Delete ( ) button Printer button ƈThis deletes images stored on the memory. ƈ If you selectd [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the conncection will not be established. In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will be selected. ƃDeleting Images in Play Mode 1.
Left / Right / Menu / OK button ƈ LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an secondary menu.
Setting up the play back function using the LCD monitor Menu tab Main menu ROTATE DPOF COPY TO CARD OSD INFORMATION Sub menu Secondary menu Right 90º - Left 90º - 180º - Horizontal - Vertical - Standard Select / All Pics / Cancel Index No / Yes Size Select / All Pics / Cancel No - Yes - Full - Basic - OSD Off - Page ƈ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.
Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Auto Type Plain Auto Quality SET Draft Normal Fine p.51 Auto Date Off On Auto File name Off On PRINT DPOF PRINT RESET Standard - Index - No - Yes - No - Yes - ſ Menus are subject to change without prior notice. ƈ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1.
Starting the slide show ƃ Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the SLIDE UP / DOWN button and press the RIGHT button. Show OFF 2. Use the Up / Down button to select the type of Interval Effect effect. : Normal display. Back: Set:OK : Image is displayed slowly. : Image is displayed slowly from the centre outwards. : Image moves from the top left. : The image slides diagonally from top left to bottom right.
Deleting images ƈ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ƃ Deleting images 1. Press the play mode button and press the menu DELETE button.
Rotating an image DPOF ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button.
DPOF : Standard DPOF : Index ƈ This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to print is displayed.
DPOF : Print size Copy To Card ƈ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ƈ This enables you to copy image files, movie clips and voice recording files to the memory card. ƃ Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3.
On Screen Display information PictBridge ƈ You can check shooting information about the displayed image. ƃ How to select the type of information you want to see 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. ISO : 50 Av : F 2.
PictBridge : Picture Selection ſ If you selected [Computer] in Step 4, when you connect the camera to your printer, the [Connecting Computer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. Or, press the Printer button and the camera is connected to the printer displaying the [Connecting Computer] message.
PictBridge : Print Setting PictBridge : Printing ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the RIGHT button. 3. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
PictBridge : DPOF print Setup menu ƈ DPOF Print : This allows you to directly print the files with DPOF information. 1. Use the LEFT and RIGHT buttons to select the [DPOF PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [No] : Cancel the printing [Yes] : Directly print the file with the DPOF information DPOF PRINT No Yes ƈIn this mode, you can set up basic settings.
Setup menu Menu tab Main menu USB AF Lamp LCD Video Out Quick View Reset Battery type Sub menu Secondary menu Computer - Printer - Off - On - Dark - Normal - Bright - NTSC - PAL - Off / 0.5, 1, 3 sec - No - Yes - Alkaline - Ni-MH - ſ Menus are subject to change without prior notice. Page p.56 p.56 p.56 p.57 p.57 p.58 p.58 [ File name ] ƈ This function allows the user to select the file naming format. ƃ Assigning File Names 1.
Setup menu [ Auto power off ] [ Language ] ƈ This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. ƈ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. ƃ Sub menus [Off] : The power off function will not operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified.
Setup menu [ Formatting a memory ] [ Setting up the Date / Time / Date type ] ƈ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ƈ You can change the date and time that will be displayed on the captured images and set up the date type. ƃ Sub menus [No] : The memory will not be formatted.
Setup menu [ Sound ] [ Auto Focus lamp ] ƈ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, so that you can be aware of the camera operation status. ƈ You can turn on and off the Auto Focus lamp. ƃ [Sound] sub menu : Off / Low / Medium / High SETUP Language Format Date&Time Imprint Sound Off Low Medium High ƃ Sub menus [Off] : The AF lamp will not light up in a low light condition.
Setup menu [ Selecting Video out type ] ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƈ Connecting to an external monitor ƃ Using the AV cable with Cradle : Connect the camera and the cradle. Connect the cradle to an external monitor with the supplied AV cable.
Setup menu Setting up the Mycam menu [ Initialisation ] ƈ All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed. ƃ Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults. ƈ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu.
Start up sound Important notes ƈ You can select the sound that is activated whenever the camera is turned on. Be sure to observe the following precautions! ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on. ƈThis unit contains precision electronic components. Do not use or store this unit in the following locations.
Important notes ƈ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator ƈThere are several warnings that may appear on the LCD display Card Error! ϛMemory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card. (p.55) Card Locked! ϛThe memory card is locked ƍ SD memory card : Slide the write protect switch to the top of the memory card Low Battery! ϛThere is low battery capacity ƍ Insert fresh batteries.
Before contacting a service centre Camera does not take images when pressing the Shutter button ϛThere is insufficient memory capacity ƍ Delete unnecessary image files ϛThe memory card has not been formatted ƍ Format the memory card (p.55) ϛThe memory card is exhausted ƍ Insert a new memory card ϛThe memory card is locked ƍ Refer to [Card Locked!] error message ϛThe camera’s power is off ƍ Turn the camera power on ϛThe battery are exhausted ƍ Insert fresh batteries.
Before contacting a service centre No image on external monitor ϛThe external monitor has not been connected properly with the camera ƍ Check the connection cables ϛThere are incorrect files in the memory card ƍ Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does not show ϛCable connection is incorrect ƍ Check the connection ϛThe camera is off ƍ Turn the camera on ϛThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3.
Specifications ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ƈ Voice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.
Software Notes About the software Please ensure that you read the instruction manual carefully before use. ϛThe attached software is a camera driver and image editing software tool for Windows. ϛUnder no circumstances should all or part of either the software or the user manual be reproduced. ϛCopyrights for software are licensed only for use with a camera. ϛIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Setting up the application software ƈ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ƈ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English 1588-7276 ___ KIUMZI[MZ^QKM KW SZ [Click!] 1. The auto run frame will display. Click the [Install] menu in the Auto run frame. [Click!] [Click!] [Click!] 2.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. ſ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully.
Starting PC mode ƈ Connecting the camera to a PC Removable disk ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. [Using the USB cable with Cradle] 2. On your computer's desktop display, select [My computer] and double click [Removable Disk ƍ DCIM ƍ 100SSCAM]. The image files will then be displayed.
Removable disk Removing the removable disk 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. ƈ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. 7. An image file is transferred from the camera to your PC. ƈ Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1.
Removing the removable disk Removing the USB Driver for Windows 98SE 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. ƈ To remove the USB driver, refer to the process shown below. 1. Connect the camera and your PC, turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 7. Unplug the USB cable. [Click !] Setting up the USB Driver for MAC 1.
Digimax Master ƈ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master]. ƃ Downloading images 1. Connect the camera to your PC. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded.
Digimax Master ƃ Image viewer : You can view the stored images. ڹ ƃ Image edit : You can edit the still image. ڽ ھ ڹ ڿ ں ڼ ڻ ڼ ں ڻ - Image viewer functions are listed below. ڹMenu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ںImage selection window : You can select the desired images in this window. ڻMedia type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Digimax Master FAQ ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ڹ ƈ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. ƍ Connect the supplied USB cable. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. ƍ Install the camera driver correctly.
FAQ Case 6 Case 7 When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. ƍ Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
MEMO MEMO ŝ75Ş
MEMO ŝ76Ş MEMO
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.