Delete( ) button This deletes images stored on the memory card. Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Select the submenu values by pressing the UP/DOWN button and then press the OK button. [DELETE] when enabled: deletes the selected images. [CANCEL] when enabled: cancels “Delete Image” Deleting Images in Thumbnail Display Mode 1.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button. The items indicated by Menu tab are default settings. Main menu DEL. ALL Sub menu Secondary menu NO - YES - ONE PIC PROTECT ALL PICS Page p. 52 UNLOCK LOCK p.
Setting up the play back function using the LCD monitor Menu tab Main menu IMAGES Sub menu Secondary menu ONE PIC - ALL PICS - DEFAULT - Page p. 59 POSTCARD SIZE 4X6, 8X10 A6, A4, B5 FULL LAYOUT P I C T INDEX C PLAIN U SETUP B R I D G E S 1, 2, 4, 6, 8 PAPER PHOTO T FASTPHO. O DRAFT M QUALITY p. 60 NORMAL FINE ON DATE OFF ON FILENAME RESET OFF PRINT - p. 58 DPOF PRN - p. 58 NO - YES - p. 58 Menus are subject to change without prior notice.
Deleting all images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. (The files that were stored in the AVATAR folder will not be deleted.) Deleting all images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DEL.ALL] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN DEL.ALL button and press the OK button. NO Selecting [NO] : The display returns to the initial menu.
Protecting images 4. Select the desired secondary menu by pressing the UP/DOWN button and press the OK button. [UNLOCK] : Cancels the protect function. [LOCK] : Sets up the protect function. LOCK - If you select the[ONE PIC] sub menu at step 3, you can EXIT:SH1 protect or unprotect another image by pressing the MOVE PIC: SET:OK LEFT/ RIGHT button. If you press the SHUTTER button, the Image Protection menu will disappear. - If you selected [ALL] in Step 3, the Image Protection menu will disappear.
Resize A stored image size can be changed and used as a logo image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. RESIZE 2048X1536 1600X1200 1024X768 MOVE: SET:OK Image Resize Types INFORMATION A Large image can be resized to be made smaller, but a small image cannot be resized to become larger.
Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. ROTATE 3. Select a desired sub menu by pressing the UP/ DOWN button. OFF ON If [OFF] is selected : Press the OK button to cancel the MOVE: SET:OK image rotation. If [ON] is selected : If you press the OK button, an auxiliary menu from which you can select a rotation orientation will appear.
DPOF : STANDARD This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DPOF DOWN button and press the RIGHT button. STANDARD ONE PIC 4. Use the UP and DOWN buttons to select [ONE PIC] or INDEX ALL PICS SIZE [ALL PICS], and then press the OK button. A window for BACK: SET:OK selecting number of copies.
DPOF : PRINT SIZE You can specify the print size when printing images stored on the memory card. The print size you set will be applied to all pictures stored on the memory card. Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. DPOF 3. Select the [SIZE] menu by pressing the UP/ DOWN STANDARD 3X5 button and press the RIGHT button. INDEX 4X6 SIZE 5X7 4.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES : Setting up the scope of PictBridge PRINTER SETUP : Setting up printing PRINT : Printing pictures DPOF AUTO PRINT : Printing the DPOF files RESET : Initializing the PictBridge functions Connecting the Camera to a Printer 1.
PictBridge: Picture Selection You can select the scope of the PictBridge function. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) PICTBRIDGE 2. The [PICTBRIDGE] menu will appear. IMAGES ONE PIC SETUP ALL PICS 3. Use the UP and DOWN buttons to select [IMAGES], and PRINT then press the RIGHT button. BACK: SET:OK 4. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
PictBridge: Print Setting You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) PICTBRIDGE 2. The [PICTBRIDGE] menu will appear. IMAGES SETUP DEFAULT 3. Use the UP and DOWN buttons to select [PRINTER PRINT CUSTOM SETUP], and then press the RIGHT button. BACK: SET:OK 4.
