover in the direction of the arrow to open. 2. Insert the memory card all the way into the memory card slot. The Label stuck to the memory card and the front side of the camera should face in the same direction. The memory card pins and the LCD monitor should face in the same direction. OPEN 3. If the memory card does not fit, check that it is inserted correctly. Do not force the memory card.
Instructions on how to use the memory card If you open the memory card cover when the camera power is turned on, the power will turn off automatically. Don t remove the memory card when the Autofocus indicator lamp(Green) is blinking as this may cause damaged data in the memory card. You can use SD memory card and Multi Media Card(MMC). The SD memory card has a write protect switch that prevents image files from being deleted or Card formatted.
Instructions on how to use the memory card Maintenance of the memory card Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.
Selecting the date and time 1. Turn on the power and press the MENU(OK) button. The recording mode menu will be displayed in the RECORDING mode, and the play mode menu will be displayed in the PLAY mode.(There is no associated menu in VOICE RECORDING mode.) 2. Select [SETUP] tab by pressing the RIGHT/button. Select [FORMAT] menu by pressing the DOWN/button. Press the DOWN/again and the next menu page will be displayed.Press the UP/or DOWN/button and select [DATE SET].
Selecting the date and time 4. Select the correct date by pressing the 5-function button. RIGHT/button : selects YEAR/ MONTH/ DAY item. UP/or DOWN/button : changes the value of each item. PORTRAIT SETUP L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT: MENU 5. Press the MENU(OK) button to confirm the setting. To return to the main menu or cancel the setting, press the LEFT/( ) button.
Language 1. Turn on the power and press the MENU(OK) button. The recording mode menu will be displayed in the RECORDING mode, and the play mode menu will be displayed in the PLAY mode.(There is no associated menu in VOICE RECORDING mode.) 2. Select [SETUP] tab by pressing the RIGHT button. Press the UP or DOWN utton and select [LANGUAGE]. PORTRAIT SETUP L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU 3.
Recording mode 25
LCD monitor indicator READY The LCD monitor displays information about the shooting conditions. 161 Image & Full Status No. Description 1 Recording mode p.30 2 Battery p.18 3 Zoom / Digital Zoom 4 Number of available shots remaining Recording time(while recording a movie clip) 5 Image size / Continuous shot 6 Image quality Icons Page p.36 15 0:01:40 (hour : minute : second) p.36 p.49/p.54 p.50 7 Sharpness p.58 8 White Balance p.56 9 Date / Time 10 focus p.
Starting Herecording mode Recording a still image 1. Insert the batteries (p.26). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.29). 3. Close the memory card cover. 4. Slide the power switch to turn on the camera. 5. Select the PROGRAM mode by rotating the mode dial. Program mode 6. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. 7. Press the shutter button to capture an image.
Starting Herecording mode Movie clip mode 161 Movie clip mode Recording a voice Steps from 1-4 are the same as those for recording a still image. 1. Select the VOICE RECORDING mode by rotating the mode dial. 2. Press the shutter button to record a voice. - Press the shutter button once and a voice is recorded for as long as the available recording time allows. The recording time will be displayed on the LCD monitor. - Voice will still be recorded if the shutter button is released.
Starting Herecording mode NOTICE Camera shake warning. When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change the flash mode to flash shot mode. Backlight compensated shot When taking an outdoor shot, avoid facing the sun, as the image may be dark because of the strong backlight.
Using the camera button to adjust the camera READY LCD button You can check the recording status in the LCD monitor. Pressing the LCD button in the RECORDING (EASY, PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MOVIE CLIP, USER SET) mode will change the display as shown below.
WIDE / TELE button Used for digital or optical zooming in / out. This camera has a 3X optical zoom and a 4 X digital zoom function. Using both will offer a total zoom ratio of 12 X. When you press the zoom (W/T) button, the zoom bar will display in the upper centre of the LCD monitor. Zoom TELE Optical zoom TELE - Press zoom button T. This will zoom into the subject i.e. the subject will appear nearer.