PictBridge: Picture Printing Printing Pictures 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3. Use the UP and DOWN buttons to select the [PRINT] menu, and then press the OK button. PICTBRIDGE IMAGES SETUP PRINT MOVE: 00 PRINTS CUSTOM SET:OK 4. The screen shown on the right will appear and the picture will be printed.
PictBridge : DPOF AUTO PRINT This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 55 to 57. 1. Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58) 2. The [PICTBRIDGE] menu will appear. 3. Use the UP and DOWN buttons to select the [DPOF PRINT] menu, and then press the OK button. 4. The screen shown on the right will appear and the picture will be printed.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The changed setup mode values will be maintained even if you turn the camera off and then back on. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu RESET FILE p.65 SERIES CANCEL POWER OFF LANGUAGE Page p.
Setup menu Menu tab Main menu Sub menu Secondary menu OFF SOUND Page p.69 LOW MEDIUM HIGH DARK LCD p.69 NORMAL BRIGHT VIDEO NTSC p.70 PAL OFF Q.VIEW 1 ~ 5 SEC USB RESET COMPUTER p.71 DEL.ANS. ON OFF p.72 PRINTER NO p.72 YES File name This function allows the user to select the file naming format. Assigning File Names 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. FILE RESET PWR OFF SERIES 3.
File name INFORMATION The first stored folder name is 100SSCAM, and the first file name is SUC30001. Whenever you store an image, the file number is increased by 1. The file numbers are named from SUC40001 to SUC49999 automatically; 9999 files will be stored in a folder. The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 101SSCAM ~ 999SSCAM. The files used with the memory card conform to the DCF(Design rule for Camera File systems) format.
Language There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or AC adapter are removed and inserted again, the language setting will be preserved. Setting Language 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. ENGLISH FILE 3. Select the [LANGUAGE] menu by pressing the UP/ PWR OFF DOWN button and press the RIGHT button. LANGUAGE FRANÇAIS 4.
Setting up the Date/ Time/ Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/Time & Selecting Date type 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. LANGUAGE 3. Select the [DATE] menu by pressing the UP/ DOWN 04/01/01 12:00 FORMAT button and press the RIGHT button. YY/MM/DD DATE 4.
Imprinting the recording date INFORMATION The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting. TIME is imprinted in the following way: [Hour : Minute : Second] and hours are shown using the 24 hour clock. The imprint function is applied only to still images. Function lamp You can turn on and off the function lamp located on the front of the camera. Setting the function lamp 1.
Sound If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. Setting Operation Sounds 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Setting the Video Out Type 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [VIDEO] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. LCD 3. Select the [Q.VIEW] menu by pressing the UP/ DOWN VIDEO OFF Q.VIEW button and press the RIGHT button. BACK: 4.
Connecting an External Device (USB) You can select an external device to which you want to connect the camera using the USB cable. Selecting an External Device 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] SETUP menu tab. VIDEO Q.VIEW COMPUTER 3. Select the [USB] menu by pressing the UP/ DOWN button USB PRINTER and press the RIGHT button. BACK: SET:OK 4.
Setting up the MYCAM menu You can set up a start up image, start up sound, shutter sound and AVATAR. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. Menu tab Main menu Sub menu Page OFF AVATAR S.IMAGE S.SOUND SH.SOUND P.74 CHANGE OFF IMAGE1 IMAGE2 IMAGE3 OFF SOUND1 SOUND2 SOUND3 OFF SOUND1 SOUND2 SOUND3 P.75 P.76 P.
Avatar Storing Avatars for the Startup Image and Selecting One as the Startup Image 1. In a mode other than Voice Recording mode, press the MENU button. 2. Use the LEFT and RIGHT buttons to select the [MYCAM] menu tab. 3. Select [AVATAR] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. If [NO] is selected : The avatar will not be used as the startup image during power-on.
Avatar Playing Back an Avatar 1. Press the PLAY ( ) button to select Play mode. 2. The last image taken will be displayed on the LCD monitor. 3. Use the LEFT and RIGHT buttons to select an avatar file for playback. PLAY 4. Press the PLAY/PAUSE ( ) button. The selected avatar will be played. - To pause playback of the avatar file, press the PLAY/PAUSE ( ) button again. - During avatar playback, press the LEFT or RIGHT button to rewind or fast-forward the avatar file.
Start up image INFORMATION Only an image that is saved as a LOGO in the [RESIZE] sub menu can be used as the start up image. The logo image will not be deleted by the [DEL.ALL] or [FORMAT] menu. Start up sound You can select the sound that is activated whenever the camera is turned on. Setting the Startup Sound 1. In any mode other than Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [S.
List of camera functions D : Default - : There is no related menu. K : Altered settings and values are maintained even after the camera is turned off. (KEEP) R : A default value is restored when the camera is turned off. (RETURN) O : A default value is restored after the function has been executed. (ONCE) : Settings can be stored in Myset mode.
List of camera functions Camera working mode Function Recording Auto Play Voice Movie recording clip Night Manual Still image Movie clip Voice memo Auto K(D) K(D) K(D) K(D) - - - - Daylight R - K R - - - - White Cloudy R - K R - - - - balance Fluorescent R - K R - - - - Tungsten R - K R - - - - User set R - K R - - - - NORMAL K(D) K(D) K(D) K(D) - - - - EFFECT Sharpness Flash B&W R - K R - - - - SUNSET R - K R - - - - S
List of camera functions Camera working mode Function Self-timer Recording Auto Night Manual Play Voice Movie clip Still image Movie clip Voice memo recording Off K(D) K(D) K(D) K(D) - - - - 2sec R R R - - - - - 10sec R R R - - - - - Voice Do not record - - - - - - - - recording Record - - - - - - - K(D) Voice Do not record K(D) K(D) K(D) - K(D) - - - memo Record R R R K(D) R - - - 80 cm ~ infinity K(D) K(D) K(D) K(D) - - - - 5
List of camera functions Camera working mode Function ONE PIC ALL PICS DEFAULT CUSTOM IMAGES POSTCARD 4X6 8X10 A6 A4 B5 FULL L 1 A 2 Y 4 O 6 U 8 T INDEX PLAIN PAPER PHOTO FAST PHOTO DRAFT QUALITY NORMAL FINE OFF DATE ON OFF FILENAME ON PRINT DPOF PRN C U S T O M I Z E P i c t B r i d g e S E T U P RESET 80 NO YES Movie Recording Auto - Night Manual - - clip - Voice Play Still image Movie clip Voice memo recording K(D) O K(D) O K(D) R R R R R K(D) R R R R R R K(D) R R K(D) R R K(D) R K(D) R
List of camera functions Function Camera working Recording Voice Movie Play mode Auto Night Manual clip Still image Movie clip Voice memo recording Trimming E d i RESIZE t - - - K(D) - - - - - - O - - - - - - - O - - - 1600X1200 - - - - O - - - 1024X768 - - - - O - - - 640X480 - - - - O - - - LOGO - - - - O - - - NO - - - - K(D) - - - YES - - - - O - - - No - - - - O O O - YES - - - - K(D) K(D) K(D) - No - -
List of camera functions Camera working mode Function Date type SOUND LCD VIDEO Q.VIEW RESET AVATAR S.IMAGE S.SOUND SH.SOUND Night Manual Play Movie Voice clip Still image Movie clip Voice memo recording Y/M/D K(D) - M/D/Y K - D/M/Y K - OFF K - LOW K - MEDIUM K(D) - HIGH K - DARK K - NORMAL K(D) - BRIGHT K - NTSC K - PAL K - OFF K - 1 sec. K(D) - 2~5 sec. DEL.ANS.
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes - Memory card error - Turn off the camera power and turn it on again - Insert the memory card again - Format the memory card (p.