WIDE / TELE button 161 Pressing the WIDE button Optical zoom 3X 161 READY Zoom WIDE Optical zoom WIDE - Press zoom button W. This will zoom out from the subject i.e. the subject will appear further away. - Pressing the W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
UP/ Voice memo button When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up or change the sub menu value. When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. Recording a voice memo 1. Rotate the mode dial to the RECORDING( except MOVIE CLIP, VOICE RECORDING) mode. 2. Press the VOICE MEMO button..
DOWN MACRO / SUPER MACRO button Selecting the MACRO/ SUPER MACRO 1. Rotate the mode dial to the RECORDING (except MOVIE CLIP, VOICE RECORDING) mode. 2. Press the MACRO button. The macro indicator will be displayed on the LCD monitor. Press the MACRO button until the desired FLASH mode indicator displays on the LCD monitor. 161 Selecting the macro mode 161 Selecting the super macro mode 3. Take a picture with the desired macro mode.
MACRO( )/ SUPER MACRO button Macro mode setting Camera working mode EASY PROGRAM Setting ( Normal marked camera working mode is the default setting.) Macro PORTRAIT Normal (Fixed) NIGHT SCENE Normal (Fixed) A/ S/ M, USER SET Normal Macro MOVIE CLIP Normal Macro VOICE RECORDING N/A (Not Available) Super macro Super macro INFORMATION When the macro or super macro mode is selected, It is easy to happen the camera shaking. In this case, use a tripod to prevent from the camera shaking.
FLASH button Indicator Flash mode Definition READY Flash mode indicator Indicator If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. Red eye reduction The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions.
FLASH button Flash mode setting Camera working mode Setting ( marked camera working mode is the default setting.) EASY Red eye reduction PROGRAM Auto PORTRAIT Red eye reduction Off Red eye reduction NIGHT SCENE Slow synchro A/ S/ M, USER SET Off MOVIE CLIP Flash off (Fixed) VOICE RECORDING Not Available Fill in Fill in Fill in Slow synchro Off Off Off Slow synchro NOTICE Take photographs within the flash range.
SELF-TIMER/ REMOTE button Selecting the self-timer 1. Rotate the mode dial to the RECORDING (except MOVIE CLIP, VOICE RECORDING) mode. The remote button activates only in the MOVIE CLIP mode. 2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor. 161 Selecting the self-timer mode 161 Selecting the remote mode - Selecting the self-timer mode : Pressing the shutter button will allow an interval of ten seconds before the image is taken.
SELF-TIMER/ REMOTE button Self-timer/ remote mode setting Camera working mode Setting ( marked camera working mode is the default setting.) EASY Off 10s self-timer Off 2s self-timer MOVIE CLIP Off Remote VOICE RECORDING N/A (Not Available) Remote PROGRAM PORTRAIT NIGHT SCENE 10s self-timer Remote A/ S/ M, USER SET INFORMATION Self-timer lamp In 10s self-timer : For the first seven seconds, the LED blinks at one second intervals. For the final three seconds, the LED blinks quickly at 0.
MENU/ OK button 161 Pressing the MENU button PORTRAIT SETUP L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU menu off MyCAM SIZE PAGE : menu on OK button - When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the sub menu or confirming data. INFORMATION The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed.
MF button In dark conditions, the autofocus may not function. If this occours, press the MF button and you can select manual focus. After changing the focus manually, the image can be dim. Take care to use this function. While pressing the MF button, the MF bar will be displayed on the LCD monitor. While pressing the MF button, select desired focus value by pressing the UP/ DOWN button and take a picture. - Pressing the UP button : focus into the long range.
+/- button conditions.However, you can select the exposure value by using this button. You can select the shutter speed and aperture value in the A/S/M mode In the PROGRAM, PORTRAIT, USER SE, A/S/M mode - While pressing the +/- button, select the desired exposure value by pressing the LEFT/ RIGHT button. 161 RECORDING mode Aperture priority mode( A ) - While pressing the +/- button, select the desired aperture value by pressing the UP/ DOWN button.