Before contacting a service center Please check the following Symptom Causes - There is low battery capacity - An AC Power Adapter is not The camera doesn t connected - Batteries are inserted switch on incorrectly with the reverse polarities. The camera power ceases whilst in use Batteries drain quickly Camera does not take images when pressing the Shutter button The camera suddenly stops working while in use.
Before contacting a service center Symptom Causes Remedy - A picture was taken within 0.8 m from the subject without setting an appropriate macro mode. - Taking a picture beyond the flash range - The lens is smudged or dirty. - If the subject is closer than 0.8m, select macro shot mode.
Before contacting a service center Symptom Causes Remedy Colour of image is different to the original scene - White balance setting is incorrect. - Select appropriate White balance. Images are too bright - Exposure is excessive. - Reset exposure compensation. - Check the connection cables. No image on external monitor - The external monitor has not been connected properly with the camera. - There are incorrect files in the memory card. - Cable connection is incorrect. - The camera is off.
Specifications Type Effective Pixel Total Pixel Image Sensor Focal Length Lens F No. Digital Zoom Optical Viewfinder LCD Monitor Type Viewfinder Focusing Range Type Speed Shutter Control Compensation ISO Equivalent Exposure Manual Modes Range Recharging Time Flash Sharpness Effect White Balance Voice Recording Date Imprinting Still Image Shooting Movie Clip Media Storage File Format Image Size 1/2.5" CCD Approx. 4.1 Mega-pixel Approx. 4.2 Mega-pixel SHD Lens f = 5.8 ~ 17.
Specifications Storage Capacity (32MB) Image Play Type Editing Interface Power Source Dimensions (WxHxD) Weight Operating Temperature Operating Humidity Camera Driver Software Application Special Features 2272 : Super fine 14, Fine 22, Normal 28 2048 : Super fine 19, Fine 28, Normal 38 1600 : Super fine 27, Fine 44, Normal 59 1024 : Super fine 56, Fine 82, Normal 121 640 : Super fine 131, Fine 194, Normal 244 * These figures are measured under Samsung’s standard conditions and may vary depending on
Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyrights for software are licensed only for use with a camera. In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
About the software VideoImpression : Movie clip editing program. You can edit or store movie clips that you download from the camera. This software is only compatible with Windows. Minimum System Requirements CPU Pentium Recommended System Requirements 450Mhz Pentium 700Mhz RAM 64MB 128MB Hard Disk 200MB or more available space 1GB Graphic Card 800x600 pixels, 16-bit colour display compatible monitor Operating System 150MB or more available space Etc.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. INFORMATION Close other programs before installing the application software. Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.
Setting up the application software 5. The Software License Agreement window will open, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage. If you do not agree to the license agreement, click [Disagree]. The installation will be canceled. If the language of your choice is not listed, please select [English]. 6.
Setting up the application software The QuickTime program folder will appear. 10. The QuickTime Settings - Introduction window appears. Click [Next >]. Click on the Close button to close the folder. [Click !] [Click !] 11. Set the transfer rate for downloading content from the Internet, and then click [Next >]. 12. Set up your browser for QuickTime plug-in. Click [Next >]. [Click !] 13. Specify the file types you want to associate with QuickTime. Click [Finish]. [Click !] 14.
Setting up the application software * The QuickTime Player will launch, the readme file will open, and the Step 15 window will open. Click on the Close 1 and Close 2 buttons to exit the program. [Close 1 button] [Close 2 button] 15. A window where you can choose the program you want to install will appear. Click [Install]. For information on application software, please refer to page 100. [Click !] If you select [Exit], the application program installation will be cancelled. 16. The [Digimax Viewer 2.
Setting up the application software 18. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse..] and choose a folder you want. [Click!] 19. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button. If you want to add the program icons to a different folder, choose another folder, and then click [Next >] button. [Click!] 20. Digimax Viewer installation is successfully completed.