+/- button Manual mode( M ) - While pressing the +/- button, select the desired shutter speed by pressing the UP/ DOWN button. - While pressing the +/- button, select the desired aperture value by pressing the LEFT/ RIGHT button. In the manual mode, the exposure value can’t be compensated. Refer to page xxx for information on selecting the aperture priority/ shutter priority/ manual mode.
Using the LCD monitor to adjust the camera Main menu RESOLUTION Sub menu Secondary meun PRINT( 2 2 7 2 x 1 5 0 4 /SUPER FINE) Camera working mode EASY MEMO( 1120 x 840 /FINE) E-MAIL( 544 x 408 /NORMAL) PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, USER SET 1/2/3 2 2 7 2 x 1 7 0 4 (LARGE) 2 2 7 2 x 1 5 0 4 (PHOTO) 1 1 2 0 x 8 4 0 (MEDIUM) 544x 408 (SMALL) QUALITY PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, USER SET 1/2/3 TIFF SUPER FINE FINE NORMAL P/A/S/M P/A/S/M USER SET 1/2/3 A/S/M APERTURE A/S/M, USER
Using the LCD monitor to adjust the camera Main menu WHITE BAL EFFECT SHARP. Sub menu AUTO DAYLIGHT CLOUDY FLUOR. TUNGSTEN NORMAL B&W SRGB SUNSET SOFT NORMAL VIVID Secondary meun Camera working mode PROGRAM, A/S/M, MOVIE CLIP, USER SET 1/2/3 PROGRAM, A/S/M, MOVIE CLIP, USER SET 1/2/3 PROGRAM, A/S/M, MOVIE CLIP, USER SET 1/2/3 INFORMATION The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed.
How to use the menu PORTRAIT SETUP MyCAM SIZE QUALITY METERING SHOOTING L 2272X1753 FINE MULTI SINGLE EXIT : MENU PAGE : Pressing the LEFT/ RIGHT button RECORDING mode PORTRAIT SETUP MyCAM SIZE QUALITY METERING SHOOTING L 2272X1753 FINE MULTI SINGLE EXIT : MENU PAGE : Pressing the LEFT/ RIGHT button SETUP mode PORTRAIT SETUP MyCAM SIZE QUALITY METERING SHOOTING L 2272X1753 FINE MULTI SINGLE EXIT : MENU PAGE : MyCAM mode 3. Select a menu by pressing the UP/ DOWN button.
Size You can select the image size you require. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SIZE] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [SIZE] sub menu. EASY mode Select the desired sub menu by pressing the UP/DOWN button.
Quality 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [QUALITY] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [QUALITY] sub menu. PORTRAIT - TIFF : No indicator - FINE : SIZE - SUPER FINE : - NORMAL : Press the OK button to confirm the setting. Press the menu button twice and the menu display will be disappeared. Take a picture.
A/S/M In this mode you can select the shutter speed or aperture value as your preference. 1. Rotate the mode dial to the A/ S/ M mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [A/S/M] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [A/S/M] sub menu. PORTRAIT Select the desired sub menu by pressing the UP/DOWN button. Aperture priority ( A ) : You can select the aperture value in this mode.
A/S/M Shutter priority mode ( S ) - Fast shutter speeds are used in sport photography to stop action. Slow shutter speeds can be used to show the flow of motion such as water cascading over a waterfall. - While pressing the +/- button, select the desired shutter speed by pressing the UP/ DOWN button. - To change the exposure value, press the LEFT/ RIGHT button with pressing the +/- button. - Point the camera towards the subject and compose the image and take a picture.
Metering When the camera cannot calculate a proper exposure, you can change the metering method. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [METERING] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [METERING] sub menu. Select the desired sub menu by pressing the UP/DOWN button.
Shooting Shooting mode is not available in the A/S/M mode. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SHOOTING] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [SHOOTING] sub menu. PORTRAIT SETUP MyCAM Select the desired sub menu by pressing the UP/DOWN button. SIZE L 2272X1753 - SINGLE : you can take only a picture at QUALITY FINE METERING MULTI a time.
Shooting INFORMATION The continuous and AEB shot cannot be selected in the TIFF image quality. If the number of available shots remaining is under 2 pages, the continuous shot Is not activated as the minimum number of the continuous shots are 2. In the AEB shot, the number of available shots remaining have to be over 3 page. It is easy to be the camera shaking in the AEB shot and it takes a lot of time to store the AEB image.We recommend using a tripod.
WHITE BALANCE READY The white balance control allows you to adjust the colors to appear more natural looking. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SHOOTING] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed. 5. Select [WHITE BALANCE] menu by pressing the UP/DOWN button.3.
Effect Using the camera’s digital processor, it is possible to add special effects to your images. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [EFFECT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed. 5. Select [EFFECT] menu by pressing the UP/DOWN button. 6.
Sharpness READY You can select the still image sharpness. 1. Rotate the mode dial to the RECORDING mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SHOOTING] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed. PORTRAIT 5. Select [SHARPNESS] menu by pressing the UP/DOWN button. 6. Press the RIGHT button and the cursor will shift to the [SHARPNESS] sub menu. 7.
MySET mode menu You can select your favorite menus and save them in this menu. Main menu CHANGE Sub menu MYSET2 MYSET3 NO YES Mode You can select your favorite menus that have been saved in this menu. 1. Rotate the mode dial to the MySET mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [MODE] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [MODE] sub menu.
Change READY The loaded MySET menu will be applied to the camera by this menu. 1. Rotate the mode dial to the MySET mode and press the MENU button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [CHANGE] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [CHANGE] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. 6. Press the OK button to confirm the setting.
Play mode 59
Starting Play Mode Playing back a still image 1. Select the PLAY mode by pressing the play mode button. 2. The last image stored on the memory is displayed on the LCD monitor. 161 3. Select an image that you want to play back by pressing LEFT / RIGHT button. INFORMATION Even though the camera power is off, you can start the play mode by pressing the play mode button. The LCD monitor will remain in operation until the camera is switched off in PLAY mode.
Starting the play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 1. Select the movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip file, the movie clip indicator( ) will be displayed on the LCD monitor. 2. Press the play & pause button to play back a movie clip. - To pause playing back a movie clip, press the play & pause button again. - Press the play & pause button and the movie clip will restart.
LCD monitor indicator The LCD monitor displays information about the shooting conditions. READY 161 Image & Basic Status No. Description 1 Play mode Icons Page p.62 2 Battery p.18 3 Running time (movie clip) p.37 4 Image enlargement p.37 5 DPOF indicator p.74 6 Protect indicator p.72 7 Voice memo p.66 8 Voice recording p. 161 SIZE ISO TV AV DATE 1280X1240 AUTO 1/60 F3.0 2000/02/12 SIZE 1280X1240 : image size ISO AUTO : ISO sensitivity TV 1/60 : shutter speed AV F3.
Information button The last image stored on the memory is displayed on the LCD monitor. Pressing the LCD button in the PLAY mode will change the display as shown below. 161 Pressing the information button Image & OSD 161 Pressing the information button Pressing the information button Image only Image & information Thumbnail/ Enlargement/ Trimming button You can view up to 9 images at a time and trim an image. The last image stored on the memory is displayed on the LCD monitor.
Thumbnail/ Enlargement/ Trimming button 161 Trimming : you can extract part of the image that you want and 161 save it separately. - select a part that you want to trim by pressing the 5 function button. Press the OK button and a message will be displayed as shown alongside. - Select [YES] or [NO] by pressing the LEFT/ RIGHT button and press the OK button. - Selecting [YES] : a trimmed image that has the last file name will be displayed on the LCD monitor.
UP/ Voice memo button When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up or change the sub menu value. When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. 161 1. Press the play mode button. 2. Press the 5 function button to select image that you wish to add sound to. Press the voice memo button ( ) and the voice memo indicator will display.
DOWN/ LEFT/ RIGHT button DOWN button When the menu is displayed on the LCD monitor, pressing the DOWNUP button makes the menu cursor move down or change the sub menu value. LEFT button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the main menu. RIGHT button When the menu is displayed on the LCD monitor, pressing the RIGHT button makes the cursor shift to the sub menu.
DELETE button This deletes an image stored on the memory card. 1. Press the play mode button. 2. Press the LEFT/ RIGHT button to select image that you want to delete. 161 3. a message as shown alongside will be displayed on the LCD monitor. 4. To cancel the deletion, press the LEFT button. Press the OK button and a message as shown alongside will be displayed on the LCD monitor. Select [YES] or [NO] by pressing the LEFT/RIGHT button and press the OK button.
PLAY & PAUSE button 1. Press the play mode button. 161 2. Press the LEFT/ RIGHT button to select image that has voice memo, movie clip or voice recording file. 3. Pressing the OK button activates the following. - If an image is showing, but there is no sound (or movement) : plays the sound clip or start the movie clip. - If the image is playing : The progress is paused. - If the PLAY & PAUSE button is pressed when the image is paused, the sound or movement will resume.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. Main menu SLIDE SHOW Sub menu Secondary menu 0 ~ 10 SEC.
Slide show READY Images can be displayed continuously at pre-set intervals. 1.Press the play mode button and press the menu button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SLIDE SHOW] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [SLIDE SHOW] sub menu. PORTRAIT SETUP MyCAM SIZE L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU PAGE : 5.
Protect This is used to protect specific shots from accidental erasing (LOCK).It also releases images that have been previously protected (UNLOCK). 1. Press the play mode button and press the menu button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [PROTECT] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [PROTECT] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button.
Resize 1. Press the play mode button and select an image that you want to resize by pressing the LEFT/ RIGHT button. 2. Press the menu button. 3. Press the DOWN and the cursor will be shifted to the main menu. 4. Select [RESIZE] menu by pressing the UP/DOWN button. PORTRAIT SETUP MyCAM SIZE L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU PAGE : 5. Press the RIGHT button and the cursor will shift to the [RESIZE] sub menu. 6.
Delete all This enables you to clear all unprotected images from the memory. 1. Press the play mode button and press the menu button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [SIZE] menu by pressing the UP/DOWN button. PORTRAIT SETUP MyCAM SIZE L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU PAGE : 4. Press the RIGHT button and the cursor will shift to the [SIZE] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. 6.
DPOF : Standard 1. Press the play mode button and select an image that you want to embed print quantity by pressing the LEFT/ RIGHT button. 2. Press the menu button. 3. Press the DOWN and the cursor will be shifted to the main menu. 4. Select [DEL. ALL] menu by pressing the UP/DOWN button. 5. Press the DOWN button on the [DEL. ALL] menu and the next menu page will be displayed. 6. Select [STANDARD] menu by pressing the UP/DOWN button. 7.
DPOF : Index This function will specify the number of copies (except for movie clips and sound clip) for index print. 1. Press the play mode button and press the menu button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [DEL. ALL] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [DEL. ALL] menu and the next menu page will be displayed. 5. Select [INDEX] menu by pressing the UP/DOWN button. 6.
DPOF : Cancel READY This is used for canceling STANDARD or INDEX DPOF function. 1. Press the play mode button and press the menu button. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [DEL. ALL] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [DEL. ALL] menu and the next menu page will be displayed. PORTRAIT SETUP MyCAM SIZE L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU PAGE : 5.
Setup menu In this mode, you can set up basic settings. * marked sub menu is the default setting. Main menu FILE PWR OFF (Default : 3 MIN) LANGUAGE FORMAT DATA SET TIME SET D.TYPE IMPRINT SOUND LCD VIDEO Q.VIEW Sub meun RESET SERIES OFF / 1~10MIN ENGLISH KOREAN CHINESE 1 CHINESE 2 JAPANESE RUSSIAN GERMANY SPANISH NO YES 2003/01/01 12:00 AM/PM 'YY/MM/DD MM/DD/'YY DD/MM/'YY OFF DATE DATE&TIME ON OFF LOW NORMAL HIGH NTSC PAL p.23 p.23 OFF/ 1~3SEC. DEL.ANSWER (DEL.ANSWER) 77 p.
File READY This enables you to name files 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FILE] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [FILE] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. PORTRAIT SETUP MyCAM SIZE L 2272X1753 QUALITY FINE METERING MULTI SHOOTING SINGLE EXIT : MENU PAGE : 6.
Power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [PWR OFF] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [PWR OFF] sub menu.
Format READY This is used for formatting the memory card. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [FORMAT] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. - Selecting [NO] : The image will be displayed on the LCD monitor.
Format When you format the card in your PC that runs on Windows 2000 or XP, please select FAT file system. If you select FAT 32, the image file may not be recognized on DPOF printer.
Date set READY You can chang the imprinted date. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [DATE SET] menu by pressing the UP/DOWN button. PORTRAIT SETUP MyCAM 6.
Time set 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [TIME SET] menu by pressing the UP/DOWN button. PORTRAIT SETUP MyCAM 6. Press the RIGHT button and the cursor will shift to the [TIME L 2272X1753 SIZE SET] sub menu.
Date type READY You can select date type that is imprinted on the image. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [D.TYPE] menu by pressing the UP/DOWN button. 6. Press the RIGHT button and the cursor will shift to the [D.TYPE] sub menu.
Imprint There is an option to include DATE/TIME on still images. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [IMPRINT] menu by pressing the UP/DOWN button. 6. Press the RIGHT button and the cursor will shift to the [IMPRINT] sub menu.
Sound 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 5. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 6. Select [IMPRINT] menu by pressing the UP/DOWN button. 5. Press the DOWN button on the [IMPRINT] menu and the next menu page will be displayed. 6. Select [SOUND] menu by pressing the UP/DOWN button. 4.
LCD brightness You may adjust the LCD brightness 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [IMPRINT] menu by pressing the UP/DOWN button. 6. Press the DOWN button on the [IMPRINT] menu and the next menu page will be displayed. 7.
Video 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [IMPRINT] menu by pressing the UP/DOWN button. 6. Press the DOWN button on the [IMPRINT] menu and the next menu page will be displayed. 7. Select [VIDEO] menu by pressing the UP/DOWN button. 8.
Connecting to an external monitor Connecting to an external monito In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the video cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically. INFORMATION - When using a TV as an external monitor, you will need to select the external or AV channel of the TV.
Quick view READY You can briefly review the last image captured during the pre-set time. 1. Press the menu button and press the RIGHT button to select [SETUP](Second) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [FORMAT] menu by pressing the UP/DOWN button. 4. Press the DOWN button on the [FORMAT] menu and the next menu page will be displayed. 5. Select [IMPRINT] menu by pressing the UP/DOWN button. 6.
MySET menu You can set up the start up image, start up sound and shutter sound. Start up image You can select the image that is displayed on the LCD monitor whenever the camera is turned on. 1. Press the menu button and press the RIGHT button twice to select [MyCAM](Third) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [S. IMAGE] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [S. IMAGE] sub menu. 5.
Start up sound READY You can select the sound that is activated whenever the camera is turned on. 1. Press the menu button and press the RIGHT button twice to select [MyCAM](Third) tab. 2. Press the DOWN and the cursor will be shifted to the main menu. 3. Select [S. SOUND] menu by pressing the UP/DOWN button. 4. Press the RIGHT button and the cursor will shift to the [S. SOUND] sub menu. 5. Select the desired sub menu by pressing the UP/DOWN button. 6. Press the OK button to confirm the setting